Rigging and Positioning

		9	8	7			6	5
1	Ð	Condenser			7	Ð	Burner Control Panel
2	Ð	Low-Stage Generator			8	Ð	Solution Heat Exchanger
3	Ð	Flue Stack			9	Ð	Chiller/Heater Control Panel
4	Ð	Separator			10	Ð	Absorber
5	Ð	High-Stage Generator			11	Ð	Evaporator

6 Ð Burner

Fig. 1 Ð Machine Components (Front View)

Rigging 2-Piece Units

Rigging procedures vary depending on whether the ma- chine is shipped in one or 2 pieces.

Lifting machine from points other than those speci®ed may result in serious damage and personal injury. Rig- ging equipment and procedure must be adequate for machine weights and sizes. Refer to Table 1 for machine weights, Fig. 2 and Tables 2 and 3 for overall dimensions.

Carefully position cables on machine to avoid damage to small piping, controls, or wiring.

Keep shell horizontal when lifting or lowering so all legs contact the ¯oor at the same time.

Rigging One-Piece Units Ð Lift entire assembly with cable hooks and shackles connected to the 3 lifting holes on the absorber-evaporator assembly (lower part of machine), and with the center balance point location, as shown in Fig. 3 and 4. Lifting from other holes or locations can dam- age the machine. See Mounting the Burner section for burner rigging instructions.

PREPARATION Ð Two-piece units must be prepared for installation before they can be rigged.

1.Open auxiliary evacuation valves to relieve pressure in absorber-evaporator shell.

2.Open shipping valve on generator assembly to relieve pressure.

3.Remove all piping end plates by ¯amecutting the end plate and weld ¯ange around their outer diameter. Cut these pieces as shown in Fig. 5 for proper reconnection.

4.Grind the cut pieces smooth for a close ®t when the ma- chine pieces are assembled.

To avoid contaminates and debris getting into chiller, do not leave machine open any longer than necessary.

Do not remove any stock from pipe ends. Do not get slag inside machine while ¯amecu<tting.

16DF013-050 specifications

The Carrier 16DF013-050 is an advanced air conditioning unit designed for superior performance and efficiency in residential and light commercial applications. Renowned for its reliable cooling capabilities, this model incorporates state-of-the-art technologies and features that enhance user comfort while minimizing energy consumption.

One of the standout characteristics of the Carrier 16DF013-050 is its high SEER (Seasonal Energy Efficiency Ratio) rating, which guarantees efficient cooling during the peak summer months. This unit is designed to operate at optimal efficiency, thereby reducing energy bills and providing substantial savings over time. Its innovative design minimizes energy use while delivering consistent comfort throughout the space.

The Carrier 16DF013-050 utilizes advanced scroll compressor technology, which ensures quiet operation and reduces vibrations, enhancing overall durability. This technology allows the unit to effectively modulate its cooling output according to demand, ensuring that the environment remains comfortable without wasting energy. Additionally, the unit is equipped with advanced diagnostics that make it easier for technicians to identify any maintenance issues promptly, reducing downtime and repair costs.

Another notable feature of this model is the inclusion of Carrier’s proprietary Infinity® control system, which provides users with the ability to manage their indoor climate through a user-friendly interface. The system enables remote control capabilities via smartphone apps, allowing for seamless integration into smart home systems. This means users can monitor and adjust their air conditioning settings even when they are not at home, ensuring optimal comfort at all times.

Durability is another hallmark of the Carrier 16DF013-050. The unit is built with high-quality materials that withstand harsh weather conditions, ensuring longevity and reliable operation. The cabinet is galvanized and powder-coated, providing an added layer of protection against rust and corrosion.

The Carrier 16DF013-050 is also designed with eco-conscious considerations in mind, utilizing R-410A refrigerant, which is less harmful to the environment compared to older refrigerants. This aligns with Carrier’s commitment to sustainability and energy efficiency.

In summary, the Carrier 16DF013-050 is an exemplary model in the realm of air conditioning systems. With its high efficiency, state-of-the-art compressor technology, advanced control options, and eco-friendly features, it offers an excellent solution for maintaining comfortable indoor climates while being mindful of energy consumption and environmental impact.