Lincoln 1000 Flame Sensor, Burner Ignitor, Transformer 120/24 VAC, Burner Light 24 VAC GAS Ovens

Page 41

FLAME SENSOR

1.Shut off power at main breaker.

2.Remove control panel top and front cover.

3.Remove burner assembly (see burner assembly).

4.Disconnect one (1) wire from flame sensor.

5.Remove flame sensor by removing one (1) mounting nut.

6.Reassemble in reverse order.

NOTE: Be sure flame sensor is not bent or touching any other burner parts.

BURNER IGNITOR

1.Shut off power at main breaker.

2.Remove control panel top and front cover.

3.Remove burner assembly.

4.Remove flame sensor.

5.Remove pilot shield and pilot shield extension.

6.Remove burner igniter.

7.Reassemble in reverse order.

NOTE: Be sure to reconnect burner igniter cable to ignition control.

TRANSFORMER 120/24 VAC

1.Remove control panel top and front cover.

2.Remove control box cover from burner blower motor.

NOTE: The complete burner blower motor assembly, with control box (PN 369359), is no longer available. The blower motor assembly (PN 369265) has been changed to a

burner motor kit (PN 369366). If the burner blower motor or 24V transformer (PN 369531 ) are replaced, the following modifications must be made:

3.Shut off power at main breaker.

4.Remove control box and components from burner blower motor.

5.Mount transformer on air switch bracket (use transformer as template).

6.Discard control box and relay. Material needed: #29 drill bit and #8 x 3/8" self tapping screws (3 each)

7.See Burner blower motor section for wiring information.

8.Replace covers and check system operation.

BURNER LIGHT (24 VAC) - GAS OVENS

1.Shut off power at main breaker.

2.Remove control panel top and front panel.

3.Remove access cover.

4.Remove two wires from burner light, note number and location.

5.Grasp body of light assembly and slide sideways to remove.

6.Reassemble in reverse order and check.

HEAT LIGHT (125 VAC) - ELECTRIC OVENS

1.Shut off power at main breaker.

2.Remove control panel top and front panel.

3.Remove two (2) wires from heat light, note number and location.

4.Grasp body of light assembly and slide sideways to remove.

5.Reassemble in reverse order and check.

THERMOSTAT, Hl-LIMIT - ELECTRIC OVENS

1.Shut off power at main breaker.

2.Remove control panel top and front cover.

3.Remove the two-(2) wires from the thermostat located on the back wall of the control box.

4.Remove two (2)-mounting screws.

5.Reassemble in reverse order.

NOTE: Be sure to press red "reset" button on new thermostat to ensure that it is in the "closed" position.

Impinger I -–1000 Series Service Manual - Domestic

41

Image 41
Contents Impinger Conveyor Ovens Table of Contents Model 1200 120/230 VAC 60HZ Natural GAS/DUAL Belt Power SupplyModel 1204 120/230 VAC 60HZ Natural GAS/DUAL Belt Control BOX AutoTime Temp Display TemperatureHeat Circuit ControlModel 1240 120/230 VAC 60HZ Natural GAS/DUAL Belt Conveyor DriveTIME/TEMP Display TIME/TEMP Time Temp Display Schematic / 1000 Schematic / 1004 Schematic / 1022, 1023 S/N Q19077 & below Schematic / 1022, 1023 S/N Q19078 & Above Schematic / 1040, 1041 S/N Q14279 & below Schematic / 1040, 1041 S/N Q14280 & Above Schematic / 1200 Schematic / 1202, 1203 S/N Q14790 & below Schematic / 1202, 1203 S/N Q14791 & Above Schematic / 1204 Schematic / 1240, 1241 S/N Q14279 & below Schematic / 1240, 1241 S/N Q14280 & Above GAS Ovens Troubleshooting Guide 1000Symptom Possible Cause Evaluation Johnson Controls For ovens withIgnition Control Honeywell IgnitionControl FlameFor ovens with Temperature ControlMechanical ThermostatCode Electric Ovens Model Series 1000 Troubleshooting GuidePage Page Page Page Page Page MOTOR, Main FAN REMOVAL, Installation & AdjustmentsCAPACITOR, Motor FAN, MainAbove GAS Above Electric Cool Down SwitchFAN Spider FAN HUB Cone RELAY, D.P.S.TBurner Blower Motor THERMOSTAT, Cooling FANBlower WHEEL, Burner To Remove the Blower Wheel for Periodic CleaningAIR Pressure Switch GAS Control Valve Burner AssemblyManifold PRESSURE-ADJUSTMENT Temperature Control Valve Robert Shaw Manifold Pressure AdjustmentTemperature Control Board Solenoid ValveTHERMOCOUPLE- Replacement Temperature Control Potentiometer ReplacementThermocouple Measurement Chart Mercury ContactorIgnition Control Heating Element24V GND Burner Ignitor Flame SensorTransformer 120/24 VAC Burner Light 24 VAC GAS OvensPilot Orifice Burner Conveyor Motor Replacement Bodine SNMain Orifice Burner Potentiometer Conveyor Speed ControlCoupling and Encoder Disc Conveyor Motor Replacement Baldor 1000 Series SN 4390Series SN 4390 TACH. Generator Optical Encoder AssemblyConveyor Motor Control Board Motor Control Board CalibrationREG MIN MAX Style 2 and Style 3 Control Board Adjustment Style 1 Control Board AdjustmentMotor Control Board StyleStyle DIP Switches Control Switch Position OFF Mini Circuit Breaker Reversing Conveyor DirectionBEARING, Conveyor Drive ENDSN 2164 and Above Hall Effect Sensor ReplacementTRANSFORMER-STEPPER Motor Control OLD StyleThermistor Replacement Temperature Gauge ReplacementOven Temperature TRANSFORMER, TIME/TEMP. DisplayType OFF Switch SettingsALL 1000 & 1200 Series Ovens Bottom of Time Temp Display SWITCH, DISPLAY, SETSwitch Replacement FAN Switch Update Dip SwitchSwitch Replacement FAN, HEAT, Conveyor GAS Valve Replacement and Adjustments High Limit Thermostat Replacement Ignition Control ReplacementSpark Generator Replacement Solenoid Valve ReplacementPilot Light 220V Replacement Burner Alarm Light ReplacementIgniter Sensor Assembly Replacement Burner Blower Motor ReplacementTemperature Control Replacement Relay ASSEMBLY, Burner Blower Motor ReplacementRELAY, GAS Control Replacement Model 1046,1047 Time Delay RELAY, 20 Minute ReplacementThis page intentionally left blank Letter Description Parts / Model Series 1000 & 1200 GeneralBlow UP / 1000, 1200 General Parts / Access Door & 1050 Door Blow UP / Access Door & 1050 Door Parts / Model 1000,1001,1050,1051,1004, &1005 S/N 100 to Blow UP / 1000, 1001, 1050, 1051, 1004, & 1005 S/N 100 to Parts / Model 1000,1001,1004, and 1005 S/N 4390 & Above Blow UP 1000, 1001, 1004, 1005 S/N 4390 & Above Parts Blow UP / 1022 369247 Shaft Lock Ring Blow UP / 1040 Parts / 1200, 1201, 1204 Blow UP / 1200, 1201, 1204 Parts Blow UP / 1202 Electronic Temperature Control Blow UP / 1240 Parts / Oven Back GAS Blow UP / Oven Back GAS Parts / Oven BACK- Electric Blow UP / Oven Back Electric Parts / Conveyor Motor Assembly S/N 4390 & Above Blow UP / Conveyor Motor Assembly S/N 4390 & Above Parts / Series 1000 Conveyor Blow UP / Series 1000 Conveyor See Parts / Series 1200 Conveyor ControlBlow UP / Series 1200 Conveyor Control Parts / Series 1200 Conveyor Blow UP / Series 1200 Conveyor This page intentionally left blank This page intentionally left blank
Related manuals
Manual 20 pages 1.12 Kb Manual 92 pages 51.22 Kb

1000, 1200, 1400 specifications

The Lincoln series, particularly the models Lincoln 1000, 1200, and 1400, represents an evolution in luxury vehicles, combining elegance with cutting-edge technology. Each model builds upon its predecessor while introducing features that enhance performance, comfort, and safety.

Starting with the Lincoln 1000, this model set the foundation for the series. It showcased a refined design characterized by sleek lines and an impressive presence on the road. The Lincoln 1000 was equipped with a powerful engine, delivering smooth acceleration and a quiet ride. Interior features included premium materials such as leather upholstery, real wood accents, and a state-of-the-art sound system. Additionally, it offered advanced climate control systems, ensuring passenger comfort. Safety features were also prioritized, with multiple airbags and stability control systems included to enhance driver confidence.

Moving on to the Lincoln 1200, this model took luxury to the next level. The exterior design was more aggressive, with a revised grille and enhanced aerodynamics for better fuel efficiency. The engine options expanded, offering hybrid technology for environmentally conscious consumers without sacrificing power. Inside, the Lincoln 1200 featured an upgraded infotainment system, incorporating a larger touchscreen display along with smartphone integration for connectivity on the go. This model also introduced adaptive cruise control and lane-keeping assist, showcasing Lincoln’s commitment to safety and innovation.

The Lincoln 1400 represents the pinnacle of this series. This model incorporates all the advancements of the previous iterations while introducing next-generation technologies. A hybrid powertrain with electric capabilities provides a quieter, more efficient drive. The design includes sophisticated lighting technology, such as adaptive LED headlights that adjust to road conditions. Inside, the cabin has been transformed into a haven of luxury, with customizable ambient lighting, heated and ventilated seats, and an advanced noise cancellation system for a serene driving experience. Furthermore, the Lincoln 1400 emphasizes driver assistance technology, featuring an array of sensors and cameras to support features like automatic parking and enhanced collision prevention systems.

In conclusion, the Lincoln 1000, 1200, and 1400 models showcase a remarkable journey of luxury and technology, with each iteration bringing forth innovative features and design enhancements that elevate the driving experience. As Lincoln continues to evolve, the commitment to craftsmanship, comfort, and cutting-edge technology remains central to its identity.