Bunn 40119.0000G manual Coffee Brewing, Ready Temp Range 2 to 20 F 2 to 10 C

Page 8
Fold over top edge of filter

TEMPERATURE SELECTION (cont.)

READY TEMP - Range: 2° to 20° F (2° to 10° C)

This function allows the operator to set the minimum temperature allowable to start a brew cycle. The range can be from 2° to 20° F within the set temperature. The water must be at the READY temperature or higher for the display to indicate READY TO BREW. If brew lockout is enabled, the brewing process will not start below this READY temperature.

READY TEMP: XXX° (-) DONE (+)

Procedure to set ready temperature:

1.Press and hold the right hidden switch until display reads SET LANGUAGE. Press and release the right hid- den switch until display reads READY TEMP: XXX°.

2.Using (-)and (+), adjust the ready temperature.

3.When finished, press DONE to save the new setting and to advance to the next function screen, BREW SET- TINGS ?. Press and release the ON/OFF switch (either on DUAL brewers) to exit programming and return to the MAIN SCREEN.

COFFEE BREWING

1. Begin each brew cycle with a clean empty brew funnel.

2. Insert a BUNN filter into the funnel.

NOTE: The funnels are equipped with 4 wire loops that can be folded over top edge of filter if desired, to prevent filter from folding in during the brew cycle.

3.Pour the fresh coffee into the filter and level the bed of grounds by gently shaking.

4.Slide the funnel into the funnel rails of the selected side until it stops.

5.Place an empty server under the funnel.

6.The ON/OFF (Enable Brew) switch for the selected side must be ON. Select the desired batch size.

7.Momentarily press and release the BREW button. There may be

certain situations in which the brew cycle will not begin when BREW is pressed:

a.SWITCH NOT ON - ON/OFF must be ON.

b.BREW TEMPERATURE TOO LOW - wait until heated or cancel BREW LOCKOUT option.

c.CHECK FUNNEL - remove funnel, empty previously brewed grounds and replace with fresh.

d.DISABLED - select different brew button or batch size.

8.If none of the above messages are displayed, the display will read NOW BREWING and show the time remain- ing in the brew cycle.

9.Following the brew will be a countdown of drip time DRIPPING which shows the time remaining until the coffee no longer drips from the funnel tip.

10.Carefully remove the brew funnel and discard the grounds and filter only after visible dripping stops.

Page 8

40119 010412

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Titan Dual Phone 217 529-6601 FAX 217Introduction #00658.0000 User Notices#00986.0000 400/230V volt ac three phase 50/60 Hz models Electrical RequirementsCE Requirements Plumbing RequirementsPlumbing Hook UP Tank DrainOperating Controls Programming leftTemperature Selection Procedure for setting the Set TempInitial SET-UP SET Temp Range 185˚F 85˚C to 205˚F 96˚CReady Temp Range 2 to 20 F 2 to 10 C Procedure to set ready temperatureCoffee Brewing Cleaning Viewing Asset & Serial Number

40119.0000G specifications

The Bunn 40119.0000G is a high-performance commercial coffee maker designed to meet the rigorous demands of the food service industry. Known for its reliability and efficiency, this machine is ideal for restaurants, cafés, and coffee shops looking to serve large volumes of quality coffee without sacrificing taste or speed.

One of the standout features of the Bunn 40119.0000G is its ability to brew multiple pots of coffee in quick succession. With a capacity to brew up to 3.8 gallons per hour, it is equipped with a unique brewing system that ensures optimal extraction and flavor. This makes it perfect for busy environments where time is of the essence. The machine utilizes a patented "internally plumbed" brewing system, which means it is directly connected to a water source, allowing for an uninterrupted brewing process.

Another notable characteristic of the Bunn 40119.0000G is its stainless steel construction, providing durability and a sleek appearance that fits well in any commercial setting. The materials used in its design not only contribute to its longevity but also make it easy to clean and maintain. The machine is designed for efficient operation, with hot water capabilities that allow for steaming or hot water dispensing for other beverages.

The digital temperature control is one of the advanced technologies incorporated into the Bunn 40119.0000G. This feature allows users to adjust brewing temperatures to suit different coffee types, ensuring each brew reaches its full flavor potential. Additionally, it comes with a brew counter, offering operators the ability to monitor usage and maintain consistent quality.

Safety and convenience are also integral to the design of the Bunn 40119.0000G. It includes features such as an automatic shut-off mechanism and an integrated drip tray to manage spills and overflow effectively. The machine's footprint is compact enough to fit in various kitchen layouts, making it a versatile option for establishments with limited space.

In summary, the Bunn 40119.0000G combines high capacity brewing, robust construction, advanced technology, and user-friendly features to deliver exceptional performance. Its ability to produce consistent, high-quality coffee quickly makes it a favored choice among coffee professionals looking to elevate their coffee service while maintaining efficiency and quality.
Top Page Image Contents