Electrical connection

Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below).

Fitting the power supply cable

1. Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover

(see diagram).

2. Install the power supply cable by

		loosening the cable
	L	clamp screw and the
	L	three wire contact
		three wire contact
		screws L-N- .
		Connect the wires to
		the corresponding
		terminals: the Blue wire
		to the terminal marked
		(N), the Brown wire to
	N	the terminal marked (L)
		and the Yellow/Green
		wire to the terminal

marked (see diagram).

3.Secure the cable by fastening the clamp screw.

4.Close the cover of the terminal board.

Connecting the electricity supply cable to the mains

Install a standardised plug corresponding to the load indicated on the data plate (see table).

The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3 mm installed between the appliance and the mains. The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.

The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations.

Before connecting the appliance to the power supply, make sure that:

•The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of	GB
the appliance, which is indicated on the data
plate (see below).

•The voltage is in the range between the values indicated on the data plate (see below).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

The cable must not be bent or compressed.

The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

The manufacturer declines any liability should these safety measures not be observed.

APPLIANCE SPECIFICATIONS

	Dimensions	width 43.4 cm
	Dimensions	height 39.5 cm
		depth 40.8 cm
	Volume	70 l
	Electrical	voltage: 220 - 240 V~ 50Hz
	Electrical	maximum power absorbed
	connections	maximum power absorbed
	connections	3400 W (see data plate)
		3400 W (see data plate)
		Directive 2002/40/EC on the
		label of electric ovens.
	ENERGY	Standard EN 50304
	ENERGY	Declared energy consumption
	LABEL	Declared energy consumption
	LABEL	for Forced convection Class –
		for Forced convection Class –
		heating mode:
		Gratin.
		This appliance conforms to the
		following European Economic
		Community directives:
		2006/95/EEC dated 12/12/06
		(Low Voltage) and subsequent
		amendments – 2004/108/EEC
		dated 15/12/04
		(Electromagnetic Compatibility)
		and subsequent amendments -
		93/68/EEC dated 22/07/93 and
		subsequent amendments.
		2002/96/EEC and subsequent
		amendments.
		1275/2008 stand-by/off mode.

OS 99D P IX specifications

The Ariston OS 99D P IX is a standout model in the realm of home appliances, particularly known for its innovative washing and drying capabilities. Tailored for modern households, it combines efficiency with user-friendly features, making laundry care an effortless task.

One of the key highlights of the Ariston OS 99D P IX is its impressive capacity. With a large drum size, this washing machine can handle substantial loads, accommodating the needs of families or individuals with busy lifestyles. This feature not only saves time by allowing for fewer loads but also contributes to energy efficiency by optimizing water and electricity usage.

Equipped with advanced technologies, the Ariston OS 99D P IX offers a variety of washing programs tailored for different fabric types and soil levels. Users can choose from programs designed specifically for cotton, synthetics, wool, and delicate items, ensuring that each wash is gentle yet effective. The machine also incorporates a quick wash option, which proves invaluable for those in a hurry, delivering fresh laundry in minimal time without compromising quality.

Energy efficiency is a fundamental characteristic of the OS 99D P IX. It boasts a high energy rating, which not only lowers electricity bills but also demonstrates a commitment to sustainability. This appliance operates quietly, making it suitable for any living environment, thus enhancing user experience without disturbing daily routines.

Another notable feature of the Ariston OS 99D P IX is its Smart Sensor technology. This innovation allows the machine to automatically weigh the laundry load and adjust the water and energy consumption accordingly. This intelligent feature maximizes efficiency, ensuring that each wash uses only the resources necessary for optimal cleaning.

User convenience is further enhanced by the intuitive digital display and control panel. The interface is designed for ease of use, allowing users to set their desired programs effortlessly. Additionally, the delay start function grants flexibility, enabling users to program washes to start at times that best fit their schedule.

The Ariston OS 99D P IX also features a durable build, incorporating high-quality materials that ensure longevity and reliability. With a modern aesthetic, it seamlessly integrates into any laundry space, marrying functionality with style.

In conclusion, the Ariston OS 99D P IX emerges as a versatile and efficient appliance, designed to meet the demands of contemporary households. With its range of features, advanced technologies, and user-centric elements, it stands out as an essential addition for anyone seeking to simplify their laundry care routine.