Extron electronic USP 405 manual Output Configuration, Input #2 submenu, Input Phase submenu

Page 30

Installation and Operation, cont’d

Input #2 submenu

Rotate the horizontal Adjust () knob while in the Input #2 submenu to select the appropriate video format (RGB, RGBcvS, YUVi, YUVp, Betacam 50, Betacam 60, HDTV, S-video, composite video) for input 2. The default for input 2 is Betacam 50.

Input Phase submenu

For RGB (input 1 and 2), HDTV, and YUVp (input 2) input sources, the pixel phase adjustment feature is used to eliminate unwanted noise by setting the sampling rate of the input source. See the following note. Rotate the horizontal Adjust () or vertical Adjust () knob to adjust the pixel phase from 0 to 31. The default setting is 16.

Pixel phase is the timing of the USP 405’s sampling rate. Sampling at the optimum pixel phase results in less noise and a brighter scaled output.

Output Configuration

The following flowchart provides an overview of the Output Configuration submenus and the options for each setting.

Input

Configuration

MENU

Output

NEXT

Resol 1024 x 768

 

NEXT

 

 

Output Signal

 

NEXT

 

 

Sync Polarity

Configuration

Refresh @ 60

 

 

 

 

RGB

 

 

 

H Neg

V Neg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NEXT

Scaler output rates

•See the table below for available combinations of resolutions and refresh rates.

Default: 640x480, 60 Hz

NOTE Lock = Accu-RATE Frame Lock™

Video types

Polarity combinations

•

RGB (default)

•

H-/V- (default)

•

H+/V-

•

Y, R-Y, B-Y

•

H-/V+

•

H+/V+

Resolution and refresh rates submenu

The output resolution is defined for each input. Rotate the horizontal Adjust () knob while in this submenu to select one of the combinations of output resolutions and refresh (vertical scanning) rates.

Rotate the vertical Adjust () knob while in this submenu to select one of the available refresh rates. Selecting Lock enables the Extron Accu-RATE Frame Lock™ (AFL™) feature. Accu-RATE Frame Lock eliminates image tearing and other artifacts of scaling motion video by eliminating frame rate conversion. It exactly matches the output rate of the USP 405’s scaler to the frame rate of the input. Select this feature if you will be using motion video sources with a display that is capable of a variety of refresh rates.

