Extron electronic RGB 203 RXI Configuring Edid Edid Minder Model Only, User-Recorded Edid

Page 3

RGB 203 Rxi • Setup Guide (Continued)

Configuring EDID (EDID Minder Model Only)

The Extron EDID Minder ensures the resolution of the video source signals are compatible with the display devices. The RGB 203 Rxi provides 14 factory-installed EDID values that can be used. By default, the EDID value is set to a resolution of 1024x768, which will allow most source devices to boot up and provide a signal that can be displayed. Alternatively, you can record your own EDID information and use those values, or use EDID information from a monitor connected to the Local Monitor output.

User-Recorded EDID

You may also record EDID information from a specific monitor as follows:

1.Connect a display to the Local Monitor output (C) and power on the monitor and interface.

2.Turn the EDID Select dial (O) to setting 0.

3.Press and release the recessed Record button (M). The LED light will flash red slowly three times while the EDID is recorded and return to green when recording is complete.

NOTE: This EDID will be stored in memory until deleted or overwritten.

Using Recorded EDID Values

NOTE: To boot up correctly, the source device must be able to receive EDID information during the boot process.

Therefore, the interface (and the local monitor, if using pass-through EDID) must be switched on before the source is switched on.

Use factory-installed EDID information or the user-recorded EDID as follows:

1.If you have not already done so, connect the RGB 203 Rxi to the source device. Do not switch on the source device at this time.

2.Set the left front panel DIP switch (N) to the required frequency (50 or 60 Hz).

3.Set the rotary switch to the required value (see the table below). Settings 1 - E are factory installed. Setting 0 is for

user‑recorded and can only be used if a value has been stored at that location (see the previous section, "User-Recorded EDID").

Rotary Switch

Resolution

Position

 

0User-recorded EDID

1800x600

21024x768 (default)

31280x720

41280x768

51280x800

61280x1024

71360x768

81366x768

91400x1050

A1440x900

B1600x1200

C1680x1050

D1920x1080

E1920x1200

FLocal monitor pass-through

4.Power on the display device.

5.Power on the source device.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Internal Configuration MountingRear Panel Connections Rear Panel DIP Switch Configuration Switch EffectFront Panel Connections User-Recorded Edid Configuring Edid Edid Minder Model OnlyUsing Recorded Edid Values Rotary Switch Resolution PositionTroubleshooting OperationLocal Monitor Pass-through Edid
Related manuals
Manual 2 pages 12.24 Kb

RGB 203 RXI specifications

The Extron RGB 203 RXI is an advanced audio-video distribution amplifier designed for high-performance signal processing and routing in professional environments. Known for its robust capabilities, the RGB 203 RXI is engineered to manage RGBHV signals and ensure optimal image quality across multiple displays.

One of the main features of the RGB 203 RXI is its ability to support resolutions up to 1920x1200, enabling the transmission of high-definition video signals with impressive clarity and detail. This makes it particularly suitable for applications in educational institutions, corporate settings, and broadcast studios, where high-quality visuals are crucial.

The RGB 203 RXI incorporates Extron's exclusive technologies to enhance performance. The built-in image EQ ensures consistent picture quality by compensating for signal degradation, especially over long cable runs. This feature is essential when maintaining signal integrity across multiple outputs, ensuring that each connected display receives the same high-quality image.

Another notable characteristic of the RGB 203 RXI is its multiple output capability, allowing users to split a single input signal into multiple RGBHV outputs. It offers eight outputs, which can be very beneficial in setups requiring simultaneous connections to multiple displays without sacrificing performance.

Additionally, the device features comprehensive control options, including front panel buttons, RS-232 control, and Ethernet connectivity. This versatility allows operators to easily switch inputs and adjust settings remotely, making it ideal for integrated control systems.

The RGB 203 RXI also supports hot-swappable connectors, which enable easy and efficient replacements of cables without interrupting the workflow. This feature is particularly valuable in dynamic environments where equipment is frequently rearranged.

In terms of build quality, the RGB 203 RXI features a compact and rack-mountable design, making it suitable for both fixed installations and portable applications. Its durable construction ensures reliability in demanding situations.

In summary, the Extron RGB 203 RXI is a powerful and adaptable distribution amplifier that offers high performance, advanced features, and excellent flexibility for professional AV environments. With its robust connectivity options and superior image processing capabilities, it stands out as an essential tool for achieving outstanding visual presentations.
Top Page Image Contents