Install Supply Cable to the Machine | Maytag MFS 25-35 guide

Supply cable of the machine must have copper wires. The cross section of the supply wires depends on the supply voltage and on the total electrical power input of the machine (see table 4.3). The supply cable safety device against a short-circuit fault and overloading must be performed by automatic breakers or fuses in the laundry switchboard. The recommended minimal cross-section of the supply wires as well as the values of fuses (F) for the supply are stated in table 4.5.

In all cases were the local standards requirements are higher, these has to be followed above the recommendation in table 4.5. If the local standards require installation of the earth leakage trip, we suggest to install one of 100 mA for the machines equipped with frequency inverter. The main contacts of the earth leakage trip must comply with the specified power input of the machine.

Power supply protection (A)

Recommended phase

conductor section

(mm2)

Protection conductor

section (mm2)

16	2,5	2,5
25 - 32	4	4

40	6	6

50	10	10

60 - 80	16	16

Tab 4.5.A. Recommended minimal conductor section

4.5.4. INSTALL SUPPLY CABLE TO THE MACHINE

! WARNING !

THE PROTECTIVE CONDUCTOR MUST BE LONGER SO THAT WHEN THE CABLE IS PULLED OUT ACCIDENTALLY, THIS CONDUCTOR IS DISCONNECTED AS THE LAST ONE!

Push the cable through the turnbuckle and connect the wires with the main switch. The diameter of the supply cable must between 11-17mm / 0.43-0.67“ for M25 turnbuckle and between 12-21mm / 0.47-0.83“ for M32 turnbuckle. Conductors of the supply cords shall not be consolidated by lead-tin soldering where they are subject to contact pressure, unless the clamping means is constructed so that there is no risk of a bad contact due to cold flow of the solder. The phase terminals are marked by L1, L2 and L3. A separate insulated terminal, labeled N, is provided for the neutral wire. Connect the protection earth wire directly to the protection earth terminal (marked PE) located on the rear bridge. Tighten the cap nut of the turnbuckle. By this way the rubber ring in the turnbuckle is pressed, thus securing the cable mechanically and against water. If there’s no main switch the terminals are marked in the same way so also the connection is the same. Depending on your supply voltage it is possible that L2 and L3 (1 AC) or N (3 AC without Neutral) must not be connected.

If the cable is attached from above, it is recommended to make a sagging on the cable in front of its entry into the cable turnbuckle. In this way an ingress of the running condensed water into the bush and/or machine can be avoided. The manufacturer recommends to attach the cable from beneath.

1. L1, L2, L3 and N terminal

2. Turnbuckle

3. Turnbuckle nut

4. PE terminal

Fig. 4.5.B. Example of supply cable connection

100646 PUBLICATION DATE Sep 05

INSTALLATION AND MAINTENANCE MANUAL

MFS 25-35 specifications

The Maytag MFS 25-35 is a refrigerator that exemplifies innovation, combining advanced features and technologies designed to enhance user experience and promote energy efficiency. This model is tailored for homeowners seeking reliability and style, making it a popular choice in modern kitchens.

One of the standout features of the Maytag MFS 25-35 is its spacious capacity, offering ample room for groceries and perishable items. With adjustable shelves and door bins, users can efficiently organize their food items according to their preferences, maximizing space and convenience. The refrigerator's layout minimizes clutter and helps keep everything within easy reach.

The MFS 25-35 is equipped with the latest cooling technology, including a powerful compressor that ensures consistent temperatures throughout the refrigerator and freezer sections. This feature is critical for preserving the freshness of food and preventing spoilage. Additionally, it employs a frost-free defrost system, eliminating the need for manual defrosting and providing hassle-free maintenance.

Energy efficiency is another hallmark of the Maytag MFS 25-35, as it is designed with environmentally friendly features that reduce energy consumption. The ENERGY STAR certification assures users that the unit meets stringent energy efficiency guidelines, which can lead to lower utility bills and a reduced carbon footprint.

For added convenience, the Maytag MFS 25-35 offers features like an ice maker and water dispenser, allowing users to enjoy cold beverages and ice without the hassle of manual filling. The dispenser is conveniently located on the front, providing quick access and minimizing the need to open the refrigerator door, helping to maintain the internal temperature.

The design of the MFS 25-35 reflects modern aesthetics, with sleek stainless steel finishes that complement various kitchen decors. Its intuitive controls and display make it easy to adjust settings and monitor performance.

Overall, the Maytag MFS 25-35 brings together practicality, efficiency, and style. Its combination of innovative technologies and thoughtful design makes it an outstanding choice for anyone looking to upgrade their kitchen appliances. With this refrigerator, users can expect a reliable and enjoyable experience for years to come.