Installation and Operation

Mounting the Tx/Rx

CInstallation and service must be performed by authorized personnel only.

Non-Decora unit mounting

The 1" high, quarter rack width HDMI 201 (non-Decora) transmitters and receivers can be placed on a tabletop, mounted on a rack shelf, or mounted under a desk or tabletop. The receiver can be mounted on a projector bracket.

Tabletop placement

Affix the four included rubber feet to the bottom of the unit and place it in any convenient location.

Rack mounting

UL guidelines

The following Underwriters Laboratories (UL) guidelines pertain to the installation of the transmitter or receiver into or onto a rack (figure 2-1).

1. Elevated operating ambient — If the equipment is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consider installing the equipment in an environment compatible with the +122 °F (+50 °C) maximum ambient temperature (Tma) specified by Extron.

2. Reduced air flow — Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

3. Mechanical loading — Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit overloading — Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5. Reliable earthing (grounding) — Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (such as the use of power strips).

VersaTools Rack Shelf

1/4 Rack Width Front

False Faceplate

Use 2 mounting holes on

opposite corners.

(2) 4-40 x 3/16" Screws

Figure 2-1 — Mounting the transmitter or receiver unit on a VersaTools rack shelf

Rack mounting instructions

For optional rack mounting, mount the transmitter or receiver on any of the following rack shelves:

•RSF 123 3.5" deep 1U VersaTools® rack shelf kit (part #60-190-20) (figure 2-1)

•RSB 123 3.5" deep 1U VersaTools rack shelf (part #60-604-20)

•RSU 126 6" deep 1U universal rack shelf kit (part #60-190-10)

•RSB 126 6" deep 1U basic rack shelf (part #60-604-10)

•RSU 129 9.5" deep 1U universal rack shelf kit (part #60-190-01) (figure 2-2on the next page)

•RSB 129 9.5" deep 1U basic rack shelf (part #60-604-01)

On the non-VersaTools rack shelves, the transmitter or receiver unit can be mounted in the front or the rear of the rack.

1. Remove the feet from the bottom of the transmitter or receiver unit, if they are installed.

2. Mount the transmitter or receiver unit using two 4-40 x 3/16" screws in opposite (diagonal) corners to secure the transmitter or receiver to the shelf.

3. Install false faceplate(s) or other unit(s) to the rack shelf.

2-2

HDMI 201 Tx/Rx • Installation and Operation

2-3

HDMI 201 Rx specifications

The Extron Electronics HDMI 201 Rx is a versatile and high-performing HDMI receiver designed for professional AV installations. This device is engineered to extend HDMI signals up to 230 feet (70 meters) using a single Cat 6a or better cable, ensuring that high-definition video and audio can be transmitted over long distances without compromising quality.

One of the standout features of the HDMI 201 Rx is its ability to support resolutions up to 4K at 30Hz, along with 1080p video at 60Hz. This makes it an excellent choice for environments where crisp, high-resolution visuals are critical, such as classrooms, conference rooms, and auditoriums. The receiver also supports various audio formats, including LPCM, Dolby Digital, and DTS, ensuring that users receive a comprehensive audio experience.

Another key technology employed in the HDMI 201 Rx is EDID (Extended Display Identification Data) management, which allows the receiver to communicate with connected displays to ensure optimal performance. This feature helps prevent compatibility issues and guarantees that the video output is tailored to the capabilities of the display device.

The HDMI 201 Rx also incorporates a unique feature known as HDBaseT technology, which enables the transfer of HDMI signals, Ethernet, and power over the same cable. This simplifies overall installation, reducing cable clutter and minimizing the number of required components. Additionally, the receiver includes built-in support for Power over Ethernet (PoE), allowing it to be powered through the same cable that carries the data signal, which can be a game-changer for ease of installation.

Integrators will appreciate the compact design and low-profile form factor of the HDMI 201 Rx, which allows for discreet integration into various environments. The unit is equipped with a set of LED indicators that provide real-time feedback on power, link status, and signal presence, helping installers monitor performance and troubleshoot effectively.

In conclusion, the Extron HDMI 201 Rx is a robust solution for extending HDMI signals over long distances while maintaining high-quality video and audio performance. With its support for 4K resolution, EDID management, HDBaseT technology, and PoE capabilities, it meets the demands of modern AV installations, making it a reliable choice for professionals in the industry.