Merco Savory C-40 Individual Heater Element Replacement, Motor Replacement, 208V-21107 240V-21109

Page 4

6.Slide new heater unit into place and fasten with two screws.

7.Replace insulation.

8.Reconnect wiring harness (Refer to Wiring Diagram). Hold heater terminals with pliers. Be sure all connections are tight and jumper has been installed between upper heater unit connections.

EIndividual Heater Element Replacement:

Each heater unit is equipped with two elements.

These may be replaced individually as follows:

1.Remove heater unit as described in Section D.

2.Place unit on a flat surface and remove jumper and the two screws, nuts and retainers.

3.Bend holding tabs away from element and lift out at an angle that will let terminal ends clear holes.

4.When replacing elements, make certain that element with “raised bend” is on top and “flat” on bottom. There should be air space at points circled in (Figure #7). Elements must not touch at these points.

7

208V-21107

240V-21109

F Motor Replacement:

(Refer to Figure 8, 9 & 9A)

1.Remove right side panel.

2.Disconnect motor lead wire from terminal block and conveyor speed control (and or P.C. board if your unit contains one). Or on-off switch on C-40 only units.

3.Remove two mounting bolts from under toaster that attach motor bracket. Slip off drive chain.

4.Lift out motor and bracket assembly and remove four screws holding motor to bracket.

5.Using 1/16” Allen wrench, loosen Allen screws and remove clutch sprocket from motor shaft.

6.Mount clutch sprocket on new motor shaft and mount new motor on bracket.

7.Install motor and bracket assembly attaching with the two mounting bolts. Do not tighten bolts.

8.Mount drive chain on sprocket by sliding motor to the left then adjust chain by sliding motor to the right (Figure #8). Tighten bolts.

4

Image 4
Contents Parts & Service for C-40VS/C-40 Vertical Conveyor Toaster On/Off Switch Replacement Bun/Toast Switch Replace- mentThermostat Replacement Refer to Figure #3Heater Unit Assembly Re- placement Refer to Figure #5Individual Heater Element Replacement Motor Replacement208V-21107 240V-21109 Refer to , 9 & 9ADrive Chain Replacement Hubbed Sprocket ReplacementBearing Replacement Clutch Sprocket Replace- mentConveyor Chain Replace- ment Tension Assembly Replace- ment Transmission Assembly Re- placementRefer to Figure #11 Coupling Assembly Re- placement Refer to Figure #21 Wire Guard ReplacementRefer to Figure #22 Page Page North Hadley Road Fort Wayne, Technical Service Hotline

C-40 specifications

The Merco Savory C-40 is a state-of-the-art cooking and holding unit designed for commercial kitchens looking to elevate their food service operations. Engineered for versatility and efficiency, the C-40 integrates advanced technologies that cater specifically to the needs of busy kitchens, ensuring that meals are cooked and held at optimal quality for customers.

One of the main features of the Merco Savory C-40 is its advanced cooking system, which utilizes a combination of convection and direct heat to deliver superior cooking results. This dual method not only ensures even cooking but also enables chefs to achieve the perfect texture and flavor across a diverse range of menu items, from roasted meats to baked goods.

The C-40 boasts an impressive capacity, allowing operators to cook and hold multiple dishes simultaneously. Its expansive cooking chamber is designed to accommodate various pan sizes, making it perfect for high-demand environments. With the ability to cook large quantities at once, it streamlines kitchen operations and reduces overall cooking times.

In addition to its cooking capabilities, the Merco Savory C-40 features an innovative holding system that maintains optimal temperatures and humidity levels. This technology is ideal for keeping cooked foods at serving temperatures for extended periods without compromising quality. The precise temperature controls allow chefs to set the desired holding temperature, ensuring food remains fresh and ready to serve whenever needed.

Another key characteristic of the C-40 is its user-friendly interface. The digital controls provide instant access to cooking settings, timers, and temperature adjustments. This enhances operational efficiency and minimizes the learning curve for kitchen staff, making it easy for everyone to utilize the unit effectively.

Durability is also a hallmark of the Merco Savory C-40. Constructed from high-quality stainless steel, it is built to withstand the rigors of a commercial kitchen environment. The robust design ensures longevity while also simplifying cleaning and maintenance, vital for busy culinary operations.

Overall, the Merco Savory C-40 combines functionality, advanced technologies, and a focus on food quality, making it an essential addition for any professional kitchen aiming to enhance service and streamline their cooking processes. Its blend of innovative features and user-friendly design empowers chefs to deliver exceptional meals consistently, benefiting both the kitchen staff and the customers they serve.