CDA HCG 931 manual Gas Connection, Installation to Natural Gas, Installation to LP Gas

Page 14

14

Gas Connection

The installation of the gas appliance to Natural Gas or LP Gas must be carried out by a suitably qualified and registered installer. Installers shall take due account of the provisions of the relevant British Standards Code of Practice, the Gas Safety Regulations and the Building Standards (Scotland) (Consolidation) Regulations issued by the Scottish Development Department.

Installation to Natural Gas

Installation to Natural Gas must conform to the Code of Practice, etc.

The supply pressure for Natural Gas is 20 mbar.

The installation must conform to the relevant British Standards.

Installation to LP Gas

When operating on Butane gas a supply pressure of 28-30 mbar is required. When using Propane gas a supply pressure of 37 mbar is required.

The installation must conform to the relevant British Standards.

CDA are not legally able to provide any assistance in the installation of gas appliances except to suitably qualified and registered installers. Any suitably qualified and registered fitter requiring help must provide name, address and registration number.

Information supplied will be validated before help is provided.

Warning:

Only a suitably qualified and registered installer, also with technical knowledge of electricity should install the appliance. He should observe the Regulations and Codes of Practice governing such installation of gas appliances.

Note: It is recommended that the gas connection to the appliance is installed with a flexible connecting tube made to BS5386.

Notes:

Flexible hoses can be used where the sited ambient temperature of the hose does not exceed 70°C. These hoses must be manufactured in accordance with BS669 part 1 and be of the correct construction for the type of gas being used.

Gas hoses designed for natural gas MUST NOT be used for supplying LPG gas (LPG gas hoses can be identified by a either a red band or stripe on the rubber outer coating of the hose). The hose should not be crushed or trapped or be in contact with sharp or abrasive edges.

Image 14
Contents HCG 931 .. Built-in Cooking Hob Appliance information Declaration of CE conformityImportant Safeguards and Recommendations Before Using for the First TimeControl Panel Features and Technical DataCooking Points Lighting Gas Burners How to use the hobGas burners Choice of Burner Correct use of triple-ring burnerCleaning and Maintenance Burners and Grids Correct Position of Triple Ring Burner Location Ventilation RequirementsInstallation in Kitchen Cabinet with Door InstallationTechnical Information for the Installer Fastening the Installation Brackets fig Fastening the Hob figImportant Note Installation and Service Regulations United Kingdom OnlyGas supply requirements Gas Connection Installation to Natural GasInstallation to LP Gas Cylindrical Gas connectionConnection to the Gas Supply Is a leak, tighten the fittingTable for the Choice of the Injectors Cat II 2H 3+ Conversion to Natural Gas or LPGReplacing the Burner Injectors BurnersLubrication of the Gas Taps Regulating the Burner Minimum SettingFor LPG, tighten the adjustment screw completely Mains Electricity Connection Green & Yellow = Earth, Blue = Neutral, Brown = LiveLimit of Cover GuaranteeAppliance Servicing Contact telephone numbersCod /GB ß4

HCG 931 specifications

CDA HCG 931 is a sophisticated construction and demolition waste compactor that brings innovation and efficiency to the waste management sector. With its compact design and robust features, the HCG 931 is engineered to handle a variety of waste materials, ranging from concrete and bricks to wood and metals. This machine is particularly favored in recycling operations and construction sites where space is often limited but the need for effective waste compaction remains critical.

One of the standout features of the CDA HCG 931 is its impressive compaction ratio. Thanks to its advanced hydraulic system, the machine can achieve significant volume reduction, allowing operators to maximize the use of available space in waste containers. This efficiency not only increases the hauling capacity but also reduces transportation costs, making it a cost-effective solution for waste disposal.

The HCG 931 is equipped with a powerful diesel engine that provides a high level of performance, ensuring that it can tackle even the toughest waste materials. The machine's cutting-edge technology includes an intelligent control system that monitors performance metrics in real-time, allowing operators to adjust settings for optimal efficiency. The intuitive control panel is designed with usability in mind, simplifying the operation process and enabling workers to focus on the task at hand without being bogged down by complicated controls.

Durability is a key characteristic of the CDA HCG 931. Built with high-quality materials that can withstand harsh operating environments, this compactor is designed to endure the rigors of daily use on construction sites. Its reinforced chassis and heavy-duty components contribute to its reliability, reducing maintenance downtime and increasing the overall lifespan of the equipment.

Safety is also a primary concern in the design of the HCG 931. Equipped with safety features such as emergency stop buttons, overload protection, and visibility enhancements, this compactor ensures a safe working environment for all personnel involved in waste management.

In summary, the CDA HCG 931 compactor stands out due to its superior compaction capabilities, robust performance, durability, and user-friendly operation. It represents a significant advancement in waste management technology, making it an essential tool for modern construction and demolition projects. By integrating efficiency, safety, and reliability, the HCG 931 helps make waste disposal more effective and environmentally friendly.