Bunn Axiom manual SET Pulse Brew ? Noyes Drip Time, Enable Clean No Done YES

Page 10

ADJUSTMENTS & OPTIONAL SETTINGS (CONT.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

"EASY PULSE BREW" times:

Min: Base brew time + 40 seconds

Max: Base brew time + 3:00 minutes

SET PULSE BREW ?

NOYES

DRIP TIME 0:30

(-) DONE (+)

ENABLE CLEAN

NO DONE YES

Enabl EnergySavr

NO DONE YES

EnableFreshTimer

NO DONE YES

This function allows the sprayhead to “pulse” on and off dur- ing a brew cycle. These times can be set two different ways. The first is by setting the total brew time in the "EASY PULSE BREW" screen. The other option allows the actual times to be entered in the "MANUAL PULSE BREW" screen.

NOTE: This will overwrite settings in "BREW METER".

Adjusts the DRIP TIME (time from end of sprayhead flow to when liquid stops dripping from the funnel). When the brew cycle is complete, the display will show "DRIPPING" and will countdown the time until the funnel empties.

RANGE: "OFF" or 0:05 to 4:00 minutes

Set the time before a cleaning alert will be displayed. RANGE: 1 to 30 days

Enables the mode function and sets the idle time.Then choose to have the tank heater(s) turn off, or reduce the tank temp to (140° F) or (60° C) once the set idle time has expired.

Range: 0.5 to 24.0 hrs

Enables the "FRESHNESS ALERT!" message and sets the expiration time. The expiration time is the amount of time the product is allowed to sit in the server before an alert message is displayed.

Range: 0.5 to 4.0 hrs

ENABL WARMER OFF NO DONE YES

Sets the amount of time a warmer will remain on after being turned on. Each warmer has an independent timer and is af- fected by its corresponding switch. NOTE: The lower "Brew" warmer timer is restarted when brew switch is pressed. Range: 15mins to 6.0 hrs in 15 min increments.

0REFILL 155

(-) DONE (+)

Adjusts the sensitivity of the refill circuit. Water in different geographical locations can have different conductivities. Make sure the water in the tank is touching the refill probe. NOTE: Always make sure that the # on the right is larger than the # on the left when water is contacting the tank refill probe.

Page 10

41154 041708

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Programming Manual BUNN-O-MATIC Commercial Product Warranty Contents IntroductionAdjustments & Programming Program Functions Brew WizardBrew OZ Adjustments & Optional SettingsBrew Meter Enable ADS Scrol Thru Alpha Write TOP Line ? Not SavedEnter Service #? Noyes Service NumberProgramming Functions Level Enter Password Next Next Number Scroll Done Next ExitingEnter Asset # ? Noyes SET Password SET Language Noyes Units Metric Done ENGSET Ready RememberSET Pulse Brew ? Noyes Drip Time Enable Clean No Done YESEnabl Warmer OFF no Done YES Pertains only to software version 1.07 & above Programming Functions Level 2 Enable BrewLOGICCont Brewer must not be bumped during calibrationEnter OZ Container READY? QuityesCalibrate Spray Press Brew Start Spray OZ/MIs flowing. Use the Calibrate Flow screen to obtain Initial Factory Default ValuesDone Software Version 1.07 & aboveProbable Cause TroubleshootingProblem RemedyTroubleshooting Problem Probable Cause RemedyBe at least 195F 90C Check Sprayhead for

Axiom specifications

The Bunn Axiom is a premier coffee brewing system known for its innovative design and reliability in high-volume coffee production. This professional-grade machine is widely used in commercial settings such as restaurants, hotels, and offices, where quality and efficiency are paramount.

One of the standout features of the Bunn Axiom is its dual-brew option, which allows users to produce both direct-to-pot and drip-through brewing styles. This flexibility enables establishments to cater to diverse customer preferences, whether it's brewing a full pot of coffee for an event or single servings for customers on the go.

The machine also boasts an impressive brewing capacity, with some models capable of brewing up to 19.2 gallons of coffee per hour. This feature is essential for busy environments where demand can rapidly increase during peak hours. The Bunn Axiom is equipped with multiple brewing heads, ensuring that service remains uninterrupted, even during high-demand periods.

In terms of technology, the Bunn Axiom utilizes a state-of-the-art digital control system, allowing for precise temperature control and brewing time adjustments. This advanced feature ensures consistent quality across every batch, optimizing the extraction process to highlight the rich flavors of the coffee. Additionally, the machine includes a built-in heat retention system, keeping coffee at ideal serving temperatures for longer periods.

Durability is another critical characteristic of the Bunn Axiom. Constructed from stainless steel, the machine is designed to withstand the rigors of commercial use while being easy to clean and maintain. Its compact footprint also makes it suitable for establishments with limited counter space, while a user-friendly interface simplifies operation for staff.

Overall, the Bunn Axiom stands out in the commercial coffee brewing landscape for its combination of high-capacity brewing, user-friendly technology, and robust design. Whether brewing for a small office or a bustling cafe, the Bunn Axiom delivers exceptional performance and quality with every cup, making it a preferred choice among coffee professionals.
Top Page Image Contents