Lincoln 1132-000-A MOTOR, Main FAN Replacement, Capacitor Replacement, ON/OFF Switch Replacement

Page 16

REMOVAL, INSTALLATION AND ADJUSTMENTS

IMPINGER II ADVANTAGE SERIES

CAUTION

BEFORE REMOVING OR INSTALLING ANY COMPONENT IN THE IMPINGER

OVEN BE SURE TO DISCONNECT ELECTRICAL POWER AND GAS SUPPLY.

MAIN FAN – REPLACEMENT

A.Shut off power at main breaker.

B.Remove motor cover from back of oven.

C.Disconnect wiring and mark for reassembly.

D.Remove bolts and slide back straight out of the oven.

E.Loosen the bolt from fan hub and remove fan from motor shaft.

NOTE: Measure distance from fan blade to rear wall assembly before removal to aid in reassembly. F. Reassemble in reverse order and check system operation.

MOTOR, MAIN FAN – REPLACEMENT

A.Shut off power at main breaker.

B.Remove motor cover from back of oven.

C.Disconnect wiring and mark for reassembly.

D.Remove bolts and slide back straight out of the oven.

E.Loosen the bolt from fan hub and remove fan from motor shaft.

NOTE: Measure distance from the fan blade to rear wall assembly before removal to aid in reassembly.

F.Remove four screws from motor support assembly.

G.Remove motor mount clamp and remove motor from oven back.

H.Remove motor mount from motor.

I.Reassemble in reverse order and check system operation.

CAPACITOR – REPLACEMENT

A.Shut off power at main breaker.

B.Remove control box cover and front panel.

C.Discharge capacitor.

D.Remove capacitor.

E.Reassemble in reverse order and check system operation.

ON/OFF SWITCH – REPLACEMENT

A.Shut off power at main breaker.

B.Remove control box cover and front panel.

C.Depress spring clips on sides of switch and push out.

D.Remove wires from switch and mark for reassembly.

E.Reassemble in reverse order and check system operation.

NOTE: Make sure switch housing is fully seated in control box housing.

16

Impinger II – Advantage Digital Service Manual - Domestic

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Impinger Advantage Digital Series NAT. GAS PhaseLP GAS 1130-000-A 208VAC 60 HZ Schematic Diagram Serial Number 2038616 and Above Model 1132-000-A, 1133-000-A Symptom Possible Cause Evaluation Page Valves, the valve should open. Check for gas With Power on and Thermocouple Wiring back to the oven power relay. If voltage is Troubleshooting Guide Electric Ovens Attached to the Oven Control Activate, replace the mercury contactor. Also Discharge before testing Capacitor Replacement MOTOR, Main FAN ReplacementON/OFF Switch Replacement Fuse Holder Replacement THERMOSTAT, Control BOX HI-LIMIT ReplacementCooling FAN, Control BOX Replacement THERMOSTAT, Cooling FAN, ReplacementTRANSFORMER, Burner Replacement Oven Control ReplacementTransformer Control Replacement Thermocouple ReplacementBurner Control Replacement GAS Valve ReplacementTemperature Regulation Valve Replacement HOT Surface Igniter ReplacementBypass Orifice Replacement Main Burner Orifice ReplacementReversing Switch Replacement Conveyor Drive Motor ReplacementAIR Pressure Switch Replacement BEARING, Conveyor ReplacementMercury Contactor Replacement Heating Element ReplacementGeneral View Letter Part Number DescriptionPage Control BOX Page Model 1130-000-A, 1131-000-A, 1132-000-A, 1132-000-A Page Oven Back Assembly Page Conveyor / Door
Related manuals
Manual 36 pages 40.03 Kb

1117-000-A, 1132-000-A, 1130-000-A, 1131-000-A, 116-000-A specifications

The Lincoln 1100ADVSVC, 1117-000-A is a cutting-edge vehicle model that reflects the perfect blend of luxury, performance, and advanced technology. Designed for discerning drivers, this model encapsulates what modern automotive engineering can achieve with a focus on sustainability, comfort, and innovation.

One of the standout features of the Lincoln 1100ADVSVC is its powerful hybrid engine that significantly reduces emissions while delivering exceptional performance. The vehicle combines a traditional internal combustion engine with an electric motor, allowing for seamless transitions between fuel types depending on driving conditions. This dual-system not only enhances fuel efficiency but also provides an engaging driving experience, ensuring that power is readily available whenever needed.

The Lincoln 1100ADVSVC is equipped with Lincoln’s renowned all-wheel-drive system, which offers improved traction and stability on various terrains, making it suitable for both urban environments and adventurous outings. This capability is complemented by an advanced adaptive suspension system that automatically adjusts to road conditions, ensuring a smooth and comfortable ride.

In terms of interior features, the Lincoln 1100ADVSVC boasts a lavishly appointed cabin with premium materials and spacious seating for all passengers. The use of high-end leather, meticulously crafted wood accents, and state-of-the-art infotainment options creates an atmosphere of refined luxury. The expansive touchscreen interface integrates seamlessly with connectivity features, allowing easy access to navigation, music, and communication apps.

Safety remains a top priority with the Lincoln 1100ADVSVC. It comes equipped with numerous advanced safety technologies, including adaptive cruise control, lane departure warning, and automatic emergency braking. These features are designed to not only assist the driver but also prevent accidents, providing peace of mind on every journey.

Another noteworthy characteristic of the Lincoln 1100ADVSVC is its emphasis on driver assistance and semi-autonomous features. With the latest advancements in autonomous driving technology, this model offers options that can significantly reduce the need for manual operation in certain driving situations, paving the way for a more relaxed commuting experience.

Overall, the Lincoln 1100ADVSVC, 1117-000-A represents the pinnacle of modern luxury vehicles. With its stunning aesthetics, robust performance, and innovative technologies, it continues to set new standards in the automotive landscape, appealing to those who seek both extravagance and practicality in their driving experience.
Top Page Image Contents