Maytag MFS 25-35 manual Replacement of Door Rubber, Adjusting of Vibration Switch

Page 22

REPLACEMENT OF DOOR RUBBER

MACHINES 6kg / 13lb, 7kg / 16lb, 10kg / 22lb

1.Open the door. Remove the door glass (Fig. 5.2.A, pos.3) with rubber (pos.2) from the stainless steel door (pos.5) by pushing it towards the drum. Do it carefully, do not damage the glass.

2.Remove the seal (pos.4) from the glass.

3.Place a new rubber seal with wider groove on the glass with the edge up.

4.Moisten the seal groove (pos.2) for door with soap water. Place a smooth cord in the groove all around. Tighten up the margin by cord and fit the unit to the door opening (pos.5) (with the clip up). Hold one end of the cord firmly on the door. Pull the other cord end towards the center of the glass for the rubber edge properly fit in.

ADJUSTING OF VIBRATION SWITCH

!WARNING!

MAKE SURE THE MACHINE IS DISCONNECTED FROM POWER SUPPLY BY PULLING OUT THE PLUG!

The vibration switch is an important safety element which must - if correctly adjusted - stop the machine if excessive vibrations and shaking occur due to an unbalance caused by improper distribution of linen in the washing drum. It is recommended that at the first installation and then once in a year a qualified worker verifies the vibration switch, fig. 5.2.C.

5.Dismantle (6kg / 13lb, 7kg / 16lb, 10kg / 22lb) the top cover by two bolts on machine rear for machines. For the 16kg / 36lb the top cover can be folded open and supported by the support at the right side panel.

6.Check the distance between microswitch (pos 1) and the limiter (pos 2).

7.The distance between the microswitch and the spring holder must be 0,2mm / 0.008“.

8.Check the position and condition of the sensor (pos.3) in the limiter (pos 2).

It must be exactly in the center of the hole! Unscrew the tiltswitch plate and move the plate up, down, left and right to adjust the center of the sensor to the center of the hole on the limiter.

9.At the first installation and then once in a year the vibration switch has to be tested on his functionality. After starting the extraction mode and after reaching the maximum RPM, carefully switch over the vibration switch by moving the flexible sensor manually. The machine will stop extracting and will return to 0 RPM.

!WARNING!

DO NOT OPERATE THE MACHINE IF THIS FUNCTION DOESN’T WORK ANYMORE!

DO THIS CAREFULLY TO AVOID INJURIES BY VIBRATING AND FIRM PARTS OF THE MACHINE! AFTER YOU HAVE CHECKED THE FUNCTION, MOUNT THE MACHINE COVER BACK!

1. Microswitch

2. Limiter

3. Sensor

Fig. 5.2.C. Vibration switch

100646 PUBLICATION DATE Sep 05

INSTALLATION AND MAINTENANCE MANUAL

21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Installation and Maintenance Manual MFSTable of Contents Publication Date Sep 05 Dimensions Machine Dimensions Technical InformationWashing Functions 6kg / 13lb, 7kg / 16lb, 10kg / 22lb 6kg / 13lb 7kg / 16lb 10kg / 22lb 16kg / 36lb Machine Storage Machine InstallationMachine Inspection Machine PositioningFreely on the Floor Freely on AN ElevationFixed on AN Elevation 3.A On an elevationShipping Bars Leveling the MachineTransporting braces Electrical Connection 4.5.1. General Supply Cable and Safety DevicesEmergency Stop Device Install Supply Cable to the Machine B. Example of supply cable connectionChecking Rotation Direction Multiple Machines in Line Simple PhaseConnection of Water Supplies Water ConnectionSteam Connection Water ConsumptionWater Drain Connection A. Design of the waste channel Connection of Liquid Washing Soaps Dosing AIR Vent ConnectionChecking Before Putting Into Service Preparing the Machine for OperationChecking and Maintenance Daily Maintenance and AdjustmentsMaintenance Checking and Maintenance Every SIX MonthsAdjustments and PART´S Exchanges Adjustment of Door Seal ThrustReplacement of Door Rubber Adjusting of Vibration SwitchReplacement / Regulation of the Belt D. Regulation of beltTightening Moments Water FiltersFuses Error Handling Troubleshooting AidsProblem Check List Problem Door Fails to Open List of Recommended Spare Parts Machine Liquidation Putting the Machine OUT of ServiceDisconnecting the Machine RemarksMachine Type Programmer

MFS 25-35 specifications

The Maytag MFS 25-35 is a refrigerator that exemplifies innovation, combining advanced features and technologies designed to enhance user experience and promote energy efficiency. This model is tailored for homeowners seeking reliability and style, making it a popular choice in modern kitchens.

One of the standout features of the Maytag MFS 25-35 is its spacious capacity, offering ample room for groceries and perishable items. With adjustable shelves and door bins, users can efficiently organize their food items according to their preferences, maximizing space and convenience. The refrigerator's layout minimizes clutter and helps keep everything within easy reach.

The MFS 25-35 is equipped with the latest cooling technology, including a powerful compressor that ensures consistent temperatures throughout the refrigerator and freezer sections. This feature is critical for preserving the freshness of food and preventing spoilage. Additionally, it employs a frost-free defrost system, eliminating the need for manual defrosting and providing hassle-free maintenance.

Energy efficiency is another hallmark of the Maytag MFS 25-35, as it is designed with environmentally friendly features that reduce energy consumption. The ENERGY STAR certification assures users that the unit meets stringent energy efficiency guidelines, which can lead to lower utility bills and a reduced carbon footprint.

For added convenience, the Maytag MFS 25-35 offers features like an ice maker and water dispenser, allowing users to enjoy cold beverages and ice without the hassle of manual filling. The dispenser is conveniently located on the front, providing quick access and minimizing the need to open the refrigerator door, helping to maintain the internal temperature.

The design of the MFS 25-35 reflects modern aesthetics, with sleek stainless steel finishes that complement various kitchen decors. Its intuitive controls and display make it easy to adjust settings and monitor performance.

Overall, the Maytag MFS 25-35 brings together practicality, efficiency, and style. Its combination of innovative technologies and thoughtful design makes it an outstanding choice for anyone looking to upgrade their kitchen appliances. With this refrigerator, users can expect a reliable and enjoyable experience for years to come.
Top Page Image Contents