Bunn A10 specifications Routine Cleaning, Handle Maintenance, Deliming, Water Quality

Page 12

ROUTINE CLEANING

Rinsing the brew funnel and decanter after each use is the only routine cleaning required. Occasionally, wipe the outside of the brewer including the area above the funnel with a damp cloth. (The brew funnel, hot water funnel and decanter are top rack dishwasher safe.)

HANDLE MAINTENANCE

P2083

Using a phillips screw driver, periodically tighten the screw in the handle.

DELIMING

Periodically, you should delime the brewer to clear any deposits that may have accumulated due to impurities in the water source.

1)

Unscrew the sprayhead with your fingertips and set

 

 

it aside.

 

2)

Insert all but two inches of the flexible deliming spring

 

 

probe (supplied) through the sprayhead opening.

 

3)

Slide the tool in and out five or six times to loosen

 

 

mineral deposits collected in the sprayhead tube.

P2084

 

 

 

Remove it and set it aside.

 

4)

Check the holes in the sprayhead for mineral deposits.

 

 

These may be cleared by using a toothpick. Rinse the

 

 

sprayhead with water before reinstalling.

 

5)

Plug in the brewer and allow the water in the tank

 

 

to reheat before using the brewer. The frequency

 

 

of deliming depends on the mineral content of your

 

 

water.

P2085

 

 

SOFTENED WATER and/or DECAFFEINATED COFFEE

Bunn® coffee brewers will brew a perfect decanter of coffee when used with unsoftened tap water and regular coffee. If there’s a noticeable difference when us- ing softened water and/or decaffeinated coffee, telephone or write us to request a special sprayhead and use a coarser grind of coffee.

WATER QUALITY

Install a water conditioner if your water contains excessive amounts of sediment, taste, or odors.

12

43422.1 010311

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents A10 A10-A BUNN-O-MATIC Commercial Product Warranty Table of Contents SpecificationsIntroduction User NoticesImportant Safeguards General Information Hazardous Voltage Electrical Requirements Set-UpPreparing the Brewer for USE ALL Models Raise the hinged flip lidBrewing Delicious Coffee Timer Setting Automatics only Coffee Fundamentals Brewing TipsHOT Water Routine Cleaning Handle MaintenanceDeliming Water QualityAuthorized Service Draining the BrewerHigh Altitude USE Bunn Companion Products NCD DecantersSchematic Wiring Diagram

A10 specifications

The Bunn A10 is a high-performance coffee brewer designed to meet the demands of commercial establishments. Renowned for its reliability, efficiency, and quality brewing, it is a popular choice among coffee shops, restaurants, and other venues that serve high volumes of coffee.

One of the standout features of the Bunn A10 is its large capacity. With the ability to brew up to 10 gallons of coffee per hour, it is well-suited for busy environments where speed and volume are essential. The machine also includes a large 3.8-liter stainless steel water tank, ensuring that hot water is always ready for brewing, which greatly reduces wait times and enhances service efficiency.

The Bunn A10 employs an advanced spray head technology for optimal coffee extraction. The specially designed showerhead delivers water evenly over the coffee grounds, promoting uniform saturation and ensuring that the full flavor profile of the coffee is achieved. This technology helps coffee shops maintain consistent quality, a key factor for customer satisfaction.

In terms of user-friendliness, the Bunn A10 features an intuitive control panel, making it easy for staff to operate. The machine is designed for simplicity, with straightforward programming options that allow users to adjust brew times and temperatures to create the perfect cup of coffee. Additionally, the unit is constructed for durability with stainless steel components that can withstand the rigors of daily use.

Another key characteristic of the Bunn A10 is its energy-efficient design. The machine is equipped with a hot water tank that is constantly maintained at an optimal temperature, minimizing energy waste while ensuring that it is always ready to brew. This is particularly beneficial for high-demand settings, as it reduces downtime and ensures a steady supply of freshly brewed coffee.

Maintenance is also a significant consideration in the Bunn A10's design. The machine features a self-diagnostic system that helps predict maintenance needs before they become an issue. This proactive approach not only maximizes uptime but also extends the machine's lifespan.

In summary, the Bunn A10 coffee brewer is a robust and efficient choice for any commercial setting. Its ability to produce large quantities of high-quality coffee quickly, combined with user-friendly features and advanced brewing technology, makes it a top choice for businesses focused on delivering exceptional coffee experiences.
Top Page Image Contents