Bunn TNT-3, TNTF-3 manual Probable Cause Remedy

Page 11

TROUBLESHOOTING (cont.)

PROBLEM

Consistently high or low beverage level in the dispenser. (cont.)

PROBABLE CAUSE

REMEDY

2. External Strainer/Flow Control

(A) Direction of flow arrow must be

(.750 GPM)

pointing towards brewer.

 

(B) Remove the strainer/flow con-

 

trol and check for obstructions.

 

Clear or replace.

Spitting or excessive steaming

1. Lime Build-up

CAUTION - Tank and tank compo- nents should be delimed regularly depending on local water condi- tions. Excessive mineral build-up on stainless steel surfaces can ini- tiate corrosive reactions resulting in serious leaks.

Inspect tank assembly for excessive lime deposits. Delime as required.

Drip-out time too long

2.

Control Thermostat

Refer to Service - Control Thermo-

 

 

stat for testing procedures. See

 

 

page 23

1.

Funnel Tip

The brew funnel should be cleaned

 

 

thoroughly before each brew cycle

 

 

to lessen the chance of tea leaf par-

 

 

ticles clogging the drip-out tip.

Dripping from sprayhead

1.Syphon System

2.Lime Build-up

CAUTION - Tank and tank compo- nents should be delimed regularly depending on local water condi- tions. Excessive mineral build-up on stainless steel surfaces can ini- tiate corrosive reactions resulting in serious leaks.

The brewer must be level or slightly lower in front to syphon properly.

Inspect the tank assembly for ex- cessive lime deposits. Delime as required.

3. Brew Solenoid Valve

Refer to Service - Brew Solenoid

A) Iced Tea

Valve (Iced Tea) for testing proce-

 

dures. See page 16

B) Hot Tea

Refer to Service- Brew Solenoid

 

Valve (Hot Tea) for testing proce-

 

dures. See Page 15

Page 11

28201 081500

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Telephone 217 529-6601 FAX 217 Post Office BOX SPRINGFIELD, IllinoisIntroduction ContentsWarranty #00831.0000 #00656.0000 #03408.0000 #03409.0000 User NoticesElectrical Hook-Up Electrical RequirementsPlumbing Requirements Initial SET-UP Plumbing RequirementsInitial SET-UP Adjusting Brew VolumesOperating Controls CleaningICED/OFF/HOT Switch Start SwitchRemedy TroubleshootingProblem Probable Cause Remedy TroubleshootingProblem Brew cycles will not start Brew TimerProblem Probable Cause Remedy Probable Cause Remedy Beverage overflows dispenser Dispenser Water flows into tank continuously Brew TimerOr HOT position PositionFunnel Brewer is making unusal noises Solenoids Remove and clean lime off the tank heater. SeeWeak beverage Filter Type Tea Sprayhead Funnel Loading Dry tea leaves remainContents ServiceComponent Access Solenoid valve ServiceBrew Solenoid Valve HOT TEA Brew Solenoid Valve Iced TEA HOT TEA Brew Timer Brew Timer HOT TEA Early ModelsIf voltage is as described, proceed to #7 Brew Timer HOT TEA Late ModelsDigital Timer Wiring Service Brew Timer HOT TEA Late MODELScontBrew Timer Iced TEA Early Models Iced TEA Brew Timer Brew Timer Iced TEA Late MODELScont Control Thermostat Test Procedures Disconnect the brewer from the power sourceDilution Solenoid Valve Test Procedure Disconnect the brewer from the power sourceLimit Thermostat Limit ThermostatICED/OFF/HOT Switch ICED/OFF/HOT SwitchStart Switch Start SwitchEls Tank HeaterIndication must be Thermal Fuse Service Thermal Fuse Models W/Faucet Only28201
Related manuals
Manual 30 pages 36.83 Kb

TNT-3, TNTF-3 specifications

The Bunn TNTF-3 is a high-performance coffee brewer designed for commercial use, specifically suited for busy environments such as restaurants and cafes. This machine seamlessly combines efficiency with quality, making it a popular choice for professionals who demand the best in their equipment.

One of the standout features of the Bunn TNTF-3 is its three warmer plates, which allow users to brew and store multiple batches of coffee simultaneously. This design ensures that there’s always fresh coffee ready for customers, minimizing downtime during peak service hours. Each warmer has its own independent control, providing versatility in temperature settings to accommodate different coffee types and customer preferences.

The Bunn TNTF-3 utilizes a patented SplashGard funnel that helps to keep the brewing process clean and efficient. This technology not only prevents splashes and messes but also improves user safety by protecting operators from hot water and coffee spills. The brewer’s stainless steel construction contributes to its durability, enhancing its longevity in a high-volume setting.

In terms of brewing capabilities, the TNTF-3 can prepare up to 3.8 gallons of coffee per hour, making it ideal for both small and large operations. The machine is equipped with a brew control feature that allows users to customize the strength and flavor of the coffee, ensuring that each cup meets the highest standards. Additionally, the digital timer and brew status light offer convenient monitoring at a glance.

For ease of maintenance, the Bunn TNTF-3 is designed with accessibility in mind. With removable components and straightforward cleaning procedures, operators can keep the machine in top condition without significant downtime. The brewer also features a low-water shut-off system, which helps to protect the unit from damage due to insufficient water levels.

Overall, the Bunn TNTF-3 embodies a blend of innovative technology, practical design, and optimal performance, making it a powerful tool for coffee professionals. Whether it be for daily service or special events, the Bunn TNTF-3 stands out as a reliable coffee brewing solution that consistently delivers rich, flavorful coffee with every batch. Its combination of speed, safety, and quality assurance solidifies its status as a preferred choice in commercial settings.
Top Page Image Contents