Anetsberger Brothers 14VFS warranty Fryer Operating Instructions, Fryer Preparation for USE

Page 11

FRYER OPERATING INSTRUCTIONS

Normal operation of an ANETS Fryer requires that the kettle is filled with liquid shortening to above the lower indent level marked on the rear of the kettle, before lighting the fryer’s main burners.

!

CAUTION: Shortening MUST be in liquid form to avoid scorching or discoloration and possible damage to the kettle. Damage caused by melting solid shortening will NOT be covered by the warranty.

FRYER PREPARATION FOR USE

“BOIL OUT” INSTRUCTIONS

Before using the newly installed fryer for food pre- paration, clean the rust preventive material from the kettle:

1.Thoroughly wipe the interior of the kettle with clean cloths. Open the front door on the lower portion of the fryer to access the drain ball valve. Open the drain ball valve (by aligning the valve handle with the drain ball valve) and wipe the entire drain line clear of rust preventive material.

2.Close the drain ball valve (turn the valve han- dle cross-wise to the drain ball valve). Fill the kettle with water to about 3from the top. Add 1 to 2 cups of low sudsing soap powder, washing soda (trisodium phos- phate), or deep fat fryer kettle cleaner.

3.Perform the Lighting Procedure for the fryer. (Refer to the Lighting Procedure later in this manual.)

4.Set the thermostat to 190°F. Heat, but DO NOT boil the water. Stir the water to dis- solve the cleaning material.

5.Clean the fryer kettle for at least 20 minutes. Use a small hand mop (an optional brush can be ordered for this purpose) to clean the upper portion of the kettle (above the 3waterline) and the top rim of the kettle.

6.Shut down the fryer using the Shutdown Procedure for the fryer. Refer to the Shut- down Procedure later in this manual. Allow the water to cool slightly.

7.Open the front door and mount the drain extension to the drain ball valve. Position a

FRYER PREPARATION FOR USE

(Continued)

container (bucket) capable of holding VERY HOT cleaning solution beneath the end of the drain extension to hold the cleaning solution being drained, as shown in Figure 5.

Figure 5. Draining The Kettle

8.Open the drain ball valve SLOWLY, to avoid splashes while draining the cleaning solution from the kettle.

9.Close the drain ball valve (valve handle cross-wise) and remove the drain extension. Close the front door.

10.Safely dispose of the cleaning solution.

11.Fill the kettle with water to about 3from the top. Add 2 cups of vinegar to neutralize the cleaning solution.

12.Repeat steps 3 through 10 of this procedure.

13.Thoroughly wipe the interior of the kettle and the drain ball valve with clean, dry, wiping cloths to remove ALL water.

14.Dry the kettle thoroughly because any re- maining water can cause spattering of hot shortening when the kettle is later filled and heated.

11

Image 11
Contents Installation User Operation Maintenance Manual Contents Shipping Container Inspection Fryer GAS Supply SpecificationsCode Requirements Fryer Electrical SpecificationsCode Requirements Fryer Model 14VF/14VFS Site Installation RequirementsFryer Restraining Device Installation Instructions Installation RequirementsLEG Leveling Instructions Installation RequirementsLEG Installation Instructions Caster Leveling INSTRUC- Tions Caster Installation InstructionsCaster Leveling Instructions GAS Connection InstructionsFryer Operation Recommendations Fryer Preparation for USE Fryer Operating InstructionsFryer Operating Instructions Lighting ProcedureShutdown Procedure Frying Daily Cleaning Procedure Monthly Maintenance Instructions Problem Cause Remedy Fryer Troubleshooting GuideProblem Cause Fryer Troubleshooting GuideIgnite Fryer Troubleshooting Guide Limited Warranty

14VFS, 14VF specifications

Anetsberger Brothers, a prominent name in the field of precision machining and fabrication, has made significant contributions to various industrial applications. Among their notable innovations are the 14VFS and 14VF models, which stand out for their remarkable features, advanced technologies, and exceptional performance.

The 14VFS model is engineered for versatility and efficiency, making it ideal for a wide range of manufacturing requirements. It boasts a robust design, ensuring durability while accommodating varied operational demands. One of its main features is the high-precision spindle, which allows for meticulous machining and tight tolerances. This is crucial in industries that require intricate components, as it ensures each part meets stringent quality standards.

In addition to its precision capabilities, the 14VFS integrates state-of-the-art CNC technology. This sophisticated control system enables users to program complex machining tasks easily, leading to increased productivity and reduced setup times. The user-friendly interface simplifies operation, making it accessible for both experienced machinists and newcomers alike.

On the other hand, the 14VF model emphasizes speed and performance. Equipped with powerful motors and a high-speed spindle, the 14VF is designed for rapid production cycles without compromising on quality. This model excels in high-volume manufacturing settings, delivering consistent results while minimizing downtime.

Both models feature advanced cooling systems that maintain optimal temperatures during operation, preventing overheating and extending the lifespan of the machinery. The Anetsberger Brothers’ commitment to innovation is evident in the incorporation of energy-efficient technologies, which not only reduce operational costs but also promote environmental sustainability.

Additionally, the machines are designed with user safety in mind. They include various safety features, such as emergency stop buttons and protective enclosures, ensuring a secure working environment.

Overall, the 14VFS and 14VF models from Anetsberger Brothers represent a blend of efficiency, precision, and safety. Their advanced technologies and thoughtful design make them invaluable assets in the manufacturing industry, catering to the needs of various sectors while ensuring optimum performance and reliability. These machines epitomize the company's dedication to delivering high-quality solutions for modern industrial challenges.