Breville BWC200 manual Troubleshooting

TROUBLESHOOTING				NOTES
Problem	POSSIBLE CAUSES		WHAT TO DO
LED indicator flashing	• Water Chiller is in Auto		Fan externally obstructed
& alternating between		Protection Mode	or an error with the internal
WHITE & BLUE			electronics.
			Unplug the unit & wait a
			few minutes to reset the
			unit.
			If problem persists call
			Breville Customer Service
			1300 139 798
Water does not flow	• Air lock in internal		With the chilling chamber
during initial flushing		tubing	full, move slider to the
			middle position and
			use the plug like a sink
			plunger while holding the
			dispensing paddle open to
			clear the air lock.
Flow rate of water slow	• Not enough water in		Ensure the water level is
		water tank	always above the MIN level
			for optimum flow rate.
Water tank has small	•	Brita filter cartridge	Immerse the filter cartridge
dark particles		& unit have not been	in cold water and agitate to
		flushed	remove air bubbles.
			Flush the unit twice before
			each new cartridge.
How can I clean the			Remove the plastic plug in
chilling chamber			the filter tank to clean the
			chilling chamber.
There is a flashing arrow	•	The Brita Filter	Brita Filter Cartridge
& no bars appearing on		cartridge may need	should be replaced every
the Brita Memo indicator		to be replaced	8 weeks.
What does the Brita Filter			The Brita Filter reduces
cartridge remove from			chlorine, metals such as
the water?			lead, copper, & limescale.
			Leaves in flouride.
Where can I purchase the			Brita filter cartidges are
Brita Filter cartridges			available at all leading
			retailers or contact Brita
			Consumer Service
			Ph: 1300 557 762

18 19