Lincoln 1200 Impinger Model Series 1000, Advantage Model Series 1400 with Analog Controls

Page 14

CONVEYOR

The conveyor for the Digital Advantage oven has a different drive cog than the Full Featured Impinger® oven. The

drive cog on the conveyor for the Digital Advantage oven is a 15 tooth cog where the Full Featured Impinger® oven has a 10 tooth cog.

CAUTION: On installations where a Digital Advantage Oven is stacked with a Full Featured Impinger® oven,

THE CONVEYORS CANNOT BE INTERCHANGED. INTERCHANGING CONVEYORS WILL AFFECT COOKING TIMES.

The conveyor for the Digital Advantage oven will have a label to identify proper use.

ADVANTAGE OVENS

ONLY

REVERSING SWITCH

The Digital Advantage ovens have a belt direction-reversing switch located on the back of the control box.

IMPINGER® MODEL SERIES 1000 AND 1200

START-UP

1.Push switches for FAN, CONVEYOR, and HEAT to “ON.” The electric oven should come on immediately. The gas oven should light in 45-50 seconds.

2.GAS OVEN ONLY! If the indicator lamp does not light, turn HEAT switch off, wait 5 minutes and turn HEAT switch on again.

3.Turn oven dial to desired temperature.

4.Preheat oven for 30 minutes.

5.To set belt speed, slowly adjust oven time dial to reach desired time.

6.After preheat, adjust oven temperature and conveyor to final desired settings.

SHUT DOWN

1.Push switches for FAN, CONVEYOR, and HEAT to “OFF.”

NOTE: Prior to serial #20657 the main fan will continue of run until the internal oven wall temperatures fall below 200ëF / 93ëC. Temperature indicator will show a lower figure than actual wall reading. Temperature display shuts off when oven fan is turned off.

ADVANTAGE MODEL SERIES 1400 WITH ANALOG CONTROLS

START-UP

1.Turn switch on.

2.Turn thermostat to desired setting.

NOTE: For gas ovens, the lamp should light in 45-50 second. If lamp does not light, turn switch off, wait 5 minutes and restart.

3.Preheat oven for 30 minutes.

NOTE: The amber light above the temperature control dial should go on and off indicating heating system operation.

4.Adjust conveyor speed, time control, and readjust if necessary.

SHUT DOWN

1. To shut down, turn off switch.

PREVENTIVE MAINTENANCE

Although this oven has been designed to be as trouble-free as possible, periodic preventive maintenance is essential to maintain peak performance. It is necessary to keep the motors, fans, and electronic controls free of dirt, dust and debris to insure proper cooling. Overheating is detrimental to the life of all components mentioned. The periodic intervals for preventive cleaning may very greatly depending on the environment in which the oven is operating. You must discuss the need for preventive maintenance with your Authorized Service Agency to establish a proper program. If there are any questions that the service agency cannot answer, please contact Lincoln Foodservice Technical Service Department at (800) 678-9511.

14

Impinger I – 1000 Series Ops Manual

Image 14
Contents Installation & Operating Instructions Warranty Table of Contents PURCHASER’S ResponsibilityUtility Specifications Required GAS GAS Pressure Conversion Chart CSA MEA AGA NSFModel Number KEY Country Language Code Not UsedVentilation Guidelines SpacingVentilation Smoke Candle Test Ventilation System Verification Test ProcedureLincoln Impinger OVEN, Model Series 1000 1200 General InformationUnloading Exterior DimensionsManual GAS Valve Installation If There is Apparent DamageGAS Code Reference Code ReferenceOperations Electrical Code ReferenceStand and Finger Assembly Impinger Finger Columnating Plates Finger Housing Baffle Plate Adjustements Programming the Digital Advantage 1450 Series Touch PADAdvantage Model Series 1400 with Analog Controls Preventive MaintenanceImpinger Model Series 1000 Information on USE of Oven Operator MaintenanceCleaning Instructions DailyTo Remove Conveyor from Oven Finger Removal and Disassembly for CleaningConveyor Disassembly for Cleaning To Remove Conveyor BeltTo Install Conveyor in Oven Conveyor ReassemblyConveyor Belt Installation Functions HOW to Obtain ServiceConcepts Appendix a Label Definitions Impinger I 1000 Series Ops Manual
Related manuals
Manual 92 pages 1.67 Kb Manual 92 pages 51.22 Kb

1000, 1200, 1400 specifications

The Lincoln series, particularly the models Lincoln 1000, 1200, and 1400, represents an evolution in luxury vehicles, combining elegance with cutting-edge technology. Each model builds upon its predecessor while introducing features that enhance performance, comfort, and safety.

Starting with the Lincoln 1000, this model set the foundation for the series. It showcased a refined design characterized by sleek lines and an impressive presence on the road. The Lincoln 1000 was equipped with a powerful engine, delivering smooth acceleration and a quiet ride. Interior features included premium materials such as leather upholstery, real wood accents, and a state-of-the-art sound system. Additionally, it offered advanced climate control systems, ensuring passenger comfort. Safety features were also prioritized, with multiple airbags and stability control systems included to enhance driver confidence.

Moving on to the Lincoln 1200, this model took luxury to the next level. The exterior design was more aggressive, with a revised grille and enhanced aerodynamics for better fuel efficiency. The engine options expanded, offering hybrid technology for environmentally conscious consumers without sacrificing power. Inside, the Lincoln 1200 featured an upgraded infotainment system, incorporating a larger touchscreen display along with smartphone integration for connectivity on the go. This model also introduced adaptive cruise control and lane-keeping assist, showcasing Lincoln’s commitment to safety and innovation.

The Lincoln 1400 represents the pinnacle of this series. This model incorporates all the advancements of the previous iterations while introducing next-generation technologies. A hybrid powertrain with electric capabilities provides a quieter, more efficient drive. The design includes sophisticated lighting technology, such as adaptive LED headlights that adjust to road conditions. Inside, the cabin has been transformed into a haven of luxury, with customizable ambient lighting, heated and ventilated seats, and an advanced noise cancellation system for a serene driving experience. Furthermore, the Lincoln 1400 emphasizes driver assistance technology, featuring an array of sensors and cameras to support features like automatic parking and enhanced collision prevention systems.

In conclusion, the Lincoln 1000, 1200, and 1400 models showcase a remarkable journey of luxury and technology, with each iteration bringing forth innovative features and design enhancements that elevate the driving experience. As Lincoln continues to evolve, the commitment to craftsmanship, comfort, and cutting-edge technology remains central to its identity.