setting up your microwave oven
Be sure to follow these instructions closely so that your new microwave oven works properly.
CHECKING THE PARTS
Carefully unpack your microwave oven, and make sure you’ve received all the parts shown below. If your microwave oven was damaged during shipping, or if you do not have all the parts, contact Samsung Customer Service. (Refer to the “Warranty and service information” on page 8.)
Microwave oven (SMH1927)
* Shelf | * Glass Tray | * Roller Guide |
|
| Ring |
* Grease filter | * Charcoal filter* Exhaust adaptor | |
(Installed) |
|
|
* Hardware kit | Manuals | Templates |
(Screws & | (User & | (Top & Wall) |
Brackets) | Installation) |
|
If you need an accessory marked with a *, you can buy it from the Samsung Contact Center
8_ setting up your new microwave oven
SMH1927_XAA_EN.indd 8
WARRANTY AND SERVICE
INFORMATION
To help us to serve you better, please complete the enclosed registration card and promptly return it by mail. If the registration card is missing, you can call Samsung Electronics, Inc., at
When contacting Samsung, please provide the specific model and serial number information which is usually located on the back or bottom of the product. Please record these numbers in the spaces provided below, along with the other requested information. Keep this information in a safe place as a permanent record of your purchase to aid in identification in case of theft or loss. Also keep a copy of your sales receipt as a proof of purchase if warranty service is needed.
MODEL NUMBER
SERIAL NUMBER
DATE PURCHASED
PURCHASED FROM
Warranty service can only be performed by a Samsung Authorized Service Center. If you should require warranty service, provide the above information with a copy of your sales receipt to the Samsung Authorized Service Center. For service assistance and the location of the nearest service center, please call
SETTING UP YOUR MICROWAVE OVEN
1.Open the door by pulling the handle on the right side of the door.
2.Wipe the inside of the oven with a damp cloth.
3.Install the
4.Place the glass tray securely in the center of the pre- assembled roller ring.