Bunn VP17A Thermal CUT-OFFS, Install new thermal cut-off Refer to when reconnecting wires

Page 13

SERVICE (cont.)

THERMAL CUT-OFFS

Removal and Replacement:

1.Disconnect the thermal cut-off from the terminal on the black lead from ready light harness and the black lead from the control thermostat or the tank heater terminal and the red lead from the main harness.

2.Remove the white lead from the tank "keep warm" heater from the thermal cut-off terminal.

3.Install new thermal cut-off.

4.Refer to Fig. 9 when reconnecting wires.

P1262

FIG. 8 THERMAL CUT-OFFS

Location:

The thermal cut-offs are located inside the hood connected to the tank heater terminals.

BLK Lead

Thermal Cut-Off

RED Lead from

Main Harness

WHI from "Keep Warm"

Heater

BLK Lead from Control Thermostat

Thermal Cut-Off

BLK Lead from

Ready Light

Harness

Tank Heater Terminals

Test Procedures:

1.Disconnect the brewer from the power source.

2.Disconnect the thermal cut-off from the terminal on the black lead of the ready light wiring harness.

3.With an ohmmeter, check for continuity across the thermal cut-off terminals.

If continuity is present as described, the thermal cut- off is operating properly.

If continuity is not present as described, replace the thermal cut-off.

4.Disconnect the thermal cut-off from the tank heater termnal and the red lead from the main wiring harness.

5.Check for continuity across the thermal cut-off terminals.

If continuity is present as described, the thermal cut- off is operating properly.

If continuity is not present as described, replace the thermal cut-off.

FIG.9 THERMAL CUT-OFF TERMINALS

P1389

Page 13

10860.1 071598

Page 12 Page 14
Image 13
Page 12 Page 14
Contents VP17A Introduction WarrantyUser Notices #00831.0000 Initial SET-UP Electrical RequirementsCoffee Brewing Electrical HOOK-UPCleaning Problem Probable Cause TroubleshootingSyphon System Penser Lime Build-upSerious leaks Spitting or excessive steaming Lime Build-upBeverage overflows dispenser Filter TypeProbable Cause Remedy ProblemComponent Access ServiceControl Thermostat Test Procedures Disconnect the brewer from the power sourceLocation ON/OFF Warmer Switch ON/OFF Warmer SwitchLid Disconnect the brewer from the power source Install sprayhead Secured to the tank lidWires Nals If continuity is present as described, reconnect SemblyThermal CUT-OFFS Install new thermal cut-off Refer to when reconnecting wiresWarmer Elements 10860.1 10860.1 10860.1
Related manuals
Manual 17 pages 49.61 Kb

VP17A specifications

The Bunn VP17A is a commercial-grade coffee brewer designed to meet the demands of high-volume environments, such as cafes, restaurants, and convenience stores. Renowned for its reliability and performance, the VP17A is engineered to deliver consistent quality coffee with every brew, ensuring that customers enjoy a fresh cup each time.

One of the standout features of the Bunn VP17A is its dual voltage capability, accommodating both 120V and 240V electrical systems. This flexibility allows the brewer to be used in various settings without the need for extensive electrical modifications. Its stainless-steel construction not only enhances durability but also provides an elegant appearance that fits seamlessly into any commercial kitchen environment.

The machine is equipped with a large-capacity water tank that can brew multiple batches of coffee back-to-back. With a brewing capacity of up to 3.8 gallons per hour, the VP17A is ideal for busy establishments where speed is crucial. Its unique spray head design ensures uniform extraction of coffee grounds, resulting in a rich flavor profile and optimal strength in each brew.

Another significant characteristic of the Bunn VP17A is its simplicity of operation. The intuitive control panel allows baristas to easily select brew sizes and manage water flow, making it accessible even for beginners. The brewer features an automatic fill system, which maintains the proper water level for efficient brewing without requiring manual input.

For added convenience, the VP17A also includes a built-in pourover feature, enabling users to brew coffee even in the absence of a direct water line connection. This versatility makes the machine an excellent choice for temporary setups or events where traditional plumbing may not be available.

In terms of technology, the VP17A employs an advanced thermal coffee brewer design that optimizes extraction temperatures, resulting in a balanced flavor profile. The machine is also designed for easy cleaning and maintenance, which is essential for ensuring longevity and sustained performance in a commercial setting.

Ultimately, the Bunn VP17A stands out in the coffee brewing market for its powerful performance, durable construction, and user-friendly design. Its combination of speed, capacity, and innovative features makes it an ideal choice for businesses aiming to serve high-quality coffee quickly and efficiently. With the Bunn VP17A, operators can achieve a consistently excellent brew that keeps customers coming back for more.
Top Page Image Contents