Cleaning & Maintenance, How to Defrost

How to Defrost

•Water contained in food, or air that was let inside the refrigerator by opening the door repeatedly may cause a layer of frost to form inside. If the frost gets to thick, it might weaken the structure of the refrigerator. If the frost layer becomes thicker than 1/5”, defrost the refrigerator (See next paragraph for more details on defrosting your refrigerator)

•Defrosting the refrigerator is done manually. Before starting the defrosting process, take all the food and the ice tray out of the refrigerator. Next, turn the temperature control knob to the "OFF" position (the compressor will stop working) and leave the door open until the ice and/or frost melt. Wipe the melted ice and/or frost from the bottom of the freezer compartment with a soft cloth. In case you want to speed up the melting process, place a bowl of warm water (about 50 degrees celsius) in the freezer compartment. Once you have cleaned the freezer compartment (no water is left), make sure to turn the temperature control knob back to its original position

•It's inadvisable to heat the freezer chamber directly with hot water or hair dryer while defrosting to prevent deformation of the inner case

•It's inadvisable to scrape off the ice and/or frost buildup with sharp objects. Using sharp objects might damage the inner casing of the refrigerator or the evaporator surface

•In case of power failure, minimize opening the door. If the power failure is of a long duration, protect the food by placing blocks of dry ice on top of the packages. Frozen foods which have thawed completely should not be refrozen

Reversing the Door Swing of Your Refrigerator

This Refrigerator gives you the option of changing the door swing direction. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please follow these steps:

Note: Skip step 1 if you have not yet installed the handle

1.Remove the hinge cover located on the top of the refrigerator

2.Unscrew hinge on the top of the fridge and the bottom of the fridge and then remove door

3.Remove the plastic cover located in the position where the hinge will be moved too and remove the white screw hole covers from the top of the cabinet frame

4.Pick-up the door and hold it against the frame as if it was attached

5.While the door is held against the frame, insert the hinge into the left side of the door frame and cabinet and tighten all the screws

6.Also tighten all screws at the bottom of refrigerator cabinet

7.Put the hinge cover on top of the hinge and make sure it is securely attached

8.Take the plastic cover and the screw hole cover you removed in step 3 and insert them into the holes left by the removed hinge on the top right side of the cabinet

Cleaning & Maintenance

•The refrigerator should be cleaned and maintained regularly

•When performing maintenance, make absolutely sure that the power plug is first disconnected from the power outlet

•Wipe the outer surface of the refrigerator a dry cloth. Wipe the inner surface of the refrigerator and its accessories with a wet cloth. If they are too dirty, scrub them with neutral detergent, and then clean them with water and dry them with a clean cloth.

•Do not use hot water, scouring pads, powdered cleaners, bleach, cleaners containing bleach, abrasive cleaners, and concentrated detergents to clean the exterior of the refrigerator. Do not use abrasive cleaners, concentrated detergents, bleach, cleaning waxes, solvents or polish cleaners to

MF7018-3 specifications

The Magnasonic MF7018-3 is an innovative and compact digital projection clock radio that combines functionality with modern design. Designed for convenience and ease of use, this model appeals to those who are always on the go yet prefer to have reliable timekeeping and entertainment options at their fingertips.

One of the standout features of the MF7018-3 is its large, easy-to-read LED display. This display provides a clear view of the time, ensuring that users can quickly glance at it without straining their eyes. The brightness is adjustable, allowing personalization to suit individual preferences, which is particularly useful for those who are sensitive to light during the night.

The clock radio is equipped with multiple alarm settings, accommodating different wake-up times for multiple users. This feature allows users to set distinct alarms for weekdays and weekends, providing a seamless transition between schedules. The gentle wake option gradually increases the alarm volume, making waking up a more pleasant experience.

The MF7018-3 also boasts Bluetooth connectivity, enabling users to stream their favorite music, podcasts, or audiobooks directly from their smart devices. This versatility makes it an ideal bedside companion for entertainment and relaxation purposes. Additionally, it supports FM radio, allowing users to listen to their favorite stations with excellent sound quality.

Another key characteristic of the Magnasonic MF7018-3 is its built-in USB charging port. This convenient feature allows users to charge their devices overnight without requiring an additional power outlet.

In terms of design, the MF7018-3 is compact and stylish, making it suitable for any bedroom or workspace. The sleek finish adds a modern touch, blending well with various decor styles.

Lastly, the simplicity of the MF7018-3 ensures user-friendliness. Setting the time and alarms is straightforward, thanks to its intuitive controls.

In summary, the Magnasonic MF7018-3 combines essential features such as a large LED display, multiple alarms, Bluetooth connectivity, FM radio, and a USB charging port, all wrapped in a sleek design. Whether used as a clock radio or a music player, it stands out as a reliable and stylish choice for contemporary lifestyles.