Anetsberger Brothers 14VFS warranty Ignite

Page 18

FRYER TROUBLESHOOTING GUIDE (Continued)

PROBLEM

CAUSE

REMEDY

 

 

 

Main burners do not

5. Gas control valve has failed.

5. Replace the gas control valve.

ignite. (Continued)

 

 

 

 

 

Main burners do not

1. Thermostat has failed.

1. Turn the thermostat control

stop burning.

 

knob to OFF. If the burners

 

 

do not quit burning, the ther-

 

 

mostat has failed and must

 

 

be replaced.

 

2. Gas control valve has failed.

2. Turn the gas control valve knob

 

 

to OFF. If the burners do not

 

 

quit burning, the gas control

 

 

valve has failed and must be

 

 

replaced.

 

 

 

Liquid shortening does

1. Low gas supply pressure [less than 6”W.C.

1. Measure the gas supply pres-

not reach the desired

for natural gas (11” W.C. for propane)

sure.

temperature for frying.

when all other gas-powered equipment is

Contact your local gas supplier

 

operating], causing reduced heat from main

to obtain adequate gas supply

 

burners.

volume and pressure.

 

2. Low gas manifold pressure [less than 3½ ”

2. Measure the gas pressure at

 

W.C.for natural gas (10” W.C. for pro-

the fryer’s manifold pressure

 

pane).

tap. Adjust the manifold pres-

 

 

sure (see Figure 6), as neces-

 

 

sary: [a] Unscrew (and re-

 

 

tain) the threaded Main Burner

 

 

Regulator Adjustment Cover.

 

 

[b] Use a flat-blade screw-

 

 

driver to turn the regulator

 

 

adjustment screw (clockwise to

 

 

increase; counterclockwise to

 

 

decrease) to reset the pressure

 

 

adjustment. [c] Reinstall, and

 

 

tighten the Regulator Adjust-

 

 

ment Cover, when finished.

 

3. Loose knob on thermostat; or thermostat

3. Stir the shortening to mix the

 

requires calibration (temperature setting

hot shortening with some from

 

differs by about 10°F from the measured

the lower ‘cool zone’ and allow

 

shortening temperature).

it to sit for 5 minutes. Turn the

 

 

thermostat knob until it ‘clicks’

 

 

on (causing the main burners to

 

 

flame); note the setting where

 

 

this occurs. Turn the thermo-

 

 

stat knob until it ‘clicks’ off

 

 

(causing the main burners to go

 

 

out); note the setting where this

 

 

occurs. Repeat this tempera-

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Installation User Operation Maintenance Manual Contents Fryer GAS Supply Specifications Shipping Container InspectionFryer Electrical Specifications Code RequirementsFryer Model 14VF/14VFS Site Installation Requirements Code RequirementsInstallation Requirements Fryer Restraining Device Installation InstructionsInstallation Requirements LEG Installation InstructionsLEG Leveling Instructions Caster Installation Instructions Caster Leveling INSTRUC- TionsGAS Connection Instructions Caster Leveling InstructionsFryer Operation Recommendations Fryer Operating Instructions Fryer Preparation for USELighting Procedure Shutdown ProcedureFryer Operating Instructions Frying Daily Cleaning Procedure Monthly Maintenance Instructions Fryer Troubleshooting Guide Problem Cause RemedyFryer Troubleshooting Guide Problem CauseIgnite Fryer Troubleshooting Guide Limited Warranty

14VFS, 14VF specifications

Anetsberger Brothers, a prominent name in the field of precision machining and fabrication, has made significant contributions to various industrial applications. Among their notable innovations are the 14VFS and 14VF models, which stand out for their remarkable features, advanced technologies, and exceptional performance.

The 14VFS model is engineered for versatility and efficiency, making it ideal for a wide range of manufacturing requirements. It boasts a robust design, ensuring durability while accommodating varied operational demands. One of its main features is the high-precision spindle, which allows for meticulous machining and tight tolerances. This is crucial in industries that require intricate components, as it ensures each part meets stringent quality standards.

In addition to its precision capabilities, the 14VFS integrates state-of-the-art CNC technology. This sophisticated control system enables users to program complex machining tasks easily, leading to increased productivity and reduced setup times. The user-friendly interface simplifies operation, making it accessible for both experienced machinists and newcomers alike.

On the other hand, the 14VF model emphasizes speed and performance. Equipped with powerful motors and a high-speed spindle, the 14VF is designed for rapid production cycles without compromising on quality. This model excels in high-volume manufacturing settings, delivering consistent results while minimizing downtime.

Both models feature advanced cooling systems that maintain optimal temperatures during operation, preventing overheating and extending the lifespan of the machinery. The Anetsberger Brothers’ commitment to innovation is evident in the incorporation of energy-efficient technologies, which not only reduce operational costs but also promote environmental sustainability.

Additionally, the machines are designed with user safety in mind. They include various safety features, such as emergency stop buttons and protective enclosures, ensuring a secure working environment.

Overall, the 14VFS and 14VF models from Anetsberger Brothers represent a blend of efficiency, precision, and safety. Their advanced technologies and thoughtful design make them invaluable assets in the manufacturing industry, catering to the needs of various sectors while ensuring optimum performance and reliability. These machines epitomize the company's dedication to delivering high-quality solutions for modern industrial challenges.
Top Page Image Contents