Lincoln 1130-000-A, 1133-000-A, 116-000-A, 1131-000-A Valves, the valve should open. Check for gas

Page 9

 

 

valves, the valve should open. Check for gas

 

 

pressure at the manifold tap located just before

 

 

the burner. If there is no pressure, check the

 

 

incoming gas supply to be sure all manual valves

 

 

are open and flexible gas hose is properly

 

 

connected. If gas is present, and the gas control

 

 

valve is energized, but there is no gas pressure at

 

 

the burner manifold, replace the gas control

 

 

valves.

Flame will not stay lit

Hot surface igniter

Six seconds after the gas valve opens, ignition

 

 

must occur. If flame is not detected, the ignition

 

 

control will shut off and lock out. To reset the

 

 

ignition control, turn off the power switch for 45

 

 

seconds, then turn the switch on to re-try ignition.

 

 

The ignition control requires a minimum of 0.8 DC

 

 

microamps to prove flame. To check flame

 

 

sensing operation, connect a digital multimeter

 

 

(capable of measuring DC microamps) between

 

 

the “ground” terminal on ignition control and the

 

 

ground lead.

 

 

NOTE: This is a current measurement and the

 

 

meter must be connected in series

 

 

If these readings are not achieved, replace hot

 

 

surface igniter.

 

 

NOTE: The DC microamp test must be conducted

 

 

with the oven in low flame (bypass) operation. Set

 

 

the temperature control to the lowest setting.

 

Power supply

If there is sufficient microamp current, but the

 

 

flame will not stay lit, check for proper polarity of

 

 

the 120VAC power supply.

 

Ignition control

If there is sufficient microamp current, and the

 

 

120VAC polarity is correct, but the flame will not

 

 

stay lit, replace the ignition control.

 

 

NOTE: Check for proper ground connection on

 

 

ignition control.

 

NOTE: Flame should be on at

 

 

this time

 

 

 

 

Low flame is on,

Control transformer

Check for 120VAC supply to the primary of the

but no main flame

 

control transformer. If no voltage is present, trace

 

 

wiring back to the main power switch. If voltage is

 

 

present, check for 24VAC at the transformer

 

 

secondary. If there is primary voltage, but no

 

 

secondary voltage, replace the control

 

 

transformer.

 

Oven control

Check for 24VAC supply to control. If no voltage is

 

 

present, trace wiring back to control transformer. If

 

 

24VAC is present, check for a read-out on the

 

 

display. If there is 24VAC supplied, but there is no

 

 

read-out on the control display, replace the oven

 

 

control.

 

 

If there is a read-out on the control, set the control

 

 

to maximum temperature (see installation

 

 

operations manual for temperature adjustment).

 

 

With the control set at maximum temperature,

 

 

check for 120VAC at the temperature regulation

 

 

valve. If there is voltage at the temperature

 

 

regulation valve, proceed to “Temperature

 

 

regulation valve” for next check. If there is no

 

 

voltage at the temperature regulation valve, trace

 

 

wiring back to the oven control. If there is no

Impinger II – Advantage Digital Service Manual - Domestic

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Impinger Advantage Digital Series Phase NAT. GASLP GAS 1130-000-A 208VAC 60 HZ Schematic Diagram Serial Number 2038616 and Above Model 1132-000-A, 1133-000-A Symptom Possible Cause Evaluation Page Valves, the valve should open. Check for gas With Power on and Thermocouple Wiring back to the oven power relay. If voltage is Troubleshooting Guide Electric Ovens Attached to the Oven Control Activate, replace the mercury contactor. Also Discharge before testing MOTOR, Main FAN Replacement Capacitor ReplacementON/OFF Switch Replacement THERMOSTAT, Control BOX HI-LIMIT Replacement Fuse Holder ReplacementCooling FAN, Control BOX Replacement THERMOSTAT, Cooling FAN, ReplacementOven Control Replacement TRANSFORMER, Burner ReplacementTransformer Control Replacement Thermocouple ReplacementGAS Valve Replacement Burner Control ReplacementTemperature Regulation Valve Replacement HOT Surface Igniter ReplacementMain Burner Orifice Replacement Bypass Orifice ReplacementReversing Switch Replacement Conveyor Drive Motor ReplacementBEARING, Conveyor Replacement AIR Pressure Switch ReplacementMercury Contactor Replacement Heating Element ReplacementLetter Part Number Description General ViewPage Control BOX Page Model 1130-000-A, 1131-000-A, 1132-000-A, 1132-000-A Page Oven Back Assembly Page Conveyor / Door
Related manuals
Manual 36 pages 40.03 Kb

1117-000-A, 1132-000-A, 1130-000-A, 1131-000-A, 116-000-A specifications

The Lincoln 1100ADVSVC, 1117-000-A is a cutting-edge vehicle model that reflects the perfect blend of luxury, performance, and advanced technology. Designed for discerning drivers, this model encapsulates what modern automotive engineering can achieve with a focus on sustainability, comfort, and innovation.

One of the standout features of the Lincoln 1100ADVSVC is its powerful hybrid engine that significantly reduces emissions while delivering exceptional performance. The vehicle combines a traditional internal combustion engine with an electric motor, allowing for seamless transitions between fuel types depending on driving conditions. This dual-system not only enhances fuel efficiency but also provides an engaging driving experience, ensuring that power is readily available whenever needed.

The Lincoln 1100ADVSVC is equipped with Lincoln’s renowned all-wheel-drive system, which offers improved traction and stability on various terrains, making it suitable for both urban environments and adventurous outings. This capability is complemented by an advanced adaptive suspension system that automatically adjusts to road conditions, ensuring a smooth and comfortable ride.

In terms of interior features, the Lincoln 1100ADVSVC boasts a lavishly appointed cabin with premium materials and spacious seating for all passengers. The use of high-end leather, meticulously crafted wood accents, and state-of-the-art infotainment options creates an atmosphere of refined luxury. The expansive touchscreen interface integrates seamlessly with connectivity features, allowing easy access to navigation, music, and communication apps.

Safety remains a top priority with the Lincoln 1100ADVSVC. It comes equipped with numerous advanced safety technologies, including adaptive cruise control, lane departure warning, and automatic emergency braking. These features are designed to not only assist the driver but also prevent accidents, providing peace of mind on every journey.

Another noteworthy characteristic of the Lincoln 1100ADVSVC is its emphasis on driver assistance and semi-autonomous features. With the latest advancements in autonomous driving technology, this model offers options that can significantly reduce the need for manual operation in certain driving situations, paving the way for a more relaxed commuting experience.

Overall, the Lincoln 1100ADVSVC, 1117-000-A represents the pinnacle of modern luxury vehicles. With its stunning aesthetics, robust performance, and innovative technologies, it continues to set new standards in the automotive landscape, appealing to those who seek both extravagance and practicality in their driving experience.
Top Page Image Contents