Mains Electricity Connection
CONTACT A QUALIFIED TECHNICIAN TO CARRY OUT THE APPLIANCE ELECTRICAL CONNECTION.
Important : Before connecting the drawer to the domestic power supply to check its operation, always make sure the drawer power cable is correctly fitted and NOT squashed or caught under or behind the drawer or a combined appliance.
Important : Power cable replacement must be made with a cable having the same characteristics as that supplied by the Manufacturer (type
Before connecting the appliance to the power supply, make sure that the technical specifications (voltage: V and
frequency: Hz) given on the rating plate match those of the power mains. In case of doubt, contact a qualified technician. If the plug is removed from the power cable, contact a qualified technician for fitting and connecting the appliance. Contact an electrician aware of the local regulations and the electricity company’s regulations, ensuring that the work is carried out in compliance with the same.
Important : Make sure the appliance is connected to an approved earth wire, to guarantee electrical safety. If necessary, have the system checked by a specialised technician.
The Manufacturer declines any liability for injury and damage due to the lack or interruption of the earth wire.
Important : The earth connection is compulsory by law.
•If the appliance is connected to the power supply by means of an extension cord, make sure the cord and connection are insulated against moisture.
•The appliance is designed to be used only when correctly fitted.
•Never open the appliance casing. In case of contact with live wires or if the electrical and mechanical structure of the appliance is modified, an appliance fault may occur when it is used.
•If the installation, maintenance or repair works are not carried out correctly, there may be risks for the user. The Manufacturer declines any liability for damage or injury in such cases.
•During the warranty period, repairs must only be carried out by the authorised technical service, otherwise the warranty will be invalidated.
•Installation, repair and cleaning operations must only be carried out after ensuring that the appliance is disconnected from the power supply. The appliance is disconnected from the power supply in the following cases:
-The main power switch is off.
-The safety switch is turned off.
-The appliance is unplugged.
•Grip the plug and not power cable to unplug the appliance.
•It is advisable to connect the appliance to the power supply by means of a socket; this will facilitate technical assistance operations, if necessary.
•Ensure that the socket is accessible even once the appliance has been fitted.
•If connection is not made by means of an electrical socket, contact an electrician aware of the local regulations and the electricity company’s regulations, ensuring that the work is carried out in compliance with the same.
•If the socket is no longer accessible after fitting the appliance or if a fixed connection is provided for, a separation device for each pole must be arranged by the installer.
•Switches with contact opening of at least 3mm are valid separation devices.
•The specifications necessary for connection are given on the dataplate. These specifications must match those of the power supply.
•The Manufacturer declines any liability for injury or damage due to incorrect installation, improper, wrong and unreasonable use of the appliance.
•The Manufacturer also declines any liability for damage (e.g. electric shock) caused by the lack or interruption of the earth wire.
•After installation, all the parts of the appliance must be insulated, to prevent accidents during operation.