Extron electronic MGP 464 HD-SDI manual Saving creating a window preset, Input Presets

PRELIMINARY

HTML Configuration and Control, cont’d

Saving (creating) a window preset

To save all the current window settings as a preset,

1.	From the Select Preset menu, select the preset number to which you want to
	save the current settings for all the windows.
2.	Click Save Preset.

Recalling a window preset

To recall a saved preset and enable all its settings,

1.	From the Select Preset menu, select the name of the preset that you want to
	recall.
2.	If you want to recall all window settings contained in the selected preset,
	including the input displayed when the preset was saved, click Recall Preset
	with Input.

If you do not want to recall the inputs for the selected preset, click Recall

Preset.

Selecting a window preset transition effect

In the Window Preset Effect section, you can select either a cut or a slide transition effect with which windows will be resized and/or repositioned when a new preset is selected.

•Cut effect — The window immediately moves to the location specified for it in the new preset, and is instantly resized.

•Real time motion effect — The window appears to slide to its new position and is resized slowly enough for its progress to be observed.

Follow these steps to specify a window transition effect between presets:

1. From the Window Effect menu, select Real time motion or Cut.

2. From the Effect Duration menu, select the amount of seconds the MGP will take to complete the transition to its new size and location.

NEffect Duration applies only if the Real time motion effect was selected. N The duration set here is the same value as the Window Effect duration.

Input Presets

An input preset is a file containing settings such as the signal type, image control settings, and window text for the input that is currently displayed in a selected window. The MGP 464 has 128 memory preset locations to which you can save settings as input presets.

The following settings are contained in the input presets:

Input Type	Horizontal Start	Total Pixels
Input Name	Vertical Start	Active Pixels
Film Mode On/Off	Pixel Phase	Active Lines
Brightness	Contrast	Color
Tint	Detail (sharpness)	Percentage of window filled*

*Image size and position are saved as a percent of the window, so that the input preset can be used for any size window.

5-22 MGP 464 • HTML Configuration and Control