Lincoln 1000, 1400, 1200 operating instructions Stand and Finger Assembly

Page 11

STAND AND FINGER ASSEMBLY

1.The stand is a 40” (1016 mm) x 49” (1245 mm) rectangle. Set it in place with a 40” side facing out. This will be the front of the oven. Using a carpenter’s level, level all four (4) sides of the stand. To raise or lower the stand use the leg adjusters. Ovens on casters require a level floor. NOTE: The oven top is packed with oven stand. Remove top from stand before assembly.

4.Before installing the retaining brackets in the oven(s), be sure all of the packing material is removed from the plenum shroud. Install the finger retaining brackets by placing them upside down and hooking the retaining pin as shown above.

7.Insert columnating plate so the step goes under the lip of the finger housing and the plate lies flush with the housing side edge.

2.Remove the oven from the dolly and set it on the stand. The control panel should be on the right rear as you face the oven. Be sure that the oven sets squarely on the stand and is fully seated. For a single oven, install top. For double, see step 3.

5.Rotate the finger brackets until the notches in the brackets sit on the retaining pins.

8.Install cover by sliding it on the small end.

3.If you purchased a double stack oven, place the second oven on top of the first one. Be sure that it sets on squarely and is fully seated. The control panel goes on the right rear. Now install oven top.

6.Assemble fingers as shown in steps 7 and 8.

9.Insert assembled finger through door opening starting with lower left. NOTE: The customer MUST tell you what position to place the assembled finger in, for their application.

Impinger I – 1000 Series Ops Manual

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation & Operating Instructions Warranty PURCHASER’S Responsibility Table of ContentsUtility Specifications Required GAS CSA MEA AGA NSF GAS Pressure Conversion ChartCountry Language Code Not Used Model Number KEYVentilation Guidelines SpacingVentilation General Information Test ProcedureLincoln Impinger OVEN, Model Series 1000 1200 Smoke Candle Test Ventilation System VerificationIf There is Apparent Damage Exterior DimensionsManual GAS Valve Installation UnloadingElectrical Code Reference Code ReferenceOperations GAS Code ReferenceStand and Finger Assembly Impinger Finger Columnating Plates Programming the Digital Advantage 1450 Series Touch PAD Finger Housing Baffle Plate AdjustementsAdvantage Model Series 1400 with Analog Controls Preventive MaintenanceImpinger Model Series 1000 Daily Operator MaintenanceCleaning Instructions Information on USE of OvenTo Remove Conveyor Belt Finger Removal and Disassembly for CleaningConveyor Disassembly for Cleaning To Remove Conveyor from OvenTo Install Conveyor in Oven Conveyor ReassemblyConveyor Belt Installation Functions HOW to Obtain ServiceConcepts Appendix a Label Definitions Impinger I 1000 Series Ops Manual
Related manuals
Manual 92 pages 1.67 Kb Manual 92 pages 51.22 Kb

1000, 1200, 1400 specifications

The Lincoln series, particularly the models Lincoln 1000, 1200, and 1400, represents an evolution in luxury vehicles, combining elegance with cutting-edge technology. Each model builds upon its predecessor while introducing features that enhance performance, comfort, and safety.

Starting with the Lincoln 1000, this model set the foundation for the series. It showcased a refined design characterized by sleek lines and an impressive presence on the road. The Lincoln 1000 was equipped with a powerful engine, delivering smooth acceleration and a quiet ride. Interior features included premium materials such as leather upholstery, real wood accents, and a state-of-the-art sound system. Additionally, it offered advanced climate control systems, ensuring passenger comfort. Safety features were also prioritized, with multiple airbags and stability control systems included to enhance driver confidence.

Moving on to the Lincoln 1200, this model took luxury to the next level. The exterior design was more aggressive, with a revised grille and enhanced aerodynamics for better fuel efficiency. The engine options expanded, offering hybrid technology for environmentally conscious consumers without sacrificing power. Inside, the Lincoln 1200 featured an upgraded infotainment system, incorporating a larger touchscreen display along with smartphone integration for connectivity on the go. This model also introduced adaptive cruise control and lane-keeping assist, showcasing Lincoln’s commitment to safety and innovation.

The Lincoln 1400 represents the pinnacle of this series. This model incorporates all the advancements of the previous iterations while introducing next-generation technologies. A hybrid powertrain with electric capabilities provides a quieter, more efficient drive. The design includes sophisticated lighting technology, such as adaptive LED headlights that adjust to road conditions. Inside, the cabin has been transformed into a haven of luxury, with customizable ambient lighting, heated and ventilated seats, and an advanced noise cancellation system for a serene driving experience. Furthermore, the Lincoln 1400 emphasizes driver assistance technology, featuring an array of sensors and cameras to support features like automatic parking and enhanced collision prevention systems.

In conclusion, the Lincoln 1000, 1200, and 1400 models showcase a remarkable journey of luxury and technology, with each iteration bringing forth innovative features and design enhancements that elevate the driving experience. As Lincoln continues to evolve, the commitment to craftsmanship, comfort, and cutting-edge technology remains central to its identity.
Top Page Image Contents