Installation and Operation

Setting the Transmitter Sync Jumpers (Component Video)

By default, each transmitter in the MTP 4T 15HD RS is configured to send bi-level (normal) sync. For HDTV/component video applications, the transmitter can be configured to send tri-level sync as follows:

1.	If applicable, disconnect all power and other cables,
	remove the transmitter from its installation location, and
	remove any previously installed mounting brackets.
2.	Remove the eight screws (three on each side and two on
	top) from the transmitter assembly and lift the top cover
	off of the transmitter (figure 2-1).

For each		N	N	N
transmitter:	T	T	T
	Tri-level			Normal
	Sync		(Bi-level
			J6	Sync)

Lift Cover

Straight Up

			RS	4
		5HD	RS
	4T 1	5HD
MTP	4T 1
MTP

			RS	3
	4T 1	5HD
MTP	4T 1
MTP

			RS	2
	4T 1	5HD
MTP	4T 1
MTP

			RS	1
		5HD	RS
	4T 1	5HD
MTP	4T 1
MTP

Remove (8)

Screws from

Top & Sides

Figure 2-1 — Opening the transmitter assembly and sync jumpering

NThere are four transmitter boards. Ensure that you set the jumper on the correct board.

3.	Locate jumper J6 on the main (bottom) board and shift the
	jumper from the normal sync (N) to the tri-level sync (T)
	position (figure 2-1).

4.	Place the top cover back into place.
5.	Reinstall the screws removed in step 2. If any mounting
	brackets were removed in step 1, put them back into
	position as you reinstall the screws.
6.	If applicable, reinstall the transmitter assembly and
	reconnect all cables.

Installation

CInstallation and service must be performed by authorized personnel only.

The MTP 4T 15HD RS is 1U high and a full rack wide. It is rack mountable, or it can be placed on a table or other furniture. Rubber feet and rack mounting hardware are included.

Tabletop placement

For tabletop use, attach one of the self-adhesive feet to each corner of the bottom side of the unit and place the unit in the desired location.

Rack mounting

UL requirements

The following Underwriters Laboratories (UL) requirements pertain to the installation of the unit into a rack.

1.Elevated operating ambient temperature — If the equipment is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consider installing the equipment in an environment compatible with the maximum 122° F (50° C) ambient temperature (Tma) specified by the manufacturer.

2.Reduced air flow — Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

3.Mechanical loading — Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

4.Circuit overloading — Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

2-2

MTP 4T 15HD RS • Installation and Operation

2-3

MTP 4T 15HD RS specifications

Extron Electronics, a renowned leader in the field of AV technology, has developed a range of innovative solutions for seamless audio and video distribution. One standout product in their lineup is the Extron MTP 4T 15HD RS, an advanced matrix switcher designed to address the growing demand for efficient signal routing in modern AV installations.

The MTP 4T 15HD RS is specifically engineered to handle multiple high-definition video signals while ensuring reliable and robust performance. This matrix switcher supports a variety of input formats including VGA, composite video, SDI, and various HDMI formats, making it a versatile solution for diverse application needs. With up to 15 HD-SDI inputs, the device allows users to connect a wide range of sources, facilitating flexibility in system design and implementation.

One of the key features of the MTP 4T 15HD RS is its capability to support long-distance transmission of signals. Utilizing Extron’s proprietary MTP technology, the switcher can transmit high-definition video and embedded audio over twisted pair cables, allowing for distances of up to 300 feet without signal degradation. This ensures that installations can use affordable cabling solutions while maintaining excellent signal quality.

The MTP 4T 15HD RS is equipped with reliable EDID management capabilities, ensuring optimal communication between the source devices and displays. This feature automatically detects and manages the compatible display resolutions, simplifying setup and minimizing compatibility issues. Additionally, the switcher supports audio breakaway functionality, which enables users to route audio and video signals independently, enhancing the versatility of the installation.

Further enhancing its usability, the MTP 4T 15HD RS supports control via Extron’s PCS (Programmable Control System) and RS232 commands, allowing for seamless integration into custom control systems. For ease of configuration, the front panel features LED indicators for power and input status, providing real-time feedback on system operation.

In conclusion, the Extron MTP 4T 15HD RS stands out as a robust, flexible, and user-friendly solution for HD signal distribution in various AV environments. With its combination of advanced technologies, extensive compatibility, and user-centric features, it addresses the needs of modern AV professionals and fulfills the demands of sophisticated system integration. Whether for corporate meetings, educational settings, or live events, the MTP 4T 15HD RS delivers reliable and high-quality performance, making it an invaluable asset in any AV toolbox.