CDA 6Q6, 6Z6, 6V6 manual Replacing the Halogen Oven Light, Top Right Lamp, Left Lamp

26

Replacing the Halogen Oven Light

WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

–Let the oven cavity and the heating elements to cool down;

–Switch off the electrical supply;

Top Right Lamp:

–Remove the protective cover C (fig. 8);

–Replace the halogen lamp B with a new one suitable for high temperatures having the following specifications: 230V and same power (check watt power as stamped in the lamp itself) of the replaced lamp.

IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from your fingers can cause premature failure. Always use a clean cloth or gloves.

–Refit the protective cover;

Left Lamp:

–Remove the left wire rack by unscrewing the fixing screws.

–Press down from the top the protective cover A (fig. 8) and remove it by rotating on the lower side. IMPORTANT: never use screwdrivers or other utensils to remove the cover A. This could damage the enamel of the oven or the lampholder. Operate only by hands.

–Replace the halogen lamp B with a new one suitable for high temperatures having the following specifications: 230V and same power (check watt power as stamped in the lamp itself) of the replaced lamp.

IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from your fingers can cause premature failure. Always use a clean cloth or gloves.

–Refit the protective cover A operating in reverse order.

ATTENTION: the notch in the inner edge of the cover must be oriented toward the lamp.

–Assemble the left wire rack.

Note: Oven bulb replacement is not covered by your guarantee.

WRONG

CORRECT

1

A

2 A B A B C

Fig. 8