Lincoln 1132-000-A, 1133-000-A, 116-000-A, 1131-000-A, 1130-000-A With Power on and Thermocouple

Page 10

 

 

voltage output at the oven control, check the read-

 

 

out on the control. If the control reads “PROBE

 

 

FAIL”, this indicates that the thermocouple has

 

 

failed or become disconnected from the oven

 

 

control.

 

Thermocouple

Check to be sure that the thermocouple is

 

 

securely connected to the oven control. If the

 

 

thermocouple is connected to the oven control,

 

 

and the control indicates “PROBE FAIL”,

 

 

disconnect the thermocouple from the oven

 

 

control and measure the resistance of the

 

 

thermocouple. The thermocouple should read

 

 

approx. 11Ω. If these readings are not achieved,

 

 

replace the thermocouple. If these readings are

 

 

correct, proceed.

 

Oven control

If the thermocouple checks good, but the oven

 

 

control display indicates that there is a

 

 

thermocouple failure, replace the oven control. If

 

 

the oven control indicates a temperature reading

 

 

but the oven will not heat, proceed.

 

Thermocouple

WITH POWER ON AND THERMOCOUPLE

 

 

ATTACHED TO THE OVEN CONTROL: Measure

 

 

the DC millivolt output of the thermocouple. Refer

 

 

to the thermocouple chart (located in the

 

 

“Removal” section of the manual) for proper

 

 

millivolt readings. If these readings are not

 

 

achieved, replace thermocouple.

 

Oven control

If the thermocouple checks good, but there is no

 

 

120VAC output to the temperature regulation

 

 

valve, replace the oven control. If there is 120VAC

 

 

output to the temperature regulation valve,

 

 

proceed.

 

Temperature regulation valve

Check for 120VAC supplied to temperature

 

 

regulation valve. If voltage is present, listen for

 

 

valve to open and close. Also check for opens or

 

 

shorts in the operating coil. Replace temperature

 

 

regulation valve as needed.

Intermittent heating

Thermal/overload of main fan

The main fan motor and burner blower motor are

 

and burner blower motors

equipped with internal thermal protection and will

 

 

cease to operate if overheating occurs. As the

 

 

motors overheat and then cool, this will cause the

 

 

heating system to cycle on and off intermittently.

 

 

Improper ventilation or lack of preventive

 

 

maintenance may cause this problem. Also, most

 

 

of the problems listed under “Oven will not heat”

 

 

can cause intermittent failure.

Conveyor will not run

Power supply

Check for incoming voltage at line 1 to neutral.

 

 

There should be a reading of 120VAC. If not

 

 

present, check circuit breakers.

 

Fuse, 10 Amp

Check, replace if necessary.

 

Fuse holder

Check, replace if necessary.

 

Hi-limit thermostat, control box

Check for voltage on both sides of switch.

 

 

Terminals are normally closed. If open, reset and

 

 

test oven for proper operation. If thermostat will

 

 

not hold, and control box temperature is not

 

 

exceeding 140°F (60°C), replace thermostat.

 

Power switch

Check continuity between switch terminals.

 

 

Replace switch as needed.

 

Control transformer

Check for 120 VAC supply to the primary of the

 

 

control transformer. If no voltage is present, trace

10

Impinger II – Advantage Digital Service Manual - Domestic

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Impinger Advantage Digital Series NAT. GAS PhaseLP GAS 1130-000-A 208VAC 60 HZ Schematic Diagram Serial Number 2038616 and Above Model 1132-000-A, 1133-000-A Symptom Possible Cause Evaluation Page Valves, the valve should open. Check for gas With Power on and Thermocouple Wiring back to the oven power relay. If voltage is Troubleshooting Guide Electric Ovens Attached to the Oven Control Activate, replace the mercury contactor. Also Discharge before testing Capacitor Replacement MOTOR, Main FAN ReplacementON/OFF Switch Replacement Cooling FAN, Control BOX Replacement Fuse Holder ReplacementTHERMOSTAT, Control BOX HI-LIMIT Replacement THERMOSTAT, Cooling FAN, ReplacementTransformer Control Replacement TRANSFORMER, Burner ReplacementOven Control Replacement Thermocouple ReplacementTemperature Regulation Valve Replacement Burner Control ReplacementGAS Valve Replacement HOT Surface Igniter ReplacementReversing Switch Replacement Bypass Orifice ReplacementMain Burner Orifice Replacement Conveyor Drive Motor ReplacementMercury Contactor Replacement AIR Pressure Switch ReplacementBEARING, Conveyor Replacement Heating Element ReplacementGeneral View Letter Part Number DescriptionPage Control BOX Page Model 1130-000-A, 1131-000-A, 1132-000-A, 1132-000-A Page Oven Back Assembly Page Conveyor / Door
Related manuals
Manual 36 pages 40.03 Kb

1117-000-A, 1132-000-A, 1130-000-A, 1131-000-A, 116-000-A specifications

The Lincoln 1100ADVSVC, 1117-000-A is a cutting-edge vehicle model that reflects the perfect blend of luxury, performance, and advanced technology. Designed for discerning drivers, this model encapsulates what modern automotive engineering can achieve with a focus on sustainability, comfort, and innovation.

One of the standout features of the Lincoln 1100ADVSVC is its powerful hybrid engine that significantly reduces emissions while delivering exceptional performance. The vehicle combines a traditional internal combustion engine with an electric motor, allowing for seamless transitions between fuel types depending on driving conditions. This dual-system not only enhances fuel efficiency but also provides an engaging driving experience, ensuring that power is readily available whenever needed.

The Lincoln 1100ADVSVC is equipped with Lincoln’s renowned all-wheel-drive system, which offers improved traction and stability on various terrains, making it suitable for both urban environments and adventurous outings. This capability is complemented by an advanced adaptive suspension system that automatically adjusts to road conditions, ensuring a smooth and comfortable ride.

In terms of interior features, the Lincoln 1100ADVSVC boasts a lavishly appointed cabin with premium materials and spacious seating for all passengers. The use of high-end leather, meticulously crafted wood accents, and state-of-the-art infotainment options creates an atmosphere of refined luxury. The expansive touchscreen interface integrates seamlessly with connectivity features, allowing easy access to navigation, music, and communication apps.

Safety remains a top priority with the Lincoln 1100ADVSVC. It comes equipped with numerous advanced safety technologies, including adaptive cruise control, lane departure warning, and automatic emergency braking. These features are designed to not only assist the driver but also prevent accidents, providing peace of mind on every journey.

Another noteworthy characteristic of the Lincoln 1100ADVSVC is its emphasis on driver assistance and semi-autonomous features. With the latest advancements in autonomous driving technology, this model offers options that can significantly reduce the need for manual operation in certain driving situations, paving the way for a more relaxed commuting experience.

Overall, the Lincoln 1100ADVSVC, 1117-000-A represents the pinnacle of modern luxury vehicles. With its stunning aesthetics, robust performance, and innovative technologies, it continues to set new standards in the automotive landscape, appealing to those who seek both extravagance and practicality in their driving experience.
Top Page Image Contents