Daily Cleaning Procedure

FRYER OPERATING INSTRUCTIONS (Continued)

NOTE: Cleaning is recommended at the end of a workday to prepare the fryer for proper operation the next time it is to be used.

!	DANGER

Avoid moving the fryer while it contains HOT shortening. Drain the shortening from the fryer before moving it for service, clean- ing or maintenance to avoid spilling or splashing. [Refer to steps 1 through 7.] Burns from HOT shortening can cause se- rious injury or death.

1. Open the front door of the fryer. Attach the drain extension to the drain ball valve.

2. Perform the Shutdown Procedure. Ensure that the gas supply line inlet valve is closed (handle cross-wise to pipe line) and the pilot flame is extinguished.

3. Position a steel drum [NEVER use plastic!] with a filter cone directly beneath the drain extension end.

4. Slowly open the drain ball valve to drain the HOT shortening.

5. Remove the fryer baskets and screen from the kettle. Remove the basket hanger from the flue. Clean, and rinse, these items in the sink. MAKE SURE that these items are completely dry before their next use.

6. Clear any sediment blocking the kettle drain. Flush out all sediment in the bottom of the kettle by pouring filtered liquid shortening into the kettle until the shortening being drained runs clear.

7. Close the drain ball valve, after the kettle is completely empty of shortening and sedi- ment. Detach the drain extension. Clean, rinse, and dry it before storing.

DAILY CLEANING PROCEDURE

(Continued)

! WARNING

Wait until the kettle has cooled before performing step 8, to avoid injury from burns.

8. Thoroughly wipe the kettle interior using clean cloths.

9. Periodically perform the “BOIL OUT” Instructions to ensure thorough cleaning of the kettle. ( Refer to the earlier FRYER PREPARATION FOR USE section.)

10. Return the fryer to its normal operating loca- tion, if it was moved for cleaning, and recon- nect both the gas supply line and the move- ment-limiting cable. (For caster-equipped fryers, lock the locking casters to prevent movement.)

11. Refill the kettle with filtered (or fresh) liquid shortening to the desired indent mark on the rear wall of the kettle, only if fryer operation is to continue during a subsequent shift.

Otherwise, melt shortening into its liquid state and refill the kettle before fryer operation is scheduled during the next normal working shift.

12. Attach the basket hanger to the top of the backsplash panel. Return the screen and fryer baskets to their proper positions on the basket hanger.

13. Perform the Lighting Procedure to return the fryer to operation, when desired.

14VFS, 14VF specifications

Anetsberger Brothers, a prominent name in the field of precision machining and fabrication, has made significant contributions to various industrial applications. Among their notable innovations are the 14VFS and 14VF models, which stand out for their remarkable features, advanced technologies, and exceptional performance.

The 14VFS model is engineered for versatility and efficiency, making it ideal for a wide range of manufacturing requirements. It boasts a robust design, ensuring durability while accommodating varied operational demands. One of its main features is the high-precision spindle, which allows for meticulous machining and tight tolerances. This is crucial in industries that require intricate components, as it ensures each part meets stringent quality standards.

In addition to its precision capabilities, the 14VFS integrates state-of-the-art CNC technology. This sophisticated control system enables users to program complex machining tasks easily, leading to increased productivity and reduced setup times. The user-friendly interface simplifies operation, making it accessible for both experienced machinists and newcomers alike.

On the other hand, the 14VF model emphasizes speed and performance. Equipped with powerful motors and a high-speed spindle, the 14VF is designed for rapid production cycles without compromising on quality. This model excels in high-volume manufacturing settings, delivering consistent results while minimizing downtime.

Both models feature advanced cooling systems that maintain optimal temperatures during operation, preventing overheating and extending the lifespan of the machinery. The Anetsberger Brothers’ commitment to innovation is evident in the incorporation of energy-efficient technologies, which not only reduce operational costs but also promote environmental sustainability.

Additionally, the machines are designed with user safety in mind. They include various safety features, such as emergency stop buttons and protective enclosures, ensuring a secure working environment.

Overall, the 14VFS and 14VF models from Anetsberger Brothers represent a blend of efficiency, precision, and safety. Their advanced technologies and thoughtful design make them invaluable assets in the manufacturing industry, catering to the needs of various sectors while ensuring optimum performance and reliability. These machines epitomize the company's dedication to delivering high-quality solutions for modern industrial challenges.