Extron electronic DVC501SD Video output, Sync, Audio input, Audio output, Control/remote

Page 33

Video output

Number/signal type

1 single link DVI-D

 

1 RGB, YUV / YPbPr

Connectors

1 female DVI-I

 

1 female 15-pin HD

Nominal level

 

TMDS

1.0 Vp-p swing

Analog

1 Vp-p for Y of component video

 

0.7 Vp-p for RGB and for R-Y and B-Y of component video

Impedance

 

TMDS

100 ohms

RGB

75 ohms

Return loss

<-25 dB @ 100 MHz

DC offset

±5 mV with input at 0 offset

Sync

Output type

RGBHV, RGBS, RGsB, component video (bi-level or tri-level)

Output level

5.0

Vp-p for RGB

 

0.6

Vp-p for component video tri-level sync

 

0.3

Vp-p for component video bi-level sync

Output impedance

75 ohms

Output polarity

Positive or negative (selectable)

Audio

Frequency response

20 Hz to 20 kHz, ±0.2 dB

THD + Noise

0.05% @ 1 kHz at nominal level, 0 dB gain

S/N

>100 dB at maximum output (unweighted)

Stereo channel separation

>80 dB @ 1 kHz

Audio input

Number/signal type

1 SDI embedded audio (SMPTE 272M, SMPTE 299M)

Connector

1 female BNC

Adjustment range

-18 dB to 0 dB

Audio output

Number/signal type

1 stereo, balanced/unbalanced

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1 dB channel to channel

Maximum level (Hi-Z)

+21 dBu, balanced, or +15 dBu, unbalanced, at 0.05% THD+N

Control/remote

Serial control port

1 RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles)

Baud rate and protocol

9600 baud, 8 data bits, 1 stop bit, no parity

Serial control pin configuration

3 = Tx, 4 = Rx, 5 = GND

USB control ports

1 front panel female mini USB type B

USB standards

USB 2.0, low speed

Program control

Extron Simple Instruction Set (SIS)

DVC 501 SD • Reference Information 27

Image 33
Contents DVC 501 SD User GuideSafety Instructions English FCC Class a Notice Conventions Used in this Guide Contents DVC 501 SD Contents Introduction FeaturesAbout this Guide About the DVC 501 SD ConverterExtron DVC 501 SD Application DiagramInstallation Overview InstallationRear Panel Pin SignalConnecting to the RS-232 Port Connecting for Remote ControlConnecting to the RS-232 Port Connecting to the USB Config PortFound New Hardware Wizard Opening Screen DVC 501 SD Installation Front Panel OperationPowering On Default CycleDefault Cycle Special Conditions Using the menus Menus on the LCD ScreenMenu System Overview Main Menu Flow Diagram Menu flow diagramResolutions and refresh rates Output Configuration MenuFormat submenu Sync Polarity submenuAudio Mute submenu Audio Config MenuGain/Atten submenu Decode Audio on Pair N submenuTest Pattern submenu Advanced Config MenuResetting Exiting the Menu SystemInt. Temp. screen Updating Firmware Front Panel Lockout Executive ModeDevice Name Drop-down Menu on the Add Device Window Firmware Loader Window with a DVC 501 SD Device Added Firmware Upload in Progress Using SIS Commands Remote Configuration ControlCommunication Ports DVC-initiated MessagesUsing the Command and Response Table Error ResponsesPAL Symbol DefinitionsOutput Configuration Command and Response Table$ Test Reference Information SpecificationsVideo Video input and loop throughSync Video outputAudio Audio inputMtbf GeneralOptional Accessories Part Numbers and AccessoriesMounting the DVC 501 SD Converter Included PartsUnder-desk Mounting Rack mounting procedureThrough-desk Mounting the DVC 501 SD Through-desk MountingExtron Warranty

DVC501SD specifications

The Extron Electronic DVC501SD is a sophisticated device designed for video scaling and conversion, catering to various audiovisual applications. This versatile tool is particularly valuable for professional environments where high-quality video output is essential. The DVC501SD stands out through its array of features, advanced technologies, and user-friendly characteristics, making it an excellent choice for broadcasting, videoconferencing, and other multimedia usage.

One of the main features of the DVC501SD is its ability to convert and scale video signals from multiple sources. It supports a wide range of resolutions, ensuring compatibility with various video formats. The device features a built-in upscaler that can handle 4:3 and 16:9 aspect ratios, allowing users to optimize video quality based on their display needs. This capability is crucial for presentations or events where clarity and detail are paramount.

The DVC501SD utilizes Extron’s proprietary video processing technologies, ensuring that color accuracy and video integrity are maintained throughout the signal conversion process. This technology includes advanced filtering and dynamic range control, which enhances overall video performance. The device can deliver high-quality outputs with low latency, making it ideal for live streaming and real-time video applications.

Another notable characteristic is its straightforward user interface. The DVC501SD features an intuitive front panel with easily accessible buttons for quick adjustments. Additionally, it includes an LCD display that provides essential information about input sources and output resolutions, ensuring users can manage settings conveniently.

The DVC501SD is also equipped with various input and output options, including HDMI, Composite, and S-Video, providing flexibility in connecting different devices. The robust build quality ensures that it can withstand the rigors of professional use, making it a reliable choice for any AV setup.

The device supports both analog and digital audio, allowing for a seamless integration of sound with video. This is especially important in environments where audio-visual synchronization enhances the overall experience.

With its blend of functionality, ease of use, and adaptability, the Extron Electronic DVC501SD stands out as a top choice in the realm of video scaling and conversion. Whether for corporate presentations, educational settings, or live events, it delivers exceptional performance, making it a valuable asset for any professional AV solution.