Bunn P2896 warranty Brewing Delicious Coffee or TEA, Press a pod into the pod holder

Page 10

BREWING DELICIOUS COFFEE OR TEA

WARNING: Never place hands directly under pod holder outlet. Hot water can be present.

WARNING: Never remove the holder with force. If stuck, wait 10 minutes and try again.

WARNING: Never brew without the pod holder insert in place.

1. Open the slide lid.

P2941

7. Press a pod into the pod holder.

P2909

(CAUTION: Do not place brewer in sink or other water source.)

2. Fill the reservoir above the minimum line, up to the maximum line with fresh cold water.

P2919

(NOTE: For best results, center pod in holder and gently press the pod completely into holder cavity.)

8. Insert the loaded pod holder into the brewer and press all the way in to lock holder.

P2903

3. Close the slide lid.

P2902

4. Adjust the volume control lever to the desired volume.

(See page 11 for brewing tips)

P2952

(NOTE: Minimum volume is approx. 4 oz. (118 ml) Maximum is approx. 12 oz. (355 ml) Settings are in one ounce (30 ml) increments.)

5. Place a mug, larger than the volume selected, on the drip tray grate below the pod holder outlet.

P2904

6. Press and hold the pod holder release button while sliding the pod holder out.

P2908

(NOTE: You should hear a clicking sound when the pod holder locks in place.)

9. Press and release

 

the Coffee or Tea

 

button. To cancel

 

a brew, press and

 

release the Coffee or

 

Tea button.

P2907

10. When brewing has

 

stopped, press and hold

 

the pod holder release

 

button while sliding the

 

pod holder out.

 

 

P2908

(NOTE: The red BUNN light will come back on indicating the brew cycle has finished.)

11. Dispose of the used pod.

Do Not Touch Hot Pod!

P2911

(NOTE: Use care not to dispose of pod insert.)

Enjoy!

(Caution: Beverage is very hot.)

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents My Café Tea & Coffee Pod Brewer Table of Contents Introduction SpecificationsUser Notices Important Handling InformationImportant Safeguards Do not use brewer for other than its intended useGeneral Information Features & Controls Refill Water Indicator Coffee Brew ButtonDefinitions ComponentsFeatures Control PanelPlug in the brewer and turn on the power switch Initial Brewer SET-UPBrewing Delicious Coffee or TEA Press a pod into the pod holderCoffee Fundamentals HOT WaterBrewing Tips Water Quality Golden CUP StandardPeriodic CLEANING/DESCALING Routine CleaningRecommended At Least Once a Month Cleaning the SPRAYHEAD/SEAL Assembling the SPRAYHEAD/SEALCycling the Brewer Cleaning the POD HolderInspecting the Sprayhead Seal Storing the BrewerTroubleshooting ExplanationPOD Holder Indicator has come on Water Reservoir has run low on waterTroubleshooting SituationexplanationIndicator coming on during a brew cycle is normal Bunn Replacement Parts POD Holder InsertsLimited Warranty Service Center Locations Authorized ServiceFor Service Information Contact Bunn-O-Matic Corporation To purchase parts, see

P2896 specifications

The Bunn P2896 is a highly regarded commercial coffee brewer designed to meet the demands of busy cafés, restaurants, and offices. This unit is known for its ability to deliver high-quality coffee quickly and consistently, making it a preferred choice for those who value efficiency without compromising on taste.

One of the standout features of the Bunn P2896 is its dual thermal carafes, which allow for brewing and serving coffee simultaneously. This design ensures that hot coffee is always available, catering to high demand periods without the need for extensive wait times. Each carafe can hold approximately 1.9 liters, offering ample capacity for gatherings and busy service hours.

The P2896 utilizes advanced brewing technology that includes a unique pre-infusion system. This feature allows the coffee grounds to bloom before the full brewing cycle begins, ensuring optimal extraction and enhancing flavor profiles. This step helps in producing a more aromatic and richly flavored coffee, appealing to discerning coffee drinkers.

Temperature control is another crucial aspect of the Bunn P2896. It is equipped with a powerful heating element that maintains water at the ideal brewing temperature between 200°F to 205°F. This precision ensures consistent results every time and helps in preserving the integral qualities of the coffee being brewed.

Ease of use is also a major characteristic of the Bunn P2896. The brewer is designed with user-friendly controls that allow staff to operate it with minimal training. The streamlined interface and clear indicators simplify the brewing process, making it accessible for even the busiest environments.

Moreover, the Bunn P2896 is built with durability in mind. Its robust construction ensures long-term reliability, capable of withstanding the rigors of continual use in high-traffic locations. The stainless-steel finish not only adds to its aesthetic appeal but also ensures that it is easy to maintain and clean.

In summary, the Bunn P2896 stands out for its dual carafe system, advanced brewing technology, precise temperature control, user-friendly design, and durable construction. These features combine to make it a top choice for any business looking to serve exceptional coffee efficiently.
Top Page Image Contents