Performance data sheet

PERFORMANCE DATA SHEET FOR MODELS WCH-1000 and WCH-1500

CONTAMINANT REMOVAL DATA IMPORTANT NOTICE:

Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs. It is recommended that, before purchasing a water treatment unit, you have your water supply tested to determine your actual water treatment needs.

Performance testing conducted by WQA. These systems have been tested according to NSF/ ANSI Standard 53 and 42 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for the water leaving the system, as specified in NSF/ANSI Standard 53 and Standard 42.

Testing was performed under standard laboratory conditions; actual performance may vary.

			Removal	Removal	Action Level	Hardness	Temp	Inlet

		Influent	Filter		Max.
	Influent	Influent	Filter	Percent	Permissible		Testing
Substance	Influent	Challenge	Effluent	Percent	Permissible	CaCO3	Testing		Reduction
	Water Avg.	Challenge	Effluent	Reduction	Product Water	CaCO3	Compart.	PH	Reduction
	Water Avg.	Concentration	Max.	Reduction	Product Water	(mg/L)	Compart.	PH	Requirement
	(mg/L)	(mg/L)	(mg/L)	(%)	Concentration		(°C)
		(mg/L)	(mg/L)		(mg/L)
					(mg/L)

NSF/ANSI Standard 42-Aesthetic Effects

Chlorine Taste and Odor Reduction

2.0

2.0+/-10%

N/A

97.5%

N.A.

7.53

>50

NSF/ANSI Standard 53-Health Effects

Copper pH 6.5	3.15	3.0+/-10%	.87	85.0%	1.3	16	20	6.42	N/A

Copper pH 8.5	3.10	3.0+/-10%	1.0	85.4%	1.3	120	19	8.42	N/A

Mercury pH 6.5	.006	0.006+/-10%	.0009	92.8%	0.002	22	19	6.45	N/A

Mercury pH 8.5	.006	0.006+/-10%	.001	89.9%	0.002	140	20	8.55	N/A

Cadmium pH 6.5	.029	0.03+/-10%	.002	96.6%	0.005	18	20	6.59	N/A

Cadmium pH 8.5	.03	0.03+/-10%	.004	92.5%	0.005	120	20	8.44	N/A

Benzene	.015	0.015+/-10%	.003	84.1%	0.005	130	20	7.58	N/A

Toluene	2.9	3.0+/-10%	.770	89.8%	1	320	20	7.54	N/A

Tetrachloroethylene	.014	0.015+/-10%	.003	92.5%	0.005	340	21	7.56	N/A

Lead pH 8.5	.149	.15+/-10%	.007	95.4%	.010	98	21	8.5	N/A

Lead pH 6.5	.154	.15+/-10%	.004	98.7%	.010	18	19	6.5	N/A