Coffee Brewing, Cleaning | Bunn 37614 041410 specification

COFFEE BREWING

1.Select the desired batch size on the grinder. It is not necessary to select a size on the brewer.

2.Insert a BUNN filter into the funnel.

3.Pour the proper amount of fresh ground coffee into the filter and level the grounds by gently shaking.

4.Slide the funnel into the funnel rails. If the grounds are not obtained through a grinder compatible with a Smart Funnel, a batch size must be chosen on the brewer.

5.Place an empty server under the funnel.

6The ENABLE BREW switch must be ON. Momentarily press and release the BREW switch. If the brewer has the funnel lock option and if it is activated, once a brew cycle has been started the funnel is locked in place. There may be certain situations in which the brew cycle will not begin when the BREW switch is pressed:

a)BREW TEMPERATURE TOO LOW - wait until heated or cancel BREW LOCKOUT option.

b)FUNNEL NOT IN PLACE (or using a standard brew funnel) - cancel FUNNEL DETECT option.

c)CHECK FUNNEL - remove funnel, empty previously brewed grounds and grind a new batch into the funnel.

7.If none of the above messages are displayed, the display will read NOW BREWING and the time remaining in the brew cycle. Arrows will point to the side which is brewing. If both sides are brewing simultaneously, the arrows will alternate from left to right on the display.

8.Following the BREW will be a countdown of drip time DRIPPING which shows the time remaining until the funnel lock will release. Discard the grounds and filter only after visible dripping stops.

CLEANING

1.The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic equipment.

2.Check and clean the sprayhead. Use the pointed end of sprayhead cleaning tool (#38227.0000) to remove any mineral deposits from the sprayhead holes.

3.Insert the long end of sprayhead cleaning tool into the sprayhead fitting, and rotate several times to remove any mineral deposits from the fitting.

4.Insert the short end of sprayhead cleaning tool into the bypass fitting, and rotate several times to remove any mineral deposits from the fitting.

NOTE: In hard water areas, this may need to be done daily. It will help prevent liming problems in the brewer and takes less than a minute.

Page 7	37614 080108

37614 041410 specifications

The Bunn 37614 041410 is a remarkable commercial coffee brewer, designed for high-volume environments such as restaurants, cafes, and offices. Known for its reliability and efficiency, this model stands out in the busy coffee service industry.

One of the main features of the Bunn 37614 041410 is its ability to brew large quantities of coffee quickly. This machine offers a brewing capacity of up to 3.8 gallons per hour, which is essential for establishments that serve a high number of customers within a short period. The brewer is capable of producing full and half batches, allowing for flexible operations depending on the demand throughout the day.

The Bunn 37614 041410 is equipped with advanced brewing technology that ensures optimal extraction of coffee flavors. Its unique spray head design evenly distributes water over the coffee grounds, facilitating optimal saturation and extraction process. This means that every cup served is full of rich, flavorful coffee, enhancing customer satisfaction.

Another key characteristic of this brewer is its user-friendly interface. The machine features simple controls that allow staff to start the brewing process with minimal training. The clear instructions and straightforward design streamline operations, making it easy for busy baristas to keep up with demand.

In addition to its brewing capabilities, the Bunn 37614 041410 comes with a built-in stainless steel water tank that maintains the ideal brewing temperature. This ensures that coffee is brewed at the right temperature for optimal flavor extraction, providing consistency across every batch.

Moreover, this model is constructed with durability in mind, featuring a robust stainless steel body that withstands the rigors of daily use. Its sleek design also makes it an appealing addition to any coffee service station.

Maintenance is made easy with the Bunn 37614 041410, as it allows for easy access to its internal components for cleaning and servicing. The machine's design minimizes the risk of clogs and malfunctions, ensuring that it remains in optimal working condition for years to come.

In summary, the Bunn 37614 041410 is a powerful coffee brewer that combines efficiency, durability, and excellent brewing technology. Its ability to produce large volumes of high-quality coffee quickly makes it an invaluable tool for any coffee-forward business.