2-14 USP 405 • Installation and Operation

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Universal Signal Processor USPSicherheitsanleitungen Deutsch Safety Instructions EnglishConsignes de Sécurité Français Instrucciones de seguridad EspañolRear panel video inputs N Rear panel video outputsUSP 405 Quick Start QS-1 Input menu Default Cycle menuMain menu QS-2 USP 405 Quick StartOutput menu Memory Presets menuAdvanced Configuration menu USP 405 Quick Start QS-3Genlock menu Picture Adjustments menuExecutive Mode menu Exit menuStep USP 405 Quick Start QS-5Replaced with a detail sharpness adjustment QS-6 USP 405 Quick StartTable of Contents Table of Contents, cont’d Serial Digital Interface SDI Card Installation USP 405 Table of Contents IiiIv USP 405 Table of Contents One Features and Options About this ManualAbout the USP Six video outputs Options and accessories Introduction, cont’dInstallation and Operation Tabletop use Application diagramsMounting the Scaler Rack mountingExample of the USP 405 being used as a scan converter Example of the USP 405 being used as a scalerUSP 405 rear panel connectors Rear Panel FeaturesPower connection Video input and output connectionsConnectors 14 and 15 output the same signal simultaneously Front Panel Features Genlock connectionsRS-232 connection Picture adjustment buttons Input selection buttonsUSP 405 front panel Genlock and Vertical Interval Switching Genlock setupLCD menu display and controls Timing Source Oscilloscope displays Superimposed waveformsVectorscope screen during color subcarrier phase adjustment Setting up a DVD sourceVectorscope screen during horizontal phase adjustment Optimizing the SystemDefault menus Menus, Configuration, and AdjustmentsMoving through menus by using front panel controls Menu overviewInput Configuration Main menusResolution and refresh rates submenu Output ConfigurationInput Phase submenu Input #2 submenuMemory Presets Erase memory presets submenu Recalling a presetEdge Smoothing submenu Advanced ConfigurationBlue Mode submenu Encoder Filter submenuGenlock menu Image Adjustments Exit menuFront Panel Security Lockout Executive mode Adjust knobs have no mechanical limits to their rotationSelecting an input IR 801 Infrared Remote ControlAspect ratio presets Freezing an inputImage adjustments TroubleshootingAdjusting image size Horizontal and vertical filteringOperating problems Problem Cause SolutionInstallation and Operation, cont’d Three Error responses Host-to-signal processor communicationsSignal processor-initiated messages RS-232 Programmer’s GuideUsing the command/response tables Symbol definitionsAscii to Hex conversion table Command Ascii Command Response Additional description Serial Communication, cont’dFreeze Pixel phase Command/response table for special function SIS commands Command Ascii Command Response ValuesInstalling the software Using the control programControl Software for Windows Using the software Using the help programInstalling the software Labeling Buttons on the USPInstalling labels in the USP 405’s buttons Button label screenSetting the Output Rate Using the Per Input Feature VCRSerial Communication, cont’d AAppendix Specifications USP 405 AppendixSync Accessories Part number Part Numbers and AccessoriesAccessories Included partsFirmware Upgrade Installation Removing the USP 405 coverU24 U60 U68U67 Locating the four firmware IC chipsSerial Digital Interface SDI Card Installation Both SDI cards installedSDI output card circuit board connector SDI input card standoffInput SDI board installation Output SDI board installationInstalled SDI input card Installed SDI output cardFCC Class a Notice Extron’s Warranty Extron Electronics, USA
Related manuals
Manual 3 pages 46.42 Kb

USP 405 specifications

The Extron Electronics USP 405 is a versatile and high-performance solution designed specifically for managing audio and video signals in varied settings, including classrooms, conference rooms, and other collaboration spaces. This compact device excels in providing seamless connectivity, enhanced audio, and video quality, making it an essential component for modern AV system integration.

One of the key features of the USP 405 is its ability to support multiple input formats. With a blend of HDMI, DisplayPort, and analog video inputs, it offers unmatched flexibility for connecting various devices such as laptops, tablets, and other multimedia equipment. This ensures users can easily share content without worrying about compatibility issues.

Equipped with advanced signal processing technologies, the USP 405 enhances both video and audio performance. The device includes sophisticated scaling capabilities that automatically adjust the resolution of the video output to match the display device specifications, ensuring optimal viewing experiences. Additionally, the built-in audio embedding and de-embedding features allow for seamless integration of audio sources, enhancing clarity and reducing wiring complexity.

Another standout characteristic of the USP 405 is its intuitive user interface. The front panel features clearly labeled controls for easy operation, while the device can also be controlled via network protocols. This means it can be integrated into existing control systems and managed remotely, streamlining AV operations.

The USP 405 also incorporates Extron's renowned signal integrity technologies, which help maintain high-quality signal transmission over long distances. This ensures that audio and video remain clear and reliable, even in larger setups where cable runs can be extensive.

Durability and reliability are crucial in any AV setup, and the USP 405 is built to withstand the rigors of daily use. Its robust design and fanless architecture reduce potential points of failure while ensuring quiet operation, making it an ideal choice for noise-sensitive environments.

In conclusion, the Extron USP 405 provides a comprehensive suite of features aimed at enhancing AV performance and integration. With its multiple input types, advanced signal processing, user-friendly control options, and durable design, it stands out as a powerful tool for any modern AV installation. Whether in educational settings, corporate environments, or entertainment venues, the USP 405 helps create engaging and productive audiovisual experiences.
Top Page Image Contents