Bunn 40119.0000G Initial SET-UP, Temperature Selection, SET Temp Range 185˚F 85˚C to 205˚F 96˚C

Page 7

INITIAL SET-UP

CAUTION – The brewer must be disconnected from the power source throughout the initial setup, except when specified in the instructions.

1. Insert an empty funnel into the funnel rails of one of the brew stations.

2. Place an empty server under the funnel.

3. Connect the brewer to the power source. Make sure the corresponding ON/OFF switch is ON (LED will be lit).

4. Water will flow into the tank and stop when the tank is filled to its capacity. Display will show PLEASE WAIT...TANK FILLING until tank is filled with water.

5. Wait approximately twenty-five minutes for the water in the tank to heat to the proper temperature. Display will show READY TO BREW...WATER TEMP: 205° when tank is at operating temperature. Some water may drip from the fun- nels during this time; this is due to expansion and should not occur thereafter.

NOTE: Brew water temperature is factory set at 205° F (96.1° C). Refer to TEMPERATURE SELECTION below should the water temperature need to be increased or decreased. When brew water temperature is changed, ready temperature will need to be increased or decreased also.

6.Place a small vessel beneath the faucet and open the faucet handle. Release it when you hear the tank refilling.

7.Water volumes and flow settings have been preset at the factory. Refer to adjustments for the Set Brew Volumes or Calibrate Flow section of the Programming Manual on the Bunn-O-Matic website, at www.bunn. com should the volume need to be increased or decreased.

8.The brewer is now ready for use in accordance with the instructions for Coffee Brewing.

TEMPERATURE SELECTION

SET TEMP - Range: 185˚F (85˚C) to 205˚F (96˚C)

This function allows the operator to set the brew water temperature in the tank. It also sets the hot water faucet dispense temperature.

SET TEMP: XXX° (-) DONE (+)

Procedure for setting the Set Temp:

1.Press and hold the right hidden switch until the display reads SET LANGUAGE. Press and release the right hidden switch until the display reads SET TEMP: XXX°.

2.Using (-)and (+), adjust the brew and faucet temperature.

3.When finished, press DONE to save the new setting and to advance to the next function screen, READY TEMP: XXX°. Press and release the ON/OFF switch (either on DUAL brewers) to exit programming and return to the MAIN SCREEN.

Page 7

440119 010412

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Phone 217 529-6601 FAX 217 Titan DualIntroduction #00986.0000 User Notices#00658.0000 Electrical Requirements 400/230V volt ac three phase 50/60 Hz modelsTank Drain CE RequirementsPlumbing Requirements Plumbing Hook UPProgramming left Operating ControlsSET Temp Range 185˚F 85˚C to 205˚F 96˚C Temperature SelectionProcedure for setting the Set Temp Initial SET-UPCoffee Brewing Procedure to set ready temperatureReady Temp Range 2 to 20 F 2 to 10 C Viewing Asset & Serial Number Cleaning

40119.0000G specifications

The Bunn 40119.0000G is a high-performance commercial coffee maker designed to meet the rigorous demands of the food service industry. Known for its reliability and efficiency, this machine is ideal for restaurants, cafés, and coffee shops looking to serve large volumes of quality coffee without sacrificing taste or speed.

One of the standout features of the Bunn 40119.0000G is its ability to brew multiple pots of coffee in quick succession. With a capacity to brew up to 3.8 gallons per hour, it is equipped with a unique brewing system that ensures optimal extraction and flavor. This makes it perfect for busy environments where time is of the essence. The machine utilizes a patented "internally plumbed" brewing system, which means it is directly connected to a water source, allowing for an uninterrupted brewing process.

Another notable characteristic of the Bunn 40119.0000G is its stainless steel construction, providing durability and a sleek appearance that fits well in any commercial setting. The materials used in its design not only contribute to its longevity but also make it easy to clean and maintain. The machine is designed for efficient operation, with hot water capabilities that allow for steaming or hot water dispensing for other beverages.

The digital temperature control is one of the advanced technologies incorporated into the Bunn 40119.0000G. This feature allows users to adjust brewing temperatures to suit different coffee types, ensuring each brew reaches its full flavor potential. Additionally, it comes with a brew counter, offering operators the ability to monitor usage and maintain consistent quality.

Safety and convenience are also integral to the design of the Bunn 40119.0000G. It includes features such as an automatic shut-off mechanism and an integrated drip tray to manage spills and overflow effectively. The machine's footprint is compact enough to fit in various kitchen layouts, making it a versatile option for establishments with limited space.

In summary, the Bunn 40119.0000G combines high capacity brewing, robust construction, advanced technology, and user-friendly features to deliver exceptional performance. Its ability to produce consistent, high-quality coffee quickly makes it a favored choice among coffee professionals looking to elevate their coffee service while maintaining efficiency and quality.
Top Page Image Contents