Bunn IMIX-5, IMIX-4 service manual Rinse Timer, Running a Rinse Sequence, Preventive Maintenance

Page 6

RINSE TIMER

The dispenser is shipped from the factory with the rinse timer disabled. To enable the rinse timer, refer to Programming the Dispenser and select yes in the “Rinse Alarm ?” screen; set timer to the desired time and exit the programming mode.

When enabled, the rinse timer automatically keeps track of the time since the dispenser was last run through a rinse sequence. If the dispenser detects that a rinse sequence has not been run for the desired time, a mes- sage will appear on the LCD display. If the Lockout is set, after an additional 4 hours, a rinse cycle has still not been run, the LCD display will display a message, and the hopper drives will be disabled until a rinse sequence has been run.

RUNNING A RINSE SEQUENCE

1.Place the Normal/Program/Rinse switch (page 10) in the “rinse” position.

2.Sequentially at each position, press all of the dispense switches. The dispenser will run for 10 seconds with the hopper(s) disabled.

3.As each position is rinsed, the LCD display will show which position is being rinsed and count down from 10 seconds.

4.After all positions have been rinsed, return the Normal/Program/Rinse switch to the “Normal” position.

DISPENSER USE - Self Serve

1.Simply place a cup on the drip tray beneath the desired dispensing tip.

2.Press the button to froth and dispense the beverage.

3.Release the button when the cup is approximately 3/4 full and allow the mixing chamber to drain. Note - The mixing chamber must drain at the end of each dispense.

DISPENSER USE - Portion Control

1.Simply place a cup on the drip tray beneath the desired dispensing tip.

2.Select the appropriate button for the cup size under the dispense tip, press momentarily, then release.

3.Let the mixing chamber completely drain before removing cup.

HOT WATER DISPENSE - IMIX-5 only

1.Simply place a cup on the drip tray beneath the hot water dispense arrow.

2.Press the button to dispense hot water.

3.Release the button when the desired amount is reached.

PREVENTIVE MAINTENANCE

Bunn-O-Matic®Corporation recommends that preventive maintenance be performed at regular intervals. Maintenance should be performed by a qualified service technician. For Technical Service, contact Bunn-O-Matic®Corporation at 1-800-286-6070.

NOTE: Replacement parts or service caused by failure to perform required maintenance is not covered by warranty.

Cycle

Item

Part Number

(months)

6

Mixing Chamber Kit

32906.0001

 

 

 

 

3 or as

Whipper Shaft Seal Kit

26356.1000

needed

 

 

6

37510 051311

Image 6
Contents IMIX-3 IMIX-4 IMIX-5 BUNN-O-MATIC Commercial Product Warranty User Notices Initial SET-UP Electrical RequirementsCE Requirements Plumbing HOOK-UP Preset Tank TemperaturePlumbing Requirements Initial Fill & HeatRinse Timer Preventive MaintenanceRunning a Rinse Sequence Sanitize CleaningWash Lave Rinse Dry SequeDraining the HOT Water Tank Door Graphic and Lens InstallationHopper Dispense Rate of Product Hopper Level Sensor CalibrationGlossary Calibrate temperature probe Set refill probe thresholdTurns on audio alarm Enter asset number of machineImportant Programming Notes Read Carefully Programming SwitchesProgramming the Dispenser Gram Home Screen Program Home ScreenProgramming the Dispenser ON/OFF/NIGHT switch Adjust tank Continue to FFINISHED, returns to main screen Returns to a Returns to EGoes to next station After last stationReturns to K Continues after lastStation Returns to G
Related manuals
Manual 27 pages 12.18 Kb

IMIX-4, IMIX-5 specifications

The Bunn IMIX-5 and IMIX-4 are advanced coffee brewers designed for commercial applications, particularly in high-demand environments where consistency and quality are essential. These machines are well-known for their user-friendly features and innovative technologies, making them a favorite choice among coffee shops, restaurants, and hotels.

One of the standout characteristics of the Bunn IMIX brewers is their intelligent brewing technology. The IMIX-5 and IMIX-4 are equipped with precise brew controls, allowing operators to customize brew times and temperatures to achieve the optimal flavor profile for different coffee blends. This flexibility ensures that each cup of coffee meets the highest standards, whether it’s a rich espresso or a smooth drip brew.

The IMIX-5 model offers the ability to brew five different coffee styles concurrently, making it ideal for busy establishments that cater to diverse customer preferences. It features multiple brew baskets and a large capacity, which reduces wait times during peak service hours. On the other hand, the IMIX-4 is designed for slightly lower volume settings while still offering the same reliability and quality.

Both models come with intuitive touch control displays that simplify the brewing process. Operators can easily adjust settings, choose brew options, and monitor performance, all from a user-friendly interface. Moreover, these machines are designed for easy cleaning and maintenance, enhancing their longevity and ensuring that they remain in peak operating condition.

Another key feature of the Bunn IMIX brewers is their unique temperature stability technology. This ensures that water temperature remains consistently within the ideal range for brewing, thereby enhancing the extraction process and resulting in a richer, more flavorful cup. Additionally, the machines are built with robust materials that are designed to withstand the rigors of daily use, ensuring dependability and durability.

In conclusion, the Bunn IMIX-5 and IMIX-4 coffee brewers stand out for their combination of innovative technology, user-friendly features, and durability. Their intelligent brewing capabilities, customizable settings, and ease of maintenance make them excellent choices for any commercial coffee environment. Whether you are serving a high volume of customers or seeking to enhance your coffee offerings, these machines provide the tools necessary to achieve exceptional results, time after time.