General Information

NOTE - THE BREWER IS NOT READY TO PLUG IN

Improper installation will result in permanent damage and void the war- ranty. Read & follow the instructions on the next page.

•Be certain the tank is full of water before plugging in the brewer. (Requires at least three quarts to fill).

•This brewer is designed to remain plugged in at all times (except during initial installation or when cleaning.)

•A power switch is provided on the lower left side to completely shut off all elec- trical components when your plans take you away from home for several days. Safety features, designed into the Bunn® Pour-Omatic®coffee brewer, make the daily use of this switch unnecessary.

•Whenever the brewer has been shut off or unplugged, allow the water in the tank to heat to the proper temperature before using (about fifteen minutes or until the heating sound stops).

•Your Bunn® Pour-Omatic®coffee brewer has a specially designed tank to keep the water at the proper temperature. This constant supply of hot water assures the correct method of brewing coffee, in less than three minutes.

•The brewed coffee flows into the decanter where it is kept at serving temperature on the porcelain decanter warmer. The warmer is controlled by the lighted on/off switch on the front of the brewer.

NOTE - The warmer switch only controls the decanter warmer.

•While coffee is being brewed, the newest water in the tank is heated to the proper temperature and held until needed.

•The decanter lid reduces coffee evaporation and temperature loss.

•Hot water, approximately 50˚ F hotter than that available from your hot water faucet, is always available for other uses.

•This brewer has an attached, polarized cordset and requires 2-wire grounded service rated 120 volts ac, 120 amps, single phase, 60 Hz. Do not attempt to bypass the safety aspect of this polarized plug.

•The sprayhead will periodically become loose. Using extreme caution not to burn yourself, retighten the sprayhead with your finger tips.

NOTE - A severe burn may result if the sprayhead becomes loose and falls off while brewing.

5	43422.1 010311

A10 specifications

The Bunn A10 is a high-performance coffee brewer designed to meet the demands of commercial establishments. Renowned for its reliability, efficiency, and quality brewing, it is a popular choice among coffee shops, restaurants, and other venues that serve high volumes of coffee.

One of the standout features of the Bunn A10 is its large capacity. With the ability to brew up to 10 gallons of coffee per hour, it is well-suited for busy environments where speed and volume are essential. The machine also includes a large 3.8-liter stainless steel water tank, ensuring that hot water is always ready for brewing, which greatly reduces wait times and enhances service efficiency.

The Bunn A10 employs an advanced spray head technology for optimal coffee extraction. The specially designed showerhead delivers water evenly over the coffee grounds, promoting uniform saturation and ensuring that the full flavor profile of the coffee is achieved. This technology helps coffee shops maintain consistent quality, a key factor for customer satisfaction.

In terms of user-friendliness, the Bunn A10 features an intuitive control panel, making it easy for staff to operate. The machine is designed for simplicity, with straightforward programming options that allow users to adjust brew times and temperatures to create the perfect cup of coffee. Additionally, the unit is constructed for durability with stainless steel components that can withstand the rigors of daily use.

Another key characteristic of the Bunn A10 is its energy-efficient design. The machine is equipped with a hot water tank that is constantly maintained at an optimal temperature, minimizing energy waste while ensuring that it is always ready to brew. This is particularly beneficial for high-demand settings, as it reduces downtime and ensures a steady supply of freshly brewed coffee.

Maintenance is also a significant consideration in the Bunn A10's design. The machine features a self-diagnostic system that helps predict maintenance needs before they become an issue. This proactive approach not only maximizes uptime but also extends the machine's lifespan.

In summary, the Bunn A10 coffee brewer is a robust and efficient choice for any commercial setting. Its ability to produce large quantities of high-quality coffee quickly, combined with user-friendly features and advanced brewing technology, makes it a top choice for businesses focused on delivering exceptional coffee experiences.