Maytag 860S manual Spray arms, Door, Tip

Page 22

If you still cannot start the machine and a humming noise can be heard, then the overfilling protection has been activated.

Shutoff the water

Remove the plug from the wall socket

Call Service

CAUTION!

Do not forget to replace the adapting piece.

Spray arms

The holes and bearings can occasionally become clogged.

1.Pull the lower spray arm straight up to release it.

2.Scrape away the debris with a needle or similar. The spray arms also have holes on the underside.

To release the upper spray arm, the upper basket must be removed.

3.Pull out the basket and turn the basket stop outwards on both rails (see picture). The basket can now be removed.

4.Remove the upper spray arm in the same way as the lower arm and clean it.

Door

When cleaning the edge around the door, use only a slightly damp cloth, possibly with a little detergent. Do not use a spray bottle or similar around the door catch. This is to ensure that water does not penetrate into the door catch and come into contact with the electrical components.

CAUTION!

Do not use a spray bottle or similar around the door catch.

Tip!

In order to prevent bad odours in the dishwasher, clean the strips and corners with a dish brush and low-lather detergent.

22

Image 22
Contents Maytag MSE 860 Fars Dispensing dishwasher detergent Quick GuideLoading baskets Close the door Mini Program GuideContents Search words Salt Setting water hardnessRinse aid Performance informationBefore doing your first wash Safety Child-safe button lock Child SafetyAdvice Child-safe dishwashingParts of the dishwasher Technical informationBaskets Control panel DispenserBasic Course Load the baskets correctlyPress the main switch and select programme Select options TemperatureOptions DryingEco-dishwashing Specialsettings Changing options If the machine is switched off with the main switchPress Start/Stop and close the door Do you want to load more dishes?Fragile dishes Standard program Tested program 55˚C 50˚C 30˚C Display Fine filter CleaningCoarse filter Drainage pumpDoor Spray armsTip Pour in rinse aid Machines with refill indicatorRinse aid Select dosageSalt Indicator is not workingApplies to dishwashers with water softeners Pour in salt Fault indications Display Type of fault ActionDishes are not clean Stains or a film on the china TroubleshootingProblems Possible causesProblems Machine Problems Possible causes ActionWater remains Bad odour in the machine Dishes are not sufficiently dryEnergy labelling Performance informationTest dosage Example of dishwasher loadingInstallation Suggestions on positioning the dishwasherConnection to electricity Technical dataConnection to water Connection to drainageAdjusting machines with adjustable foot Adjusting machines with six feet freestanding dishwasherAdjusting machines with three or four feet Positioning the machineFitting fixed kick-plate Fitting strip seal Adjusting the plinthScrew the dishwasher into place Setting water hardness Setting water hardness machines with water softenerService Service & guaranteeGuarantee Own comments Own comments Own comments Search words