CDA SVW140 manual Removing the Warming Drawer, Refitting the Warming Drawer

Page 6

Removing the Warming Drawer

•The drawer can be removed in order to clean the inside.

•Open the drawer fully (see pic. 1)

•Undo the 2 front screws (1 on each side) - (pic. 2)

•Lift the 2 hooks (1 on each side) - (pic. 3-4)

•Hold the front part of the drawer on both sides, because the rear part of the side guides has been lubricated.

•Remove the drawer by carefully lifting it upwards (pic.5) and put it down.

•The inside of the appliance can now be cleaned, using water and detergent.

•Do not place the drawer in water once it has been removed.

Refitting the Warming Drawer

•To refit the drawer, carry out the removal procedure in reverse order.

•To do this, place the drawer off the guides.

•NB : There is a fixing hook on the left and right side under the warming drawer.

•The drawer can be opened only if the fixing hook is in the correct position.

hook

hook

drawer

side guide

1

2

3

4

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SVW140 Warming Drawer Mains Electricity Connection Important The earth connection is compulsory by lawBefore using the appliance, remove Before Using the Warming DrawerInstallation MeasurementsOperation Using Your Warming DrawerSelecting the Temperature Warming TimesCare and Cleaning Front panelAntislip drawer base Removing the Warming Drawer Refitting the Warming DrawerIf the dishes are not warm enough, make sure Troubleshooting GuideCustomer Care Different factors affect the warming time, e.gDo not allow children to touch Safeguarding the Environment Disposal of packing materialDisposal of old electrical appliances Page Page Customer Care Department 01949 862
Top Page Image Contents