Bunn Guide to Axiom Coffee Maker: Programming, Water Adjustment & Troubleshooting
Page 4
41154 041708
Disconnect brewer from power source before removing any panel!

ADJUSTMENTS & PROGRAMMING

PROGRAMMING THE BREWER

The programming of the brewer is divided into two levels. Brewing adjustments are in "BrewWiz- ard". Service functions are accessed in Level 2.

The following function screens are in order of appearance. Each screen will have instructions on how to access, and the procedures to program the various functions of the brewer.

IMPORTANT PROGRAMMING NOTES

- READ CAREFULLY -

To exit the programming mode at any time, press and release "ENABLE BREW ON/OFF" switch located on the front switch panel. The display will return to the MAIN SCREEN.

If none of the five programming switches are pressed within one minute during the setup of the brewer, the programming of the function screen that is being set will be exited and the display will return to the MAIN SCREEN.

Always remember to place an empty server and funnel under the sprayhead when operating the brewer during the set-up of PULSE BREW, CALIBRATE FLOW and testing the brew valve in SER-

VICE TOOLS/TEST OUTPUTS.

PROGRAM FUNCTIONS - BREW WIZARD

MAIN SCREEN

READY TO BREW WATER TEMP: 200°

BREW LOCKOUT

This function allows the operator to prevent or allow brewing if the water temperature is less than the set READY temperature.

To access this function screen press and hold the right hidden switch.Release when the display reads: "BREW WIZARD" it will then read:

PROGRAMMING LOCKOUT SWITCH (Mounted on main control board)

This switch can be set to prevent access to the programming settings of the brewer. Once all the correct brew settings are programmed, the operator can set the switch to the "ON" position to prohibit anyone from changing the settings.With the switch in the "ON" position, the programming menus can still be accessed to view the current settings. However, no changes will be saved.

BREW LOCKOUT? NO DONE YES

Press here Press here Press here for NO for DONE for YES

P3634

The YES or NO should be flashing. Select YES to prevent brewing if the water temperature is below the set READY temperature. Select NO to permit brewing at any water temperature.

When finished, press and release DONE. This will step to the next function screen. To return to the MAIN SCREEN at any time, press and release "ENABLE BREW ON/OFF".

Page 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Programming Manual BUNN-O-MATIC Commercial Product Warranty Contents IntroductionAdjustments & Programming Program Functions Brew WizardBrew OZ Adjustments & Optional SettingsBrew Meter Enable ADS Scrol Thru Alpha Write TOP Line ? Not SavedService Number Programming Functions Level Enter PasswordEnter Service #? Noyes Next Next Number Scroll Done Next ExitingSET Password SET Language Noyes Units Metric Done ENG SET ReadyEnter Asset # ? Noyes RememberSET Pulse Brew ? Noyes Drip Time Enable Clean No Done YESEnabl Warmer OFF no Done YES Programming Functions Level 2 Enable BrewLOGIC ContPertains only to software version 1.07 & above Brewer must not be bumped during calibrationContainer READY? Quityes Calibrate Spray Press Brew StartEnter OZ Spray OZ/MInitial Factory Default Values DoneIs flowing. Use the Calibrate Flow screen to obtain Software Version 1.07 & aboveTroubleshooting ProblemProbable Cause RemedyTroubleshooting Problem Probable Cause RemedyBe at least 195F 90C Check Sprayhead for

Axiom specifications

The Bunn Axiom is a premier coffee brewing system known for its innovative design and reliability in high-volume coffee production. This professional-grade machine is widely used in commercial settings such as restaurants, hotels, and offices, where quality and efficiency are paramount.

One of the standout features of the Bunn Axiom is its dual-brew option, which allows users to produce both direct-to-pot and drip-through brewing styles. This flexibility enables establishments to cater to diverse customer preferences, whether it's brewing a full pot of coffee for an event or single servings for customers on the go.

The machine also boasts an impressive brewing capacity, with some models capable of brewing up to 19.2 gallons of coffee per hour. This feature is essential for busy environments where demand can rapidly increase during peak hours. The Bunn Axiom is equipped with multiple brewing heads, ensuring that service remains uninterrupted, even during high-demand periods.

In terms of technology, the Bunn Axiom utilizes a state-of-the-art digital control system, allowing for precise temperature control and brewing time adjustments. This advanced feature ensures consistent quality across every batch, optimizing the extraction process to highlight the rich flavors of the coffee. Additionally, the machine includes a built-in heat retention system, keeping coffee at ideal serving temperatures for longer periods.

Durability is another critical characteristic of the Bunn Axiom. Constructed from stainless steel, the machine is designed to withstand the rigors of commercial use while being easy to clean and maintain. Its compact footprint also makes it suitable for establishments with limited counter space, while a user-friendly interface simplifies operation for staff.

Overall, the Bunn Axiom stands out in the commercial coffee brewing landscape for its combination of high-capacity brewing, user-friendly technology, and robust design. Whether brewing for a small office or a bustling cafe, the Bunn Axiom delivers exceptional performance and quality with every cup, making it a preferred choice among coffee professionals.
Top Page Image Contents