Bunn P2896 warranty General Information

Page 5

GENERAL INFORMATION

Improper installation could result in permanent damage and void the limited warranty. Read & follow the instructions on page 9.

•Use CAUTION when dispensing hot water from the brewer. The water from your BUNN® Pod brewer is approximately 200°F (93°C). This is approximately 50°F (10°C) hotter than the hot water from your faucet and must be handled with care.

•This brewer is designed to remain plugged in at all times (except during initial installation, cleaning, or when brewer will not be used for an extended period of time).

•A power switch is provided on the lower left side to completely shut off all electrical components when your plans take you away from the brewer for three or more days. Safety features, designed into the BUNN® Pod brewer, make the daily use of this switch unnecessary.

•Whenever the brewer has been shut off or unplugged for an extended period of time, rinse the reservoir and refill with fresh cold water before using. It is also recommended that the brewer be cycled. (See page 15)

•Your BUNN® Pod brewer has a specially designed tank to keep the water inside at the proper temperature. This constant supply of hot water assures the correct method of brewing in less than one minute.

•When inserting a pod into the pod holder, it is important to seat the pod all the way into the holder cavity. Leaks could occur if the pod is too large, or does not seat completely into the holder cavity. Ensure that all of the paper edge and any tabs of the pod are inserted into the holder cavity.

•While brewing, the newest water in the tank is also being heated to the proper temperature and held until needed.

•The brewer is equipped with a 120 volt, 3-prong grounded cord set. The plug is provided with a round grounding pin. This is a safety feature and allows the plug to fit into a properly grounded outlet. If the plug does not fit into the outlet, contact an electrician to update your outlet. Attempting to bypass the safety aspect of this plug will void the warranty.

•The sprayhead may become loose over time. Unplug the machine and allow it to cool down before tightening or removing the sprayhead. Use extreme caution not to burn yourself. Tighten or remove the sprayhead with your fingertips. (Refer to page 14)

•CAUTION: Never apply force to remove the pod holder. If the holder does not slide out easily, wait 10 minutes and try again. Burns resulting from hot water splash could occur if the holder is forcibly removed from the brewer.

•Use CAUTION to avoid burns during consumption of any freshly brewed beverage. Servings are extremely hot.

•To stop a brew cycle in process, press the Coffee or Tea button again. (See Page 7)

•When operating the brewer on a standard household outlet, do not attempt to power other appliances on the same circuit. Circuit overload could occur.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents My Café Tea & Coffee Pod Brewer Table of Contents User Notices SpecificationsIntroduction Important Handling InformationDo not use brewer for other than its intended use Important SafeguardsGeneral Information Refill Water Indicator Coffee Brew Button Features & ControlsComponents DefinitionsControl Panel FeaturesInitial Brewer SET-UP Plug in the brewer and turn on the power switchPress a pod into the pod holder Brewing Delicious Coffee or TEABrewing Tips HOT WaterCoffee Fundamentals Golden CUP Standard Water QualityRecommended At Least Once a Month Routine CleaningPeriodic CLEANING/DESCALING Assembling the SPRAYHEAD/SEAL Cleaning the SPRAYHEAD/SEALInspecting the Sprayhead Seal Cleaning the POD HolderCycling the Brewer Storing the BrewerExplanation TroubleshootingWater Reservoir has run low on water POD Holder Indicator has come onSituationexplanation TroubleshootingIndicator coming on during a brew cycle is normal POD Holder Inserts Bunn Replacement PartsLimited Warranty For Service Information Contact Bunn-O-Matic Corporation Authorized ServiceService Center Locations To purchase parts, see

P2896 specifications

The Bunn P2896 is a highly regarded commercial coffee brewer designed to meet the demands of busy cafés, restaurants, and offices. This unit is known for its ability to deliver high-quality coffee quickly and consistently, making it a preferred choice for those who value efficiency without compromising on taste.

One of the standout features of the Bunn P2896 is its dual thermal carafes, which allow for brewing and serving coffee simultaneously. This design ensures that hot coffee is always available, catering to high demand periods without the need for extensive wait times. Each carafe can hold approximately 1.9 liters, offering ample capacity for gatherings and busy service hours.

The P2896 utilizes advanced brewing technology that includes a unique pre-infusion system. This feature allows the coffee grounds to bloom before the full brewing cycle begins, ensuring optimal extraction and enhancing flavor profiles. This step helps in producing a more aromatic and richly flavored coffee, appealing to discerning coffee drinkers.

Temperature control is another crucial aspect of the Bunn P2896. It is equipped with a powerful heating element that maintains water at the ideal brewing temperature between 200°F to 205°F. This precision ensures consistent results every time and helps in preserving the integral qualities of the coffee being brewed.

Ease of use is also a major characteristic of the Bunn P2896. The brewer is designed with user-friendly controls that allow staff to operate it with minimal training. The streamlined interface and clear indicators simplify the brewing process, making it accessible for even the busiest environments.

Moreover, the Bunn P2896 is built with durability in mind. Its robust construction ensures long-term reliability, capable of withstanding the rigors of continual use in high-traffic locations. The stainless-steel finish not only adds to its aesthetic appeal but also ensures that it is easy to maintain and clean.

In summary, the Bunn P2896 stands out for its dual carafe system, advanced brewing technology, precise temperature control, user-friendly design, and durable construction. These features combine to make it a top choice for any business looking to serve exceptional coffee efficiently.
Top Page Image Contents