Extron electronic MGP 464 HD-SDI manual = Secam

Software Configuration and Control, cont’d

PRELIMINARY

X50& = Picture adjustment range

(0 - 127; default = 64)

X50* = Scaler resolution

1 = 640 x 480

2 = 800 x 600

3 = 852 x 480

4 = 1024 x 768

5 = 1024 x 852

6 = 1024 x 1024

7 = 1280 x 768

8 = 1280 x 1024

9 = 1360 x 765

10 = 1365 x 768

11 = 1366 x 768

12 = 1365 x 1024

13 = 1400 x 1050

14 = 1600 x 1200

15 = 480p

16 = 576p

17 = 720p

18 = 1080i

19 = 1080p

20 = DVI background input resolution

X50( = Detected input signal standard 0 = None

1 = NTSC

2 = PAL

4 = SECAM

–= Not applicable (occurs when input is set for RGB or YUV)

X51) = Sharpness (detail) level (0 through 127)

X51! = Window transition effect type 1 = Cut

2 = Dissolve

3 = Soft wipe up

4 = Soft wipe down

5 = Soft wipe right

6 = Soft wipe left

7 = Soft wipe center in

8 = Soft wipe center out

9 = Soft wipe square in

10 = Soft wipe square out

11 = Soft wipe curtain in

12 = Soft wipe curtain out

13 = Hard wipe up

14 = Hard wipe down

15 = Hard wipe right

16 = Hard wipe left

17 = Hard wipe center in

18 = Hard wipe center out

19 = Hard wipe square in

20 = Hard wipe square out

21 = Hard wipe curtain in

22 = Hard wipe curtain out

X51@ = Blanking adjustment range (0 through 255; default is 128.)

X51# = Window preset (1 through 128)

X51$ = Input preset (1 through 128)

X51% = Scaler refresh rate

1 = 50 Hz

2 = 60 Hz

3 = 72 Hz

4 = 96 Hz

5 = 100 Hz

6 = 120 Hz

7 = DVI background input refresh rate

X51^ = Pixel phase (0-31)

X51& = Advanced picture settings value

(Range is the auto-sensed value ±512 lines or pixels.)

X51* = Window dissolve speed; 0 to 5 seconds in

0.1second increments (e.g., 01 = 0.1 second;

50 = 5.0 seconds)

X51( = Internal temperature in degrees Fahrenheit

X52) = Text string of up to 200 characters. Permitted characters include letters A-Z, digits 0-9, and the minus sign (–). No blank or space characters are permitted as part of a name. No distinction is made between upper- and lowercase letters. The first character must be a letter. The last character cannot be a minus sign.

X52! = Image/Window shift value (Zero location is 2048, and limits are ± the output resolution.)

Example: Front panel displays +50, but the response to the SIS command is 2098.

X52@ = Window size. The minimum size is 1/16 the size of the output active area. The maximum size is the active output area.

X52# = Image size. The minimum size is 1/16 the size of the input active area. The maximum size is double the active output area for 200% zoom.

X52$ = Window preset effect

0 = Cut

1 = Real time motion

NRecalling a window preset with the windows in new positions causes the windows to move to the new location and resize in a fluid motion.

X52% = Red, green, or blue color value (0-255)

X52& = Window priority (1 through 4, where 1 is top priority and 4 is lowest priority)

4-8 MGP 464 • Software Configuration and Control