General Settings and Use
To programme the oven
Touch 
Touch 
or 
until the required programme shows on display. The oven function display will suggest which level to put the shelf according to the programme.
Touch 
to confirm. The oven will start cooking immediately.
Touch 
to activate temperature selection (to change from the preset temperature), touch 
or 
until the required temperature shows on display, then touch 
to confirm the temperature selection.
To set the cooking time (the cooking starts immediately, and finishes at a programmed time), touch 
to activate timer selection so the timer display shows 
, touch 
or 
until the required time shows on display, then touch 
to confirm the timer selection. Touch 
to start the programme.
To set a delayed programme (the cooking starts and finishes at a programmed time), touch 
twice to activate timer selection so the timer display shows 
and the time the programme is due to end (current time + cooking time), touch 
or 
until the required time shows on display, then touch 
to confirm the timer selection. The timer display will then show the set end time. Finally, Touch 
. When a delayed programme is set, the oven will go on to standby and 
will show on the display until the programme starts.
To cancel a programme, touch 
.
At the end of the programme, the oven will beep three times
The current time will show in the display one minute after the programme ends.
If the oven must be preheated, switch on the oven as above. Once the preheat is complete, the upper bars on the temperature indicator on the display 
will stay lit and the oven will beep three times, pause, and beep three times again.
6