Initial SET-UP, Electrical Requirements

INITIAL SET-UP

1.Apply the four non-skid pads from the parts box to the bottom of the legs.

2.Remove the drip tray assembly, drip tray bracket, and splash panel assembly from the parts box.

3.Place a set of key holes in the drip tray bracket over the lower two screws in the panel below the hopper access door; push down gently and tighten screws.

4.Place the set of key holes in the splash panel over the upper two screws and position so the screws are between the holes.

ELECTRICAL REQUIREMENTS

CAUTION - The dispenser must be disconnected from the power source until specified in Electrical Hook-Up. The 120 volt version of this dispenser has an attached cordset. The mating connector must be a NEMA 5-15R.

To access terminal block for high voltage models without a cordset, remove left side panel.

	BLK	L1
		L1
	WHI	220-240V. A.C.
	WHI	L2
		L2

GRN/YELGRN/YEL

220-240V AC

single phase models

Note: This electrical service consists of 2 current carry- ing conductors (L1 and L2) and a separate conductor for earth ground.

Electrical Hook-Up

CAUTION - Improper electrical installation will damage electronic components.

1.An electrician must provide electrical service as specified.

2.Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

3.Place the ON/OFF/NIGHT switch in the “ON” position.

4.Connect the dispenser to the power source.

5.If plumbing is to be hooked up later be sure the dispenser is disconnected from the power source. If plumb- ing has been hooked up, the dispenser is ready for Initial Fill & Heat.

CE REQUIREMENTS

•This appliance must be installed in locations where it can be overseen by trained personnel.

•For proper operation, this appliance must be installed where the temperature is between 5°C to 35°C.

•Appliance shall not be tilted more than 10° for safe operation.

•An electrician must provide electrical service as specified in conformance with all local and national codes.

•This appliance must not be cleaned by water jet.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given instructions concerning use of this appliance by a person responsible for its safety.

•Children should be supervised to ensure they do not play with the appliance.

• If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel with a special cord available from the manufacturer or its authorized service personnel in order to avoid a hazard.

• Machine must not be immersed for cleaning.

4	37510 051311

IMIX-4, IMIX-5 specifications

The Bunn IMIX-5 and IMIX-4 are advanced coffee brewers designed for commercial applications, particularly in high-demand environments where consistency and quality are essential. These machines are well-known for their user-friendly features and innovative technologies, making them a favorite choice among coffee shops, restaurants, and hotels.

One of the standout characteristics of the Bunn IMIX brewers is their intelligent brewing technology. The IMIX-5 and IMIX-4 are equipped with precise brew controls, allowing operators to customize brew times and temperatures to achieve the optimal flavor profile for different coffee blends. This flexibility ensures that each cup of coffee meets the highest standards, whether it’s a rich espresso or a smooth drip brew.

The IMIX-5 model offers the ability to brew five different coffee styles concurrently, making it ideal for busy establishments that cater to diverse customer preferences. It features multiple brew baskets and a large capacity, which reduces wait times during peak service hours. On the other hand, the IMIX-4 is designed for slightly lower volume settings while still offering the same reliability and quality.

Both models come with intuitive touch control displays that simplify the brewing process. Operators can easily adjust settings, choose brew options, and monitor performance, all from a user-friendly interface. Moreover, these machines are designed for easy cleaning and maintenance, enhancing their longevity and ensuring that they remain in peak operating condition.

Another key feature of the Bunn IMIX brewers is their unique temperature stability technology. This ensures that water temperature remains consistently within the ideal range for brewing, thereby enhancing the extraction process and resulting in a richer, more flavorful cup. Additionally, the machines are built with robust materials that are designed to withstand the rigors of daily use, ensuring dependability and durability.

In conclusion, the Bunn IMIX-5 and IMIX-4 coffee brewers stand out for their combination of innovative technology, user-friendly features, and durability. Their intelligent brewing capabilities, customizable settings, and ease of maintenance make them excellent choices for any commercial coffee environment. Whether you are serving a high volume of customers or seeking to enhance your coffee offerings, these machines provide the tools necessary to achieve exceptional results, time after time.