Bunn 40119.0000G manual Electrical Requirements, 400/230V volt ac three phase 50/60 Hz models

Page 4

ELECTRICAL REQUIREMENTS

WARNING - If the power cord is ever damaged, it must be replaced by the manufacturer or its service agent with a special cord available from the manufacturer or its service agent in order to avoid a hazard.

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

WHI

N

BLU

L3

RED

L2

BLK

L1

GREENGREEN

120/208 and 120/240 volt ac three phase, 50/60 Hz models

BLK BLU

TO MACHINE

WHI

RED

 

L1

L2

L3

N

FROM POWER SOURCE

FOR SINGLE PHASE OPERATION MOVE BLU WIRE INTO TERMINAL BLOCK WITH BLACK WIRE. CONNECT INPUT WIRING TO:

L1, L2 & N FOR 120/208V & 120/240V MODELS,

L1 & N for 230V MODELS.

WHI

N

BLU

L3

RED

L2

BLK

L1

GREENGREEN

400/230V volt ac three phase,

50/60 Hz models

Note: This electrical service consists of 4 cur- rent carrying conductors (Neutral, L1, L2 and L3) and a separate conductor for earth ground.

Note: This electrical service consists of 4 cur- rent carrying conductors (Neutral, L1, L2 and L3) and a separate conductor for earth ground.

SYSTEM

 

 

VOLTAGE

V1

V2

208

208

120

240

240

120

L1, L2, L3, are the 3 phases

V1 = Phase to phase voltage, between any 2 phases.

V2 = Phase to neutral voltage, L1 to neutral must be 120V.

SYSTEM

 

 

VOLTAGE

V1

V2

400

400

230

230

 

230

L1, L2, L3, are the 3 phases

V1 = Phase to phase voltage, between any 2 phases.

V2 = Phase to neutral voltage, L1 to neutral must be 230V.

ELECTRICAL HOOK-UP

CAUTION – Improper electrical installation will damage electronic components. Damage caused by incorrect electrical connections is not covered by warranty.

1.An electrician must provide electrical service as specified in conformance with all local, state and federal electrical codes.

2.Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

NOTE - The brewer is shipped without a plug on the power cord. Qualified service personnel must select and install the proper UL listed grounding type attachment plug specified on the rear of the brewer.

3.Install the specified plug on the attached power cord.

4.Remove the front access panel to gain access to the terminal block.

5.Connect the brewer to the power source and verify the voltage at the terminal block before proceeding.

6.If plumbing is to be hooked up later be sure the brewer is disconnected from the power source. If plumbing has been hooked up, the brewer is ready for Initial Set-Up.

Page 4

40119 080108

 

Image 4
Contents Titan Dual Phone 217 529-6601 FAX 217Introduction #00986.0000 User Notices#00658.0000 400/230V volt ac three phase 50/60 Hz models Electrical RequirementsCE Requirements Plumbing RequirementsPlumbing Hook UP Tank DrainOperating Controls Programming leftTemperature Selection Procedure for setting the Set TempInitial SET-UP SET Temp Range 185˚F 85˚C to 205˚F 96˚CCoffee Brewing Procedure to set ready temperatureReady Temp Range 2 to 20 F 2 to 10 C Cleaning Viewing Asset & Serial Number

40119.0000G specifications

The Bunn 40119.0000G is a high-performance commercial coffee maker designed to meet the rigorous demands of the food service industry. Known for its reliability and efficiency, this machine is ideal for restaurants, cafés, and coffee shops looking to serve large volumes of quality coffee without sacrificing taste or speed.

One of the standout features of the Bunn 40119.0000G is its ability to brew multiple pots of coffee in quick succession. With a capacity to brew up to 3.8 gallons per hour, it is equipped with a unique brewing system that ensures optimal extraction and flavor. This makes it perfect for busy environments where time is of the essence. The machine utilizes a patented "internally plumbed" brewing system, which means it is directly connected to a water source, allowing for an uninterrupted brewing process.

Another notable characteristic of the Bunn 40119.0000G is its stainless steel construction, providing durability and a sleek appearance that fits well in any commercial setting. The materials used in its design not only contribute to its longevity but also make it easy to clean and maintain. The machine is designed for efficient operation, with hot water capabilities that allow for steaming or hot water dispensing for other beverages.

The digital temperature control is one of the advanced technologies incorporated into the Bunn 40119.0000G. This feature allows users to adjust brewing temperatures to suit different coffee types, ensuring each brew reaches its full flavor potential. Additionally, it comes with a brew counter, offering operators the ability to monitor usage and maintain consistent quality.

Safety and convenience are also integral to the design of the Bunn 40119.0000G. It includes features such as an automatic shut-off mechanism and an integrated drip tray to manage spills and overflow effectively. The machine's footprint is compact enough to fit in various kitchen layouts, making it a versatile option for establishments with limited space.

In summary, the Bunn 40119.0000G combines high capacity brewing, robust construction, advanced technology, and user-friendly features to deliver exceptional performance. Its ability to produce consistent, high-quality coffee quickly makes it a favored choice among coffee professionals looking to elevate their coffee service while maintaining efficiency and quality.