Extron electronic DVC501SD manual Under-desk Mounting, Rack mounting procedure

Page 36

Rack mounting procedure

To rack mount the converter, you can use one of the Extron 19 inch rack shelf mounting options (see “Optional Accessories,” earlier in this section, for part numbers).

Half-rack

false front panel uses 2 front holes.

DIGITAL

C

501

 

DV

SD

VIDEO

 

CONVERTE

 

 

R

(2)4-40 x 3/16" screws Use 2 mounting holes on opposite corners.

Figure 27. Rack Mounting the DVC 501 SD

1.If rubber feet have been installed on the bottom of the unit, remove them.

2.Mount the DVC on the rack shelf using two 4-40 x 3/16 inch screws in opposite

(diagonal) corners to secure the unit to the shelf.

3.(Optional) Attach a blank panel or other unit to the rack shelf.

4.Insert the shelf into the rack, aligning the holes in the shelf with those in the rack.

5.Secure the shelf to the rack using the supplied machine screws. This shelf can be mounted in the front or in the rear of the rack.

Under-desk Mounting

The DVC 501 SD can also be mounted under furniture, such as a table or podium surface, using the optional MBU 125 under-desk mounting kit (see “Optional Accessories” for the part number).

1.If rubber feet were previously installed on the bottom of the unit, remove them.

2.Attach the mounting brackets to the unit with the included machine screws.

3. Insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting surface until slightly less than 1/4 inch of the screw protrudes.

4. Align the mounting screws with the slots in the brackets, and place the converter against the surface with the screws through the bracket slots.

5.Slide the unit slightly forward or back, then tighten all four screws to secure it in place.

DVC 501 SD • Reference Information 30

Image 36
Contents User Guide DVC 501 SDSafety Instructions English FCC Class a Notice Conventions Used in this Guide Contents DVC 501 SD Contents Features IntroductionAbout this Guide About the DVC 501 SD ConverterApplication Diagram Extron DVC 501 SDInstallation Installation OverviewPin Signal Rear PanelConnecting for Remote Control Connecting to the RS-232 PortConnecting to the USB Config Port Connecting to the RS-232 PortFound New Hardware Wizard Opening Screen DVC 501 SD Installation Operation Front PanelPowering On Default CycleDefault Cycle Special Conditions Using the menus Menus on the LCD ScreenMenu System Overview Menu flow diagram Main Menu Flow DiagramOutput Configuration Menu Resolutions and refresh ratesFormat submenu Sync Polarity submenuAudio Config Menu Audio Mute submenuGain/Atten submenu Decode Audio on Pair N submenuAdvanced Config Menu Test Pattern submenuResetting Exiting the Menu SystemInt. Temp. screen Front Panel Lockout Executive Mode Updating FirmwareDevice Name Drop-down Menu on the Add Device Window Firmware Loader Window with a DVC 501 SD Device Added Firmware Upload in Progress Remote Configuration Control Using SIS CommandsCommunication Ports DVC-initiated MessagesError Responses Using the Command and Response TableSymbol Definitions PALCommand and Response Table Output Configuration$ Test Specifications Reference InformationVideo Video input and loop throughVideo output SyncAudio Audio inputGeneral MtbfPart Numbers and Accessories Optional AccessoriesMounting the DVC 501 SD Converter Included PartsRack mounting procedure Under-desk MountingThrough-desk Mounting Through-desk Mounting the DVC 501 SDExtron Warranty

DVC501SD specifications

The Extron Electronic DVC501SD is a sophisticated device designed for video scaling and conversion, catering to various audiovisual applications. This versatile tool is particularly valuable for professional environments where high-quality video output is essential. The DVC501SD stands out through its array of features, advanced technologies, and user-friendly characteristics, making it an excellent choice for broadcasting, videoconferencing, and other multimedia usage.

One of the main features of the DVC501SD is its ability to convert and scale video signals from multiple sources. It supports a wide range of resolutions, ensuring compatibility with various video formats. The device features a built-in upscaler that can handle 4:3 and 16:9 aspect ratios, allowing users to optimize video quality based on their display needs. This capability is crucial for presentations or events where clarity and detail are paramount.

The DVC501SD utilizes Extron’s proprietary video processing technologies, ensuring that color accuracy and video integrity are maintained throughout the signal conversion process. This technology includes advanced filtering and dynamic range control, which enhances overall video performance. The device can deliver high-quality outputs with low latency, making it ideal for live streaming and real-time video applications.

Another notable characteristic is its straightforward user interface. The DVC501SD features an intuitive front panel with easily accessible buttons for quick adjustments. Additionally, it includes an LCD display that provides essential information about input sources and output resolutions, ensuring users can manage settings conveniently.

The DVC501SD is also equipped with various input and output options, including HDMI, Composite, and S-Video, providing flexibility in connecting different devices. The robust build quality ensures that it can withstand the rigors of professional use, making it a reliable choice for any AV setup.

The device supports both analog and digital audio, allowing for a seamless integration of sound with video. This is especially important in environments where audio-visual synchronization enhances the overall experience.

With its blend of functionality, ease of use, and adaptability, the Extron Electronic DVC501SD stands out as a top choice in the realm of video scaling and conversion. Whether for corporate presentations, educational settings, or live events, it delivers exceptional performance, making it a valuable asset for any professional AV solution.