SETTING THE CLOCK AND TIMER
Clock
To set the time-of-day clock:
1.Press the CLOCK pad once. The words “Set Time” will flash in the display.
2.Set the correct time of day using the ▲ and ▼ pads.
•To change the time by one minute, press either pad once.
•To change the time in increments of 10 minutes, press and hold either pad
When the power is first supplied to the oven or if there has been a power failure, the display will flash. Follow above instructions to set the clock. The clock time cannot be changed when the oven is set for a cook or timing operation. Cancel the operation to set the clock.
Press the CLOCK pad to recall the time of day when another function is displayed.
Timer
To set the timer:
1.Press the TIMER pad once. The words “Set Timer” will flash in the display.
2.Set the desired time using the ▲ and ▼ pads.
•Press either pad once to change the time by 1 minute (if the Timer is set for up to
1 hour), 5 minutes (if the Timer is set for over 1 hour), or 10 minutes (if the Timer is set for over 2 hours).
•Press and hold either pad to change the time in 5 minute or 10 minute increments, depending upon the time set in the display.
The TIMER can be set from 1 minute (0HR:01) up to 9 hours and 50 minutes (9 HR:50).
The timing operation will start automatically. Colons will flash in the display to indicate a timing operation. One long continuous beep will signal the end of the timing operation and “End” will briefly appear in the display. The time of day will automatically reappear in the display. The TIMER pad does not control the oven.
To cancel: Press and hold the TIMER pad for 3 seconds. The time of day will reappear after a slight delay.
PAGE 6