Extron electronic HDMI 201 Rx user manual DC power input connector Plug the included external

Page 16

Installation and Operation, cont’d

HDMI 201 Tx Rear Panel

POWER

 

HDMI 201 Tx

12V

HDMI INPUT

RS-232

0.4A MAX

C

Input Audio — Plug an unbalanced stereo audio input into this

 

pair, left and right, of female RCA connectors (figure 2-14).

 

 

 

 

PASS THRU

 

 

1

2

Tx Rx

4

1

5

 

2

 

HDMI 201 A D Tx Rear Panel

 

 

Tip (Signal)

Sleeve (Gnd )

Right Channel (Red Jacket)

Left Channel (White Jacket)

Tip (+)

Sleeve ()

 

 

 

HDMI 201 A D Tx

 

 

 

 

2

 

 

 

 

O

 

 

 

 

 

U

 

 

 

 

 

T

 

 

 

 

5

P

 

DO NOT

L

 

 

U

 

CONNECT

AUDIO OUTPUT

 

 

T

 

TO LAN

6

 

S

 

 

 

 

 

 

 

 

 

 

R

 

 

 

1

 

POWER 12V MAX0.4A

4

 

 

 

 

 

 

 

 

 

Figure 2-13 — HDMI 201 Tx rear panel connectors

NThe RS-232 connector can also transmit one-way modulated infrared (IR) signals. See "Modulated IR pass through" on page 2-32.

 

Figure 2-14 — RCA connector wiring

D

DC power input connector — Plug the included external

 

12 VDC power supply into either this 2-pole connector or the

 

power input connector on the receiver (item Gon page 2-20).

 

See "Power supply wiring," on page 2-25, to wire the connector.

E

Transmitter output connector — Connect one end of two

 

separate TP cables to these RJ-45 female connectors on the

 

transmitter.

 

C Do not connect these devices to a computer data or

 

telecommunications network.

 

N Extron recommends 28AWG to 24AWG TP cable for the

 

RJ-45 connectors.

 

Connect the free ends of the same TP cables from the transmitter

 

to the receiver’s Input RJ-45 female connectors (item Hon

 

page 2-20).

 

N Connect transmitter output 1 to receiver input 1.

 

Connect transmitter output 2 to receiver input 2.

 

N If necessary, test for proper cable connection (output 1 to

 

input 1, output 2 to input 2) as follows:

 

1. Plug both TP cables into the powered unit.

 

2. Momentarily connect either of the cables on the

 

opposite end into the unpowered unit‘s “2” connector.

 

If the unpowered unit’s Power LED is lit, the

 

connection is correct.

 

If the unpowered unit’s Power LED is not lit,

 

unplug the connector on the unpowered end and

 

connect the other cable to the “2” connector.

 

See "TP cable termination," on page 2-22, to properly wire

 

the RJ-45 connectors.

2-16 HDMI 201 Tx/Rx • Installation and Operation

HDMI 201 Tx/Rx • Installation and Operation 2-17

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User’s Manual Digital Video Transmitter and ReceiverPrecautions Extron’s Warranty安全须知 中文 FCC Class a NoticeTable of Contents Table of Contents, cont’d Hdmi 201 Tx/RxIntroduction About this ManualAbout the Hdmi 201 Tx/Rx TransmitterFeatures Introduction, cont’dTP cable advantages Control communicationsTwo Mounting the Tx/Rx Installation and OperationNon-Decora unit mounting Under-furniture mounting Installation and Operation, cont’dThrough-furniture mounting Projector mounting PMK 300 mountingProjector pole on the inside PMK 350 mountingUL/safety guidelines Preparing the site and installing the wall boxDecora unit mounting Pass the legs through the holes in the L-shaped bracket10 Installing the wall box Cut out the material from the marked areaConnections Final installationTransmitter connections DC power input connector Plug the included external Transmitter output connector Connect one end of twoAudio Output connector Hdmi 201 a D Tx Decora only Fasten the wiresReceiver connections An Hdmi 201 a D Rx Decora receiver item KonDC power input connector Plug the included external Receiver input connector Connect one end of the twoEon page 2-17 to these RJ-45 female connectors Audio Input connector Hdmi 201 a D Rx Decora onlyPin assignments and wiring Hdmi connector pin assignmentsPin Signal TP cable terminationPower supply wiring Terminating shielded cableRS-232 connector wiring OperationHdmi Hdmi 201 a D Tx and Hdmi 201 a D Rx Front PanelTransmitter power indicator Receiver indicatorPower LED System operationApplication Examples Installation and Operation, cont’d TroubleshootingAudio conversion AAppendix a Modulated IR pass throughSpecifications Reference InformationControl/remote external device pass-through Reference Information, cont’dGeneral Mounting accessories Part NumbersTransmitter/receiver pair part numbers Included partsDecora Template Dimensions AdaptersHdmi female to DVI-D male adapter Hdmi male to DVI-D female adapter

HDMI 201 Rx specifications

The Extron Electronics HDMI 201 Rx is a versatile and high-performing HDMI receiver designed for professional AV installations. This device is engineered to extend HDMI signals up to 230 feet (70 meters) using a single Cat 6a or better cable, ensuring that high-definition video and audio can be transmitted over long distances without compromising quality.

One of the standout features of the HDMI 201 Rx is its ability to support resolutions up to 4K at 30Hz, along with 1080p video at 60Hz. This makes it an excellent choice for environments where crisp, high-resolution visuals are critical, such as classrooms, conference rooms, and auditoriums. The receiver also supports various audio formats, including LPCM, Dolby Digital, and DTS, ensuring that users receive a comprehensive audio experience.

Another key technology employed in the HDMI 201 Rx is EDID (Extended Display Identification Data) management, which allows the receiver to communicate with connected displays to ensure optimal performance. This feature helps prevent compatibility issues and guarantees that the video output is tailored to the capabilities of the display device.

The HDMI 201 Rx also incorporates a unique feature known as HDBaseT technology, which enables the transfer of HDMI signals, Ethernet, and power over the same cable. This simplifies overall installation, reducing cable clutter and minimizing the number of required components. Additionally, the receiver includes built-in support for Power over Ethernet (PoE), allowing it to be powered through the same cable that carries the data signal, which can be a game-changer for ease of installation.

Integrators will appreciate the compact design and low-profile form factor of the HDMI 201 Rx, which allows for discreet integration into various environments. The unit is equipped with a set of LED indicators that provide real-time feedback on power, link status, and signal presence, helping installers monitor performance and troubleshoot effectively.

In conclusion, the Extron HDMI 201 Rx is a robust solution for extending HDMI signals over long distances while maintaining high-quality video and audio performance. With its support for 4K resolution, EDID management, HDBaseT technology, and PoE capabilities, it meets the demands of modern AV installations, making it a reliable choice for professionals in the industry.
Top Page Image Contents