Lincoln Lincoln Impinger OVEN, Model Series 1000 1200, General Information, Test Procedure

Page 8

LINCOLN IMPINGER® OVEN, MODEL SERIES 1000 – 1200 AND 1400

DOUBLE DECK OR SINGLE UNIT CANOPY VENTILATION RECOMMENDATIONS

* AFF = Above Finished Floor

SMOKE CANDLE TEST – VENTILATION SYSTEM VERIFICATION

OVEN SET-UP FOR THIS TEST:

1.This test is to be done on the bottom oven of a multiple oven system, or a single oven.

2.The conveyor must be off.

3.The oven temperature must be set and operating at 550°F/288°C.

TEST PROCEDURE:

Note: Use Lincoln Smoke Candle #369361 (in Australia, an alternate method of coloring the air may be used).

1.Wear heat resistant gloves to prevent burns to your hands.

2.Put the smoke candle in a cake pan approximately 8 inches (200 mm) x 8 inches (200 mm) x 2 inches (50 mm) deep or equivalent.

3.Open the optional access window in the oven door, or insert candle through conveyor opening.

4.Light the fuse of the smoke candle and immediately put the pan and candle into the center of the oven cavity, on the conveyor belt. (Close the access window or door.)

5.Observe the smoke pattern coming out of the oven openings and the collection of this smoke by the ventilation system.

6.The ventilation system must capture all the smoke from the oven.

GENERAL INFORMATION

The instructions that follow are intended as a guide for preparing for the installation of the Impinger® Conveyor Ovens, Series 1000 – 1200 and 1400.

First and foremost, each crate should be examined before signing the Bill of Lading to report any visible damage caused by the trucker in transit, and to account for the proper number of crates.

8

Impinger I – 1000 Series Ops Manual

Image 8
Contents Installation & Operating Instructions Warranty Table of Contents PURCHASER’S ResponsibilityUtility Specifications Required GAS GAS Pressure Conversion Chart CSA MEA AGA NSFModel Number KEY Country Language Code Not UsedVentilation Guidelines SpacingVentilation Test Procedure Lincoln Impinger OVEN, Model Series 1000 1200Smoke Candle Test Ventilation System Verification General InformationExterior Dimensions Manual GAS Valve InstallationUnloading If There is Apparent DamageCode Reference OperationsGAS Code Reference Electrical Code ReferenceStand and Finger Assembly Impinger Finger Columnating Plates Finger Housing Baffle Plate Adjustements Programming the Digital Advantage 1450 Series Touch PADAdvantage Model Series 1400 with Analog Controls Preventive MaintenanceImpinger Model Series 1000 Operator Maintenance Cleaning InstructionsInformation on USE of Oven DailyFinger Removal and Disassembly for Cleaning Conveyor Disassembly for CleaningTo Remove Conveyor from Oven To Remove Conveyor BeltTo Install Conveyor in Oven Conveyor ReassemblyConveyor Belt Installation Functions HOW to Obtain ServiceConcepts Appendix a Label Definitions Impinger I 1000 Series Ops Manual
Related manuals
Manual 92 pages 1.67 Kb Manual 92 pages 51.22 Kb

1000, 1200, 1400 specifications

The Lincoln series, particularly the models Lincoln 1000, 1200, and 1400, represents an evolution in luxury vehicles, combining elegance with cutting-edge technology. Each model builds upon its predecessor while introducing features that enhance performance, comfort, and safety.

Starting with the Lincoln 1000, this model set the foundation for the series. It showcased a refined design characterized by sleek lines and an impressive presence on the road. The Lincoln 1000 was equipped with a powerful engine, delivering smooth acceleration and a quiet ride. Interior features included premium materials such as leather upholstery, real wood accents, and a state-of-the-art sound system. Additionally, it offered advanced climate control systems, ensuring passenger comfort. Safety features were also prioritized, with multiple airbags and stability control systems included to enhance driver confidence.

Moving on to the Lincoln 1200, this model took luxury to the next level. The exterior design was more aggressive, with a revised grille and enhanced aerodynamics for better fuel efficiency. The engine options expanded, offering hybrid technology for environmentally conscious consumers without sacrificing power. Inside, the Lincoln 1200 featured an upgraded infotainment system, incorporating a larger touchscreen display along with smartphone integration for connectivity on the go. This model also introduced adaptive cruise control and lane-keeping assist, showcasing Lincoln’s commitment to safety and innovation.

The Lincoln 1400 represents the pinnacle of this series. This model incorporates all the advancements of the previous iterations while introducing next-generation technologies. A hybrid powertrain with electric capabilities provides a quieter, more efficient drive. The design includes sophisticated lighting technology, such as adaptive LED headlights that adjust to road conditions. Inside, the cabin has been transformed into a haven of luxury, with customizable ambient lighting, heated and ventilated seats, and an advanced noise cancellation system for a serene driving experience. Furthermore, the Lincoln 1400 emphasizes driver assistance technology, featuring an array of sensors and cameras to support features like automatic parking and enhanced collision prevention systems.

In conclusion, the Lincoln 1000, 1200, and 1400 models showcase a remarkable journey of luxury and technology, with each iteration bringing forth innovative features and design enhancements that elevate the driving experience. As Lincoln continues to evolve, the commitment to craftsmanship, comfort, and cutting-edge technology remains central to its identity.