Bunn A10 specifications BUNN-O-MATIC Commercial Product Warranty

Page 2

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1)Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor.

2)All other equipment - 2 years parts and 1 year labor plus added warranties as specified below:

a)Electronic circuit and/or control boards - parts and labor for 3 years.

b)Compressors on refrigeration equipment - 5 years parts and 1 year labor.

c)Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manu- factured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use in- cluding but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at

(217)529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional war- ranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge re- placement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

392, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Bev- erage Equipment Worldwide, ThermoFresh, Titan, trifecta, Velocity Brew, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

2

43422.1 030912

 

Image 2
Contents A10 A10-A BUNN-O-MATIC Commercial Product Warranty Introduction Table of ContentsSpecifications User NoticesImportant Safeguards General Information Hazardous Voltage Electrical Requirements Set-UpPreparing the Brewer for USE ALL Models Raise the hinged flip lidBrewing Delicious Coffee Timer Setting Automatics only HOT Water Coffee FundamentalsBrewing Tips Deliming Routine CleaningHandle Maintenance Water QualityHigh Altitude USE Authorized ServiceDraining the Brewer Bunn Companion Products NCD DecantersSchematic Wiring Diagram

A10 specifications

The Bunn A10 is a high-performance coffee brewer designed to meet the demands of commercial establishments. Renowned for its reliability, efficiency, and quality brewing, it is a popular choice among coffee shops, restaurants, and other venues that serve high volumes of coffee.

One of the standout features of the Bunn A10 is its large capacity. With the ability to brew up to 10 gallons of coffee per hour, it is well-suited for busy environments where speed and volume are essential. The machine also includes a large 3.8-liter stainless steel water tank, ensuring that hot water is always ready for brewing, which greatly reduces wait times and enhances service efficiency.

The Bunn A10 employs an advanced spray head technology for optimal coffee extraction. The specially designed showerhead delivers water evenly over the coffee grounds, promoting uniform saturation and ensuring that the full flavor profile of the coffee is achieved. This technology helps coffee shops maintain consistent quality, a key factor for customer satisfaction.

In terms of user-friendliness, the Bunn A10 features an intuitive control panel, making it easy for staff to operate. The machine is designed for simplicity, with straightforward programming options that allow users to adjust brew times and temperatures to create the perfect cup of coffee. Additionally, the unit is constructed for durability with stainless steel components that can withstand the rigors of daily use.

Another key characteristic of the Bunn A10 is its energy-efficient design. The machine is equipped with a hot water tank that is constantly maintained at an optimal temperature, minimizing energy waste while ensuring that it is always ready to brew. This is particularly beneficial for high-demand settings, as it reduces downtime and ensures a steady supply of freshly brewed coffee.

Maintenance is also a significant consideration in the Bunn A10's design. The machine features a self-diagnostic system that helps predict maintenance needs before they become an issue. This proactive approach not only maximizes uptime but also extends the machine's lifespan.

In summary, the Bunn A10 coffee brewer is a robust and efficient choice for any commercial setting. Its ability to produce large quantities of high-quality coffee quickly, combined with user-friendly features and advanced brewing technology, makes it a top choice for businesses focused on delivering exceptional coffee experiences